On Sale

Connector, header. Circuit count: 34 Pin. Pin spacing: 2.54mm. Note: Shrouded ejector latch. More info: http://multimedia.3m.com/mws/mediawebserver?66666UuZjcFSLXTt4Xfym8s6EVuQEcuZgVs6EVs6E666666-- Learn More

EATON - COOPER BUSSMANN - FRS60 - BP-FRS-R-60 - Carttridge Fuse.

60Amp 600VAC Interrupting. 

AC Rating: 200kA@600V, Low Voltage Fuse

Insulated end caps for 70-600 Amp fuses reduces exposure to live parts and extends air gap to distance between blades of adjacent mounted fuses or to housing.

Semiconductor Fuse, Dual Element.

Time delay.

Class RK5.

UL listed for optimum safety and reliability

Applications: Power panel boards, combination starters, machinery disconnects

New Old Stock

Learn More

BUSSMANN - NOS-50 - Semiconductor Fast Acting Fuse

Fast-acting, nonindicating UL Class H and K5 fuses are for general purpose use in existing installations that require a high-sensitivity, fast-blow fuse. These fuses are highly sensitive to changes in current flow and don't tolerate temporary overload currents or power surges, so they open within seconds of being exposed to overloads and short circuits. They have no indicator for identifying a blown fuse, so they're sometimes used with an indicating fuse block or cover.

Current: 50 A

Voltage: 600V  

Eaton Bussmann series NOS fuse Class H

Supplemental one-time fuse

Non current limiting

Light duty circuit locations

50 A, Class K5|Class H

Non-indicating

Ferrule end x ferrule end

50 kAIC at 600 Vac

Semiconductor Fuse One-Time Fuse

Alternates: 6HKRFB, H600, HM600, HM601, HM602, HM604

Learn More

OPTEK - TT electronics - OHD103-00R Hall Effect Sensor, NPN, open-collector output, latching.

These Hall-effect devices contain a monolithic integrated circuit which incorporates a Hall element, a linear amplifier, a threshold amplifier, and Schmitt trigger on a single Hallogic® silicon chip. Included on-chip is a bandgap voltage regulator that allows operation with a wide range of supply voltages. This devices feature logic level output and provide of 20 mA of sink current. This allows direct driving of more than 7 TTL loads or any standard logic family using power supplies ranging from 4.5 to 24 volts. Output amplitude is constant at switching frequencies from DC to over 200 kHz.

• Designed for non-contact switching operations
• Operates over a broad range of supply voltages
• Excellent temperature stability operates in harsh environments
• Suitable for military and space applications

Operates on 4.5 - 24VDC

Output Max 20mA DC.

The latch is reset (off) in one of two ways; by aligning a South magnetic pole with the front face or temporarily removing the bias voltage supply.(off).

The back face has a 45-degree bevel. Facing the leads. with the bevel down, the three leads are numbered 1-2-3 from left to right.

Positive (+) supply connects to pin 1, negative (-) common to pin 2 and the output to pin 3.

The output completes a switch to common when it is "on."

Applications: Non-contact switching operations, Brushless DC motors, Multiple pole magnets, Non-contact reflective object sensor, Assembly line automation, Machine automation, Machine safety, End of travel sensor, Door sensor

Learn More

OPTEK - OHD100 Hall Effect Sensor, NPN, open-collector output, non-latching.

Contains a linear amp and Schmitt trigger to provide sharp "on" and "off" transitions when a South magnetic pole aligns with the front face (on) and is then removed (off). The back face has a 45-degree bevel. Facing the leads. with the bevel down, the three leads are numbered 1-2-3 from left to right. Positive (+) supply connects to pin 1, negative (-) common to pin 2 and the output to pin 3. The output completes a switch to common when it is "on."

Designed for non-contact switching operations

Operates on 4.5 - 24VDC,

Output max 20mA DC.

Operating Temperature: ‐55 °C to +150 °C

New Old Stock

Learn More

IEE - LR1737R - Opto Displays.

Seven segment LED.

Numeric L and R decimal, 0.3" CA,

Red. Peak wavelength (m)=655n.

Package: 11 Dip in a 14 dip pkg.

Cross: IEE1737R.

Learn More

LED. Lightbar single segment. Series B. AlGaAs Red. Package: 8 Sip. Dimensions: 0.750" x 0.150" (19.05mm x 3.81mm). Learn More

Agilent Hewlett Packard - HDSP-N103 - 7-Segment 0.8" Red Opto Displays

20 mm Common Cathode Right Hand Decimal

Product: LED Displays    

Display Type: 7 Segment              

Number of Digits: 1        

Character Size: 11.07 mm x 20.32 mm    

Illumination Color: Red 

Wavelength: 637 nm     

Configuration: Common Cathode             

Luminous Intensity: 590 mcd      

If - Forward Current: 20 mA        

Vf - Forward Voltage: 1.8 V         

Operating Temperature:  - 20 C  to 100 C              

Mounting Style: Through Hole   

New 14-dip. 

 

Learn More

Unidirectional transient suppressor. 12V 1mA. Clamping voltage: 22V. Package: axial, Used/removed from equipment. Note: Silicon. Learn More

Relay, AC. Contacts: SPDT. Contact Ratings: 10Amp 1/3HP 125, 250VAC/10AMP30VDC / 15AMP 1/3HP 125, 250VAC. Coil Voltage: 240VAC. Packaging: Plastic enclosed. Note: 10Amp when used with a socket. Learn More

Relay, control. Input: DC. Contacts: DPDT. Contact Ratings: 0.25mA AC, 1Amp DC. Coil Voltage: 12VDC. Coil Resistance: 390 Ohm. Mech Mtg: PCB, TO-39-8 metal can long leads. Note: Military electromagnetic. Learn More

Resistor, power. Resistance: 17.5K Ohm. Power: 25 Watt. Tolerance: 1%. Technology: wirewound. Black housing. Dimensions:1-1/16" long x 9/16" wide x 9/16" high. Note: New older stock. Military RH25. More info: http://www.vishay.com/docs/30201/30201.pdf Learn More