Lamp holder

General Electric - EKZ - Lamp, Quartz. Complete with QCX-20 Socket / Holder and Mating Fiber Optic Cable.

Status: Discontinued

10.8VDC 30W.

Light Type" Incandescent

Complete with QCX-20 Socket/Holder.

Lumens: 400

Color Temperature: 3,100K

Bulb Dimensions: 2.0" High, 1.75" Length, 2.0" Width

Dimensions: Overall 2" square x 4-7/8" tall, plus cable.

Applications: Slide Projector Lamp & Chromascan Scan

Bulb UPC 043168993388

Used / Removed from Chromascan Scan Equipment

Made in USA

Learn More

DURA ELECTRIC - FS-5 Starter

Start your light fixture with ease and efficiency using the FS-2 Fluorescent Starter. If tube glows only at ends or if it blinks continuously, a new starter may be needed.

Fluorescent light starters install into preheat-start magnetic fluorescent ballasts. They provide a small amount of electricity that ionizes the gas inside a fluorescent bulb, allowing the gas to conduct electricity so that the bulb can light. Starters should be replaced when fluorescent lights begin to flicker or fail to light.

Connections: Standard Two Pin Design

With Long Life Ceramic Condenser

4/6/8 Watt Fluorescent Lamp Starter

UPC 78254701005

National Item Identification Number: 00-299-5962, 002995962, 6250-00-299-5962,                6250002995962

New Old Stock

 

Learn More

Lamp holders. Socket for bi-pin lamps, with shielded lens cap, 0.37" D. Threaded bushing, panel mount. Complete with hardware. Note: Military type, NSN 6210009448756. Learn More

DDR-Ruhla - Third Brake Stop Light Assembly, 12VDC, 21 Watt.

In North America, since 1986, all vehicles feature a third brake light. Legally, this is called the Center High Mount Stop Lamp, CHMSL for short, but informally called center brake lamp, high-level or eye-level brake lamp, cyclops brake light, or safety brake lamp.

Durable Thermoplastic Polymer Housing.

Narva® H21W Halogen Bulb is 21 watt with a Bayonet base.

Overall Approximate Dimensions: 7.0" Height X 5.50" Wide X 3" Deep.

Red lens 5.5" wide x 2.9" high.

Round (3.25") Mounting Base has three holes spaced approximately 2.16" apart

Approximate 90 degrees of adjustment. 

Solder lug connections. Wiring leads can exit either back housing or through bottom.

Applications: Automobile/Truck/Trailer Third Brake Light, Collision Avoidance Light, or Red Fog Light.

Other P/N Marking: RFS 8725.3 P25-1 & ZBL 8529.1 

RUCKWARTIGE LICHTSCHEIBENEBENE SENKRECHT ZUR FAHRTRICHTUNG

Quality German Manufacture by DDR-Ruhla.

New Old Stock

Learn More

Telephone wedge-stlye Lamp Sockets - about 0.7" long 0.5" Dia RED Top on a 1.4" long threaded barrel - with 2 nuts and solder terminals - NEW

Learn More

Leviton - 13351 - Lampholders/Tombstones.

This Leviton T8 or T12 low profile lamp holder is for use with fluorescent lamps having a medium bi-pin base.

Non-shunted Bi-pin Lamp Holders/Tombstones.

Low Profile, Slide-On, Snap-On, or Bolt-On Mount. 

Quickwire 18AWG Solid or Str Tinned.

For T8 LED Replacement and all T8/T10/T12 Fluorescent lamps, 600V 660 watt.

Listed: UL/CSA.

UPC: 041175370918

Package of 2.

Learn More

LEECRAFT - V C 25-212-1 Lamps & Lights.

Socket with 6" wire leads for midget grooved based lamps.

Package of 10.

Learn More

Lamps & Lights. Socket 15Amp 660 watt 125VAC. Adapter. Material: Bakelite. Medium base. Color: Ivory. Listed: UL. Note: Use only devices marked CO/ALR with aluminum wire. Package of 5. Made in the USA. Learn More

Industrial