On Sale

DATRON - LM21-001 - Reed Relay. Manufactured with an attached (1) 1N4148 diode.

Contacts: SPNO, Normally Open

Coil Voltage: 5 VDC (Actuates at Approximately 3.5V

Coil Resistance: 300 Ohms

Mount: PCB Through Hole

Overal Dimensions: 22.9mm Long x 7.3mm Square

Two (2) Leads Each End with 25.4mm (1.00") Spacing.

Double Marked: 30-7-2160-280.

Package: PCB Mount Low Profile. 

New Old Stock

 

Learn More

Deltrol - 20304-82 - 161P 27775-60 - 1819-73 - Relay, Power, 13A, 160 Series General Purpose.

• Class F Coil Insulation System for 155° C Total Temperature
• Coil Molded in Rynite® PET for environmental protection
• Unique armature stop maintains adjustment
• Fine wire gauge coils are skeined for integrity

Input: DC, Open Frame.

Contacts: DPDT.

Contact Ratings: 13Amp.

Coil Voltage: 24VDC.

Coil Current: 1.2 watt.

Coil Resistance: 480 Ohm.

Connections: Socket, PC Pins, or Solder.

Mech Mtg: PCB.

Packaging: Open Frame.

Mechanical Life: 10,000,000 Operations, Electrical Life 100,000 Operations

Alternate Ordering Information: 20304-82

Genuine Deltrol - New Old Stock.

Learn More

Relay, SSR. Input: DC. Contact Ratings: 20Amp. Coil Voltage: 36-530VAC. Connections: male 1/4" QC terminals. Mech Mtg: Panel, with two holes at 2.250" centers. Size: 1.832" long x1.503" wide x 0.563" high, plus connections. Overall with mount 2.632" long. Note: GZ Series. Input: 4-15VDC. Listed: UL/CSA. For max rating use 1 Deg C/W heatsink. Factory new, each NIB. More info: http://datasheet.octopart.com/84132010-Crydom-datasheet-13068463.pdf Learn More

GORDOS Reed Relay 741A-7,  74 Series SIP, Solid State Relay

Features: These Gordos Relays are molded in semiconductor-grade molding compounds that meet Underwriters Labortories 94V-0 flammability rating.

RF Characteristis 

• Insertion loss 0.3 dBA from 1 to 500 Mhz 
• Isolation: 30 dB min. from 1 to 600 Mhz.
• Characteristic Impedance 50, or 75 Ohms

Compatible with automatice insertion.

Logic compatible.

4 Pin PC Mount

Nominal  Coil Voltage  - 24VDC

Must operate Voltage - 18.0 VDC

Must release Voltage -  2.4 VDC

Maximum Voltage - 35 VDC140529-3

Reed Relay SIP Dry SPST NO Contacts 1750 ohm coil

Note:Outer pins are the contacts, inner pins are 1750 ohm coil.

Alternates: 62F4042, W117SIP-5, JWS-117-5, HE3621A2400, 3-1393771-5

https://www.masterelectronics.com/datasheet/741a2.aspx?p=45172003

Learn More

3 pole 30/50HP 120V/60Hz-Coil, used guuaranteed Learn More

Contactors, auxiliary contact. 1NO. Series: A1. Mount: side. Learn More

Relay, I/O. Output: 3Amp 60VDC. Control: 18-32VDC. Learn More

SSR 3-32VDC IN/120VAC 10A OUT Learn More

Sensata - Crydom - H12CA4850 Relay, SSR.

Status: Discontinued

Contacts: SPST NO.

Operating voltage: 48-660VAC.

Current: 50Amp.

Control voltage: 90-140VAC.

Packaging: Hockey puck.

Mech: Hole and slot 1.7" spacing.

Body: 1.8 x 2.3 x 1.0"H.

Weight: 3.5 oz. UL CSA VDE.

Includes hardware.

More info: http://www.crydom.com/en/Products/Catalog/h_12c.pdf

Learn More

Relay, SSR. 15VDC 16mA Logic out. 10-36VDC in. Packaging: Module I/O. Learn More

Relay, SSR. Input: DC. Contact Ratings: Control: 9-18VDC. Output: 1Amp 5-200VDC. Connections: PC leads. Mech Mtg: Plug-in. Packaging: Enclosed, plastic. Note: Mini I/O Module. Learn More

SSR, silicon controlled rectifier. Used/Removed from equipment. Learn More

RELAY HERM SEALED 4PDT PLUG-IN Heavy duty Military Learn More

Reed Relays new NO 5VDC 1.0"Long x 3/8" pc-mt , attractive red. Learn More

I/O Modules 5VDC input 3A 3-60VDC out Red SS Relay 1 Form A (SPST NO) 1-11/16" wide x 5/8" deep x 1-1/4"high.The ODC5 output module is used for controlling or switching DC loads of 5-60 VDC. Each module provides 4000 volts (transient) of optical isolation between the field devices and the control logic. Learn More

Relay, mercury. Contacts: SPDT. Connections: 5 Pin. Mech Mtg: PCB. Note: High speed module. Learn More

Military 8-DIP Herm Sealed Dip Relay New bulk. Learn More

Relay, reed. Coil Voltage: 5 VDC. Switching Current : 0.25 Amps. Switching Voltage: 125 Volts. Mounting : PC Board. Learn More

Relay, solid state. Contacts: 15V 0.25A. Coil: 1.1-1.4VDC. Connection: 8 pin DIP. Electrical conf: DPST NO. Mech: DIP. Weight: 0.2 oz. Learn More

Relay, reed. Input: DC. Contacts: SPST. Coil Voltage: 5VDC. Mech Mtg: 8 Dip. Learn More

Relay, control. Input: DC. Coil Voltage: 2A 28VDC / 120VAC, 55VDC 220VAC 60Hz. Resistance: 5K Ohm. Connections: 8 Octal plug-in. Learn More

CORNELL DUBILIER - 683-826B

Contacts: DPDT

Contact Rating: 1Amp 24VDC 

Coil Resistance: 2200 Ohms

Connection: 8 Pin

PBC MOunt

Enclosed.

Dimenasions: 0.75 X 1.2X 1.1"H

Learn More

CORNELL DUBILIER - 643-28V - 683-28V Relay, Power.

Input: DC.

Contacts: DPDT.

Contact Ratings: 2Amp.

Coil Voltage: 28VDC.

Coil Resistance: 3200 Ohm.

Connections: 8 Pin.

Mech Mtg: PCB.

Packaging: Enclosed, plastic.

Size: 19.2mm wide x 31.0mm deep x 29.4mm high.

Learn More

4PST 2 N.O. 2 N.C 36VDC COIL Learn More