On Sale

TDR 28VDC 0.16 SEC Release Delay Explosion proof Enclosedwith 8 S hook contacts Double marked RP3763G3OVERALL 5" TALL x 2-1/4" DIAM. Chicago Ill. 3380-51170-7755 Conf AF30 (536) 3960 Learn More

CLARE - CR2M-1955 - SEALED CONTACT REED RELAY

1AMP 1 N.O. 1 N.C.

24VDC 530 OHM

Learn More

New Mercury Relays DPDT octal, metal. Learn More

Voltsensor Controller. Bistable trip with one adjustable setpoint / Voltage sensitive relay driver / solid state meter relay substitute - Precision DC voltage comparator - gold module with one set point - Output to 80% of supply voltage, up to 50mA, - trip point range +/-0.5VDC Stability <20uV/degC - Input Z >10Megohms - hysteresis <100uV - Sensitivity & Repeatability <50uV - Power Required +/-12 to +/-25VDC. Mount: PCB, 9 pin, gold. Dimensions: 1.5" square x 0.70" high. Learn More

obsolete VOLTSENSOR / Bistable trip with adjustable setpoint / Voltage sensitive relay driver / solid state meter relay subsitute - Precision DC voltage comparator - gold module with set point - outputs - output level to 80% of supply, to 50mA - trip point range 95% of supply voltage <1mV/decC - Input Z 100Kohms - VOLT SENSOR 1-525-2 9-gold pins on bottom of 1.5" square module Learn More

28VDC 3-Pole Normally Open contacts Hermetically Sealed - Large can approx 2.35" dia x 4.6" Tall - 3 mounting screws - Eight wire solder hooks - Bet they can't afford to make 'em like this anymore - Schematic on can - New, old stock 19oz Learn More

48VDC DPDT-2Amp Half-Size Crystal Can, Welded, Dry Circuit to 2 Amps, 2.8K-Ohm Coil 8-Pin PBC mount Hermetically sealed. Max coil voltage 59, Dbl marked AR410-2 http://www.babcockinc.com Learn More

FT20U-1.1 Current Adjust Size O 3-Phase 3-Pole 24Amp Contactor with Press-to-Test Max. 600V E-Phase w/ FT20U-11 Aromat Green Power Therma; Adjustable Current Manually Resettable Current 0.7 - 1.1Amp Auxiliary Relay. Dial Setting New Old Stock - Rare Made in Japan Learn More

Relay, SSR. Input: 5VDC logic. Contact Ratings: 2.5Amp. Coil Voltage: 240VAC. Mech Mtg: 1.0x1.4x-.60"above board, (6) 0.38"L leads. Weight: 1 oz. Alt P/N: GB14430-05S. Learn More

2 Pole 1Amp 10-Dip PCB mt relayPanasonic/Aromat/Nais Manuf in Japan Learn More

American Zettler - AZ941-1CH-5DE - DIP RELAYS 5VDC 5A 125VAC EPOXY SEALED 8.9VDC CONT 70-OHM MUST OPERATE @ 4.0VDC

Contact Material: Cadmium, Silver

Mount: Through Hole

Number of Pins: 5

Weight: 13 g

Coil Current: 71.4 mA

Coil Resistance: 70 Ω

Coil Voltage (DC): 5 V

Max Current Rating: 6 A

Operating Temperature: -40 °C to 85 °C

Max Voltage Rating (AC): 300 V

Max Voltage Rating (DC): 150 V

Operate Time: 6 ms

Termination: PC Pin

Throw Configuration: SPDT

Learn More

NEW 4-PIN DIP RELAYS BULK Learn More

Relay, reed. Coil: 5VDC (7.5VDC max). Coil Resistance: 500 Ohm. Note: Form 1A, no diode. Package 4-sip epoxy molded sub-miniature. Socket pulls/used. Learn More

1AMP 12VDC 1 form C NEW DIP RELAYS Standard Duty: 1 A at 30 VDC - 0.5 A at 120 VAC 0.4 x 0.6 x 0.425" above board/socket Learn More

5VDC NEW 8-DIP REED RELAYS BULK WITH INTERNAL DIODE 7.5VDC MAX 500-OHM +/-10% MUST OPERATE AT 3.8VDC MUST RELEASE 0.5VDC Learn More

American Zettler - AZ942-1CH-24D - Relay. DC.

Configuration: SPDT

Contactor: 24VDC 16A.

Coil: 24VDC, pull-in at 19.2VDC 1600 Ohm.

Coil Current: 15mA

Coil Resistance: 1.6K Ohm (1600 Ohms)

Operating Temperature: 100 C

Operate Time: 10 mS

Max Voltage: 300VAC / 30VDC

Number of Pins: 5

Mount: PCB Solder

Electrical Configuration: SPDT.

Mounting: PCB. Miniature.

Plastic Enclosure.

Learn More

24VDC 8A DPDT PCB MT RELAYS Learn More

AMPERITE - 115C5 Relay, time Delay.

Input: 115V AC/DC.

Contacts: SPST-NC.

Contact Ratings: 3A/125VAC.

Coil Voltage: 115V AC/DC.

Coil Current: 2W.

Connections: 8-pin octal plug.

Mech Mtg: 8-pin glass tube.

Size: 1.25"D x 2.75"H above socket.

Weight: 0.5 lb.

Timing Range: 5 seconds.

Note: Hermetically sealed, heater-actuated.

Proudly Made in USA

Vintage Amperite - New Old Stock

Learn More

48VDC SPDT-10Amp Switching Miniature pcb mount 3300-Ohm 10% 10Amp 24VDC or 115VAC 1/4HP Motor load. New. Learn More

AMPERITE - 26C60 Relay, Thermal Timer.

Contacts: SPST-NC.

Coil Voltage: 26VAC/26VDC.

Maximum AC Voltage Rating: 115V.

Connections: 6 Pin Octal in an 8 Octal base.

Timing Range: 60 Second.

Proudly Made in USA

Learn More

American Zettler - AZ428-70-40LUS Relay, Control.

Input: DC.

Contacts: DPDT.

Contact Ratings: 24VDC.

Coil Voltage: 2Amp (2Amp 115VAC, 2Amp 26VDC).

Coil Current: 35mA.

Coil Resistance: 680 Ohm.

Connections: PC pins.

Packaging: Enclosed, plastic. Size: 0.7" x 0.93" x 1.2" high.

Note: New, Gold Crossbar Contacts.

Learn More

relay DPDT hermetically sealed 390-ohm coil=24vdcMARKED 26.5V Learn More

Power Terminal Block 600V 115Amp forBulletin 1492 Learn More

One Normally-Closed and One-Normally-Open 10Amp contacts - OFF-DELAY Pneumatic Timer 0.2 - 60 Seconds 120V-60Hz screwdriver-adjust from top - 4.77"high x 2.52" x 3.27" - New in old box, with spec sheet - Mfg in Japan Learn More