On Sale

EMERSON THERM-O-DISC - 36TX22 13038 F230-40 - Thermostat, Thermal Cut out. F230-240, Normally Open.

The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC.

Thermostat, thermal cut out.

Thermostatic switch, bi-metal 1/2" (12.77mm).

Contacts: (2) 0.17" solder term, one on each side. 

Set Point: Normally Open contact closes at 230F and closes when temperature lowers to 190F.

Mount: panel, round 17.7mm with 24mm centers

Two male 3/16” (4.8mm) quick connect Blade Terminals which can also be soldered.

Snap Action SPST Contacts Automatic Reset

Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

Proudly Made in USA - New Old Stock

Learn More

EMERSON THERM-O-DISC - 36TX21 13039 L200-25 - Thermal cut out. L200-25.

The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC.

L200-25 Bi-metal - 1/2" (12.77mm).

Mounted on flange with 15/16" Centers NC opens on temp increase. 

Package: 1/2" (12.77mm), solder terminals.

Two male 3/16” (4.8mm) quick connect Blade/Solder Terminals 

Snap Action SPST Contacts Automatic Reset

Set Point: Normally Closed Contact opens at 200F and closes when temperature lowers to 175 F. 

Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

Proudly Made in USA - New Old Stock

Learn More

Stemco - 402-396 L200H7 Thermal Cutoff Switch. Normally Closed L200, 170 Degree.

Bi-Metalic Disc, Snap Disc, or Snap Switch thermostats are bimetal mechanical thermostats that function via the thermal expansion and contraction of a bimetal disc that “snaps” from a convex to a concave shape at a set temperature. When the disc “snaps”, it either completes or interrupts a circuit. Snap Disc thermostats have many practical applications. They are used to ensure the process temperatures do not exceed the thermal limits of the equipment or process. The most common application for a snap switch or snap action thermostat is as an over-temperature protection (or OTP) failsafe.

Because of their small size and low mass, the response time of the snap switch design is extremely rapid compared to other commercially available thermostatic devices. Additionally, the bimetal element of a Snap Disc does not carry the current, but acts as the force to open and close the contacts. Thus snap action thermostats have a long life at relatively high currents – up to 16 amps for the ½ inch series – making snap switches the first choice of many OEMs.

Stemco 402 Series Automatic Snap-disc Autou Reset Thermostat.

Thermal Cutoff. Normally Closed SPST Switch L200, 170 Degree.

Mount: Surface, Two slotted mounting holes 1.65" apart.

Current/Voltage Ratings: 15A, 120 VAC 

Male 1/4" lugs spaced 1.75" apart.

Life: >100,000 Cycles

Proudly Made in USA

Applications for Disc Thermostats include: Coffee Makers, Washer & Dryers, Dishwashers, Electric Heaters, Ovens, Gas Furnaces, Fireplaces, HVAC, Electric Signs, Greenhouses, Pool Systems, Freezers, Refrigerators, Spas, Vending Machines, Security Systems, Motors, Light Fixtures, Power Supplies, Microprocessors, Business Machines and Table Top Appliances.

Learn More

Thermal cutout. NC 15Amp L140. Male 1/4" QC 1.7" apart, mounting slots 1.7" apart.

Learn More

Thermal cutout. NC 15Amp, opens at L170. Male 1/4" QC 1.7" apart, mounting slots 1.7" apart.

Learn More

KLIXON - MRF78EV Thermostat, Thermal Cut Out.

Normally Closed, Open up at an unknown temperature.

Dimensions: 26mm dia x 21mm tall.

Adjustment Stem.

Applications: Automatic Motor Protection

Learn More

Sensata Klixon - C4344-198-15 - 3100-3-322 Thermal cutout. SPST NC 450 Deg F.

The Klixon® 4344 precision thermostat is constructed with a snap-acting bimetal disc, which serves as the actuating element. As the temperature reaches a pre-determined calibration point, the disc snaps to its reverse curvature producing a crisp, positive switching action inherent to Klixon® thermostats. This feature assures reliable, consistent operating temperature over a long cycle life. The standard thermostat is copper-nickel plated with silver contacts

Note: Elmwood/Honeywell 3100-3-322 

SPST Snap Action Normally Closed Contacts

Normally Closed: Limit type application; contacts open on temperature rise at a predetermined (450F) temperature to de-engergize the circuit. Contacts automatically re-close as the device cools to a pre-determined (410F) temperature.

