On Sale

EMERSON THERM-O-DISC - 36TX21-13126 L203-36 - Thermostat, Thermal Cut. L203-36. Normally Closed Contacts

The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC.

Thermostat, thermal cut out.

Temperature. Snap-action.

Mount: SMD bracket with (2) 1/8" male quick connect terminals.

Mount: Panel, round 17.7mm with 24mm centers

Two male 3/16” (4.8mm) quick connect Blade Terminals which can also be soldered.

Snap Action SPST Contacts Automatic Reset

Set Point: Normally Closed Contact opens at 203F and closes when temperature lowers to 167F. 

Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

Proudly Made in USA - New Old Stock

Learn More

RCA - RADIX GROUP INT'L - 1468150-7 - Speaker.

Full Range Dual Cone Speakers.

16 Ohm

6oz magnet whizzer cone.

Size: 5" x 7".

Made in Japan

Learn More

Unidentified Manufacturer - HC-6/U - Quartz Crystal Socket / Holder - 2 Pin.

Mounts with a Single Screw (3.30mm Diameter, 0.130").

Contact Material: Nickel Plated Brass

Material: Thermoplastic.

Voltage Rating: 2000 Vrms 

Current Rating: 5 A

Pin Spacing: 0.487"

Color: Brown.

For Repairs/Restorations/Projects 

Mates with HC6/U Crystals

Vintage Thermoplastic Crystal Socket

Fits military crystals CR-7, CR-18/U, CR-23/U, CR-27/U, CR-37/U, CR-48/U, CR-52/U, CR-81

Alternates: HC-6/U, HC-13/U, National FT-243, CR 27/U, AF4K, CEA 5CCS-6, NSN 5935-636-8408

Applications: Crystal Socket for Amateur Ham Radio & CB Radios

Proudly Made in USA - New Old Stock 

Learn More

Potentiometer, slide. Resistance: Dual 5K Ohm. Distance of travel: 36.8mm. Mount: PCB or Panel. Dimensions: 45.2mm long x 10.8mm wide x 12.5mm high. Contacts: solder.

Learn More

Panasonic - Matsushita - Duke - JSU18X156AQN Capacitor, AC. Non-polarized, Dry Film Stack.

Motor Start/Motor Run. 15uF 180VAC. JS181156SPQV, MFB180V15-SPQV, 216236200.

Mount: Panel, Single hole 3/4" from center.

Dimensions: 1.566" long x 1.068" deep (plus mount area) x 1.263" high.

Contacts: Two Male 3/16" QC Terminals.

Operating Temperature: 70 Deg C. (158 F)

Alternates/Replacements/Supersession P/Ns - 5304464438, 218909913, 1381223, 216236200, 216236300, 5304464438, 216985003, 218719201, 218909913, 3015552, 3017761, 3091424, 5303289028, 5303310070, F3000399, F300399, 5304464438, AP4315853, 1381223, 218909901, 5303289028, AH2333670, EA2333670, F00300399, F00399, PS2333670, BOOEOCHUU and others.

Used in freezers, refrigeration, ceiling fans, lighting, and even crossover for speakers.

Excellent upgrade replacment for 12uF Motor Run Capacitors in many consumer applicances.

Replaces Duke JSU18X156AQP 15uF 180VAC 50/60Hz Capacitor Motor Conveyor.

This capacitor fits the following models: Duke FBB, Duke FBB-120, Duke FBB-NO-120, Duke FBBT-NC-120, Duke FBBT-NO-120, Duke FBBT-PC-120, and Duke FBBT-PO-120.

Made in Japan

Learn More

HUBBLE - HBL4720C Connector, Power.

Hubbell Wiring Device-Kellems - Screw Terminal, Insulgrip Series

• Individually molded face for each blade configuration
• Roomy wiring chamber provides ample space for wiring
• Ribbed nylon housing provides a secure grip that’s impact and chemical resistant

Wire: 8-16 AWG, Cord Diameter: 0.230" - 0.720"

Housing Gender: Plug.

Contact Gender: Male.

Circuit Count: 3.

Contact Ampacity: 15Amp.

Insulation voltage: 125V.

Diameter: 38.9 mm

Retails New $14.50 Each

Proudly Made in USA

Note: Twist-lock. Used/Removed from equipment - Cut Cord/Dirty Cosmetics/Fully Functional.

 

Learn More

Motorola - JANTX2N2219A  Transistor, NPN.

Max voltage: 40VCEO, 75VCBO.

Max current: 800mA.

Dissipation: 800mW.

Package: TO-5.

Operating temperature: 175 Deg C.

Application: High speed switching.

Note: Silicon planar epitaxial.

Military type JANTX.

Learn More

FAIRWAY LINE PROJECTOR

Learn More

S02 MONITOR LAMP 12V 50 WATTS (for max. life operate at 9.5 VDC)

Learn More

BROWN POWER RECEPTACLE 50 AMP 125 VOLTS

Learn More

WATLOW - G1JX93A - FIREROD Cartridge Heater. Heating Element 115 VAC 300 Watt.

The FIREROD cartridge heater revolutionized the heating element industry in 1954 when it was patented as the first swaged cartridge heater. The mechanical procedure of swaging reduces the diameter of the heater by compacting the unit; this directly improves the heat transfer and efficiency of the heater. FIREROD cartridge heaters are built using only the finest materials and construction methods and are backed with extensive quality assurance programs. With premium materials and tight manufacturing controls, the FIREROD heater provides superior heat transfer, uniform temperatures, resistance to oxidation and corrosion and a long life even at high temperatures. FIREROD offers many delivery programs to meet your needs.

The Watlow FIREROD heater revolutionized the heating element when it was introduced. With premium materials and tight manufacturing controls, it continues to provide superior heat transfer, uniform temperatures, and resistance to oxidation and corrosion even at high temperatures.

Incoloy 800 provides high temperature resistance to oxidation and corrosion, proving far superior to 304 stainless steel alloys used by other manufacturers.

Voltage: 115VAC

Power: 300 Watt 

Current: 2.6 Amp

Dimensions: 9.4mm (0.370" ) Diameter x 37.1mm (1.464") Long

Swaged in 2 Radial Leads, Lead1 = 4.5" Long, Lead 2 = 6.5" Long.

Typical Applications: Semiconductor chamber heating, Semiconductor wire and die bonding, Freeze protection and deicing of equipment in cold climates or applications, Humidity control, Patient comfort heating used in medical devices, Mold die and platen heating, Seal bars used in packaging equipment and Test sample heating in gas chromatography equipment.

Made in USA

Learn More

3M 3428-1002 or Berg 65823-021/069/165 Connector, header. Shrouded. Housing gender: plug. Contact gender: male. Circuit count: 20 Pin. Mounting type: PCB, RA. Pin spacing: 2.54mm. Note: Without ejector latch. Bulk Packaged.

Specify if preferenced - Berg, 3M or Thomas & Betts/Anslay 609-20 

Learn More

Dual 6 PIN Phone Jack [Wall Plate Style] RJ11/12 Jack

Learn More

Amphenol - 8-4943 - DC37P

3 Part IDC Type DC37P Ribbon Cable connector, (Male)

37 - Pin , 2 Row Male Plug Crimp Port

Gold Plated Pins

New Old Stock

Learn More

CW Industries - Alpha Wire Co. - CWR-130-40-0000 Connectors, IDC.

Wire to board, 40 Pin.

Mount: PCB.

Dimensions: 2.075" long x 0.724" wide x 0.355" high.

Pin spacing 0.10" (2.54mm) x approximately 0.619" (15.7mm).

Wire gauge 28-30 solid/Stranded,

Gold contacts/pins, 

Color: Blue.

Learn More

Female Faucet Aerator with screen & hardware.

Learn More

Molex Beau Interconnect System/Vernitron - 0387112204 - TS04-05 - Connector, Terminal Block.

Circuit Count: 4 Single Row.

Low Profile

Mounting Type: Thru Chassis mount.

Outside Dimensions: 2-3/8" long.

Learn More

Elmwood/Honeywell Sensors Inc - L115 3100-35-1 – 74/50 - Bi-Metal Thermal Cutouts with 12" Leads, NC, New. The 3100 Series consists of a single pole, single throw switch activated by a snap-action bimetal disc. Temperature calibrations are pre-set at the factory and each unit is 100% thermally and mechanically inspected. It is available to open or close on temperature rise. The case is laser welded to form a hermetically-sealed steel housing with a glass-to-metal seal at the terminal junction. It is manufactured and tested to meet or exceed critical commercial and industrial specifications. • Hermetically sealed • Tight tolerances • Tight differentials • Auto-Off • Electrical ISolation Contacts: Normally Closed (NC) SPST Contact Operation: Opens at 115 F Connections: Sealed wire 12” Long Voltage/Current Ratings: 30 VDC/VDA @ 7A, 120 VAC @6A, 240VAC @3A Mount: Screw Lange Precision Thermal Cutouts New 74/50 with 12" leads. Dimensions: Body Height 0.735” x 0.605” Diameter (18.67mm x 15.37mm) Applications: Computers, Medical electronics, Power supplies, Industrial controls, Test equipment, Infotech Approvals: UL, CSA New Old Stock Made in USA Learn More

Lot of 20 - 069-3322 – 34WWSP - Hardware, Extra Thick Fender Washers 430 Stainless Steel. For 5/16" Bolts. A fender washer is a flat washer with a larger outer diameter in proportion to its center hole. They are designed to spread the load on thin sheet metal. Interestingly, they are named after their use on automobile fenders. Extra Thick Fend Washer 0.120” Thick Dimensions: 2" OD x 0.343” (11/32) ID Material: 430 Stainless Steel Hardware, Extra Thick Fender Washers 430 Stainless Steel. For 5/16" Bolts. A fender washer is a flat washer with a larger outer diameter in proportion to its center hole. They are designed to spread the load on thin sheet metal. Interestingly, they are named after their use on automobile fenders. Extra Thick Fend Washer 0.120” Thick Dimensions: 2" OD x 0.343” (11/32) ID Material: 430 Stainless Steel Package of 20 • Fender washers offer a bolt or screw a wider bearing surface that will disperse the load weight to a greater surface area and ensure that the nut or bolt is pressed up against a smooth surface reducing the chances the fastener loosening over time because of contact with an uneven surface as well as keeping a fastener from pulling through a hole that is larger than the diameter of the head. • A fender washer though similar in shape to a standard washer the outside diameter is much larger in proportion to the center hole. • Made of stainless steel offers a high level of chemical and corrosion resistance and strength that will outperform and outlast zinc plated fasteners for years without the need to perform costly and time consuming maintenance. • The vast majority of stainless steel fasteners are produced with metals from the austenitic family. Their high levels of chromium and nickel provide tough corrosion resistance and the ability to withstand considerable physical strain without fracturing, albeit at a higher cost than the martensitic varieties. • These Fender Washers are made of Grade 430 Stainless Steel which is Magnetic (Does not contain Nickel) and will outlast washers made of steel or zinc for years to come. Made in USA Learn More

LOGIC ANALYZER 9" COLOR DISPLAY - TOUCHSCREEN CONTROL- RS-232 & HPIB W/ 10448A 80-CH 35MHz/100MHz TIMING CARD W/ 5 PROBE POD CABLES - 16530A OSCILLOSCOPE TIMEBASE 400 MEGASAMPLE/s & 16531A DIGITIZING OSCILLOSCOPE 2-CH 100MHz 400 MEGASAMPLE/s - (5) 5) 01650-63201 TERMINATION ADAPTORS - (1) 10433A 10:1 PROBE & MANY OTHER CABLE ACCESSORIES W/ OS VER 4.01 & DTR SETUPS REAR FLOPPY FAILS

Learn More

Chicago Miniature Lab - 1696 - Lamps & Lights.

Description: Incandescent, Clear, 500 Hours, 2" (50.8mm) MOL.

Voltage: 28V

Current: 0.42 Amp.

Power: 11.8 Watts

Candle Power: 10 MSCP.

Filament Type: C-2V

Shape: S8

Base: BA15d, DC Bayonet, Double Contact Bayonet

Genuine Chicago Miniature - New Old Stock

Applications: Medical, Marine, Commercial, Military

Alternates: Military 15584-11, BW.1696

Learn More

THERM-O-DISC - 36TR11 13191 L200-20F Thermostat, Thermal Cut out. NC L200-20F

Thermodisc The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap–action of the bimetal disc provides high–speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC, and 16 amps at 250VAC. The 36T carries global agency recognition and is used in a wide range of applications including coffee makers and other small appliances, gas furnaces, clothes dryers, and dishwashers.

Thermostat, Thermal Cut out. NC. Self-resetting.

Mount: panel, round 17.7mm with 24mm centers. 

Two male 3/16” (4.8mm) quick connect Blade Terminals which can also be soldered.

Snap Action SPST Contacts Automatic Reset

Surface Mount where Blade Terminals positioned at 90 Degrees

Set Point: Normally Closed Contact opens at 200F and closes when temperature lowers to 180F. 

Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

Proudly Made in USA - New Old Stock

 

 

Learn More

THERM-O-DISC - 41T14-L160-38116 - Press-to-Reset Thermostat L160 Manual Reset: This type of control is available only with electrical contacts that open as the temperature increases. The contacts may be reset by manually pushing on the reset button after the control has cooled below the open temperature calibration. 160 Degress F, Normally Closed Contacts Thermostatic Switch w/Button-on-Flange Mounts-on 1.9/16” (1.565”) (39.75mm) Centers L160-Degrees / Push Red Button to Reset. Heavy Duty – 8/32 Brass Screw Terminals Approximate Overall Dimensions: 2.25” Terminal Length x 1.85” Wide x 1.1 High Approval: UL and CSA Applications: Industrial, Commercial, Water Heaters & Furnaces New Old Stock Made in USA Learn More

THERM-O-DISC - 20MAA3FA – Normally Closed Contacts Motor Protecting Temperature Sensor Switch. The Therm-O-Disc line of Motor Protectors offers accurate and reliable protection against hazardous overheating in single phase/single voltage A/C motors. This motor protector employs a snap-acting, current and temperature responsive bimetal disc for proven performance over life. An internal resistance heater utilizes the effects of current to bias the operation of the bimetal disc for added thermal response. A wide range of bimetal and heater combinations are available to cover specific design requirements. This design flexibility and proven performance has made Therm-O-Disc Motor Protectors a popular choice among the leading manufacturers of fractional horsepower motors. The operating mechanism inherent to all Therm-O-Disc Motor Protectors is the snap-action bimetal disc. During abnormal conditions, heat generated by resistance and/or motor ambient causes the bimetal disc to snap at the specified calibration temperature. This allows the circuit to open within the maximum safe limits of the motor windings. Once the motor returns to a normal operating temperature, the bimetal disc resets automatically. This closes the circuit and re-energizes the motor. This same snap-action principle is utilized in millions of Therm-O-Disc products applied in the appliance, heating and air conditioning industries. The Motor Protector features include: • High-speed contact separation ensures long contact life. • Current and temperature responsiveness for excellent design flexibility. The Motor Protector series has been rated by major agencies throughout the world. The agency ratings can be used as a guide when evaluating specific applications. However, the mechanical, electrical, thermal and environmental conditions to which a control may be exposed in an application may differ significantly from agency test conditions. Therefore, the user must not rely solely on agency ratings, but must perform adequate testing of the product to confirm that the control selected will operate as intended in the user’s application. This is an over temperature motor protector which opens its contacts (SPST) when excessive temperature is sensed. Bimetal Resistance: 0.0015 Ohm, Heater Resistance: 0.0320 Ohm Temperature: Opens @ 110 C (230 F), Closes @ 45 C (113 F) Current Rating: 50A @ L.R. 120V, 37 A @ L.R. 240V Dimensions: 1.38" Wide x 1.32" X R2.50 Radius Curved 0.38" Thickness. Weight: 0.5 Ounce (15 Grams) Termination: Two Side Entry 1/4" Quick Connect Terminals. Applications: Commercial, Industrial, and Residential, Including Several Whirlpool, Maytag, Kenmore Dryer as a motor fuse. New Old Stock Made in USA Learn More