Contact Rating: Life Cycles 100,000 Cycles = 30VAC/DC@5A, [email protected], 250VAC@1

Contact Rating: Life Cycle 5,000 Cycles = 30VAC/DC@7A, 125VAC@6A, 250VAC@3

Ambient Temperatur Range: -80F to 550F (-62.2 Cc -287.8C)

Case: small metal disc 15.3mm D round on a oval base with 24mm mount centers, 2 teflon lead wires 4-3/4" long.

Overall 9.0mm tall max.

Inventory has either White or Blue Teflon Lead Wires,

Additional: https://www.sensata.com/sites/default/files/media/documents/ourproducts_Thermostat_4344_datasheet.pdf

Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment •  Automotive  • Microwave ovens

Proudly Made in USA

 

 

Learn More

Elmwood Sensors - R1-354 F190 - Thermal Switch, Bi-Metal Thermostat, Normally Open Elmwood Sensors, a Honeywell brand, make custom heating solutions for virtually every heatable application, in every industry, and every operating environment. Elmwood Sensors meet ISO 9001 certification, is recognized by numerous approval agencies, and has its own fully equipped Class 1000 clean room facility to take its quality control a step further. Elmwood Sensors Inc – R-354-F190 Bi-Metal Thermal Cutout has a Snap Disk Auto Reset Normally Open Contact - Closes at between 190-208F. Elmwood Sensors / Honeywell - R1-354 F190 Thermal Switch, Normally Open Normally Open Contact Closes at 190-208F and reopens at approximately 150 F Connections: 0.185” Quick Connect or Solder Terminals Dimensions: Approximately 0.625" Diameter x 0.54" High. Large Inventory with High Percentage Pre-wired by Manufacturer with an inch of fine braided wire on each side. New Old Stock – Never Used – Many Pre-Factory soldered with Braided wire on each terminal. Learn More

MDI - GB20W1000 Mechanical Float Switch, Normally Open These high quality float switches are designed for pump duty high temperature loads. The float switch is as normally open or pump down (circuit is complete when the float is elevated). The float cord is intended to be attached to a vertical pipe a band clamp, cable tie or tether clamp. As an option the float can be installed with a cable weight as the pivot point. This float has skived ends, where the insulated wire leads inside the cable are intended to be wired into other system components inside a junction box. MDI float switch was designed for extra nasty locations where there is sewage and suspended solids. Normally Open switch hanging downward from the cord closes when the float rises 45 degrees above horizontal and remains closed until the float drops 45 degrees below horizontal. High Temperature Pump Duty Mechanical Float Switch Precision Molded Float. Contacts: 13A@120/240VAC, 1/2HP. Normally Open Contacts. Sealed and approved for septic and sewage systems. Chemical Resistant Blue Non-Toxic 1010 Polycarbonate/ABS. Max. Operating Temperature: 180F/82C, 10ft/16-2 SJOW Cord. Float Body Dimensions: 4.625” Length x 2.625” Diameter Exceeds Dayton Float Switches Specifications. Alternates: GF2OW2000, PT3OT2000, HF20U4000W Applications: Sump Pump, Lift Station, pump Control, Septic Tank, Alarm. UL, CSA & CE Approved Proudly Made in USA. Retails for over $60 Learn More

Miniature shielded transformer. Package: 10 pin PCB mount.Double marked 92DJ20. No other info available.

Learn More

LESLIE LOCKE - DFS-1 Ceiling Fan / Swag Lamp Hardware Kit, 20 Foot 18AWG Cord. LESLIE LOCKE - DFS-1, Ceiling Fan Swag Lamp Kit, good for hanging lamps/lights or track lighting. Heavy Duty cord and 18’ of decorative chain. Universal: The vintage look and classic design add retro/simple style to your beloved house, an ideal house decoration hardware. For use when there is no overhead electrical source outlet. Used with Ceiling Fan Model Numbers DF-361, DF482, DF483, & DF484 Includes 20' Long 3 Conductor 18AWG cord w/grounded, 18' Decorative Antiqued Chain, 2 Swag Hooks, 3 Wire Nuts, Plate, Bushing, Enclosure Plate, Instructions. Packaging: 6” x 6” x 4” Manufacturer’s box weight 3 lbs. Installation package come with the instruction and Screw accessories for easy install. Origin of Materials: USA, Canada, and Japan. New Old Stock Learn More

1.5K 1/4W 1% MF RES package of 25

Learn More

KINGBRIGHT - SC56-11EWA Opto Display.

7 Segment single digit, numeric, 0.56" (14.2mm).

Series M. Common anode, RHDP.

Gray face, white segments.

Color: HER, lens white diffused.

Package: 10 Dip.

Learn More

BOURNS - 3329W1-102 - Resistor, trimming.

Resistance: 1K Ohm.

Power 0.5 watt.

Tolerance: 10%.

Single turn, cermet.

Side adjust.

Case: Round: 0.260" x 0.240".

Mount: through-hole.

Note: Series 3329 sealed.

3329W-001-102.

Learn More

ALTERA - EP610DC-25 - IC. ELPD Programmed Erasable Memory. 

Used, Clean Socket Pulls

 

 

Learn More

Hitachi - 2SB337 Transistor, PNP Germanium.

Status: Discontinued

Maximum Collector Power Dissipation (Pc): 12 W

Maximum Collector-Base Voltage |Vcb|: 40 V

Maximum Collector-Emitter Voltage |Vce|: 30 V

Maximum Emitter-Base Voltage |Veb|: 1 V

Maximum Collector Current |Ic max|: 7 A

Max. Operating Junction Temperature (Tj): 90 °C

Transition Frequency (ft): 0.125 MHz

Forward Current Transfer Ratio (hFE), MIN: 50

Package: TO-3 Steel

Note: New Old Stock - Highly discounted due to transistor are operable but may not meet all of the original manufactures specifications completely. One customer reportedly did some testing on a sample and reported transistor worked fine but did not meet all specs. Over 700 Transistors sold with no returns.

Made In Japan

Genuine Hitachi - New Old Stock - Rare

Alternates: ECG 104, ECG 121, NTE 104, NTE 121 

Learn More

OHMITE - 22J120 Resistor, power.

Resistance: 120 Ohm.

Power: 2 watt.

Tolerance: 5%.

Technology: wirewound.

Package: axial.

More info: http://www.ohmite.com/catalog/pdf/20_series.pdf Series 22.

Package of 5 

Learn More

OHMITE - 43F120 Resistor, ceramic.

Resistance: 120 Ohm.

Power: 3 Watt.

Tolerance: 5%.

Package: axial leads.

Technology: wirewound.

Note: Silicone conformal coated.

Series 44.

Learn More

Resistor, ceramic. Resistance: 120 Ohm. Power: 5 watt. Material: ceramic. Enamel coated. Technology: wirewound. Package: axial leads. Dimensions: 0.250" D x 0.915" long. More info: http://www.ohmite.com/catalog/pdf/20_series.pdf

Learn More

Resistor, ceramic. Resistance: 800 Ohm. Power: 1 watt. Tolerance: 5%. Technology: wirewound. Package: axial leads. Note: Enamel coated. Series 22.

Learn More

KLIXON - MRF59EV Thermostat, thermal cut out.

Thermal switch. 

 

Learn More

Transistor, NPN. Max voltage: 40VCEO, 60VCBO. Max current: 200mA. Dissipation: 300mW. Package: SOT-23 SMD molded plastic. P/N: MMBT3904. Operating temperature: -55 to 150 Deg C. Package of 100. Note: Small signal. Epitaxial planar. From: Manufactures new T/R. Learn More

MOSTEK - Z80CPU 0-70C - MK3880N-4 - 4MHZ PROC

General information

Type: CPU / Microprocessor

Family: Mostek Z80

MK3880N-4 is an OEM/tray microprocessor

Frequency: 4 MHz

Package: 40-pin plastic DIP

Socket: DIP40

Size: 2.05" x 0.54" / 5.21cm x 1.37cm

Architecture / Microarchitecture

Manufacturing process: N-channel silicon gate depletion load technology

Data width: 8 bit

Physical memory: 64 KB

On-chip peripherals: Dynamic memory refresh counter

Electrical / Thermal parameters

V core: 5V ± 5%

Minimum/Maximum operating temperature: 0°C - 70°C

Maximum power dissipation: 1.05 Watt

Double marked MK3880N-4

New

Learn More

IC, CMOS. Dual D-type flip-flop. Package: 14 Cdip. Note: Military JM38510 type. Cross: 4013BMJ.

Learn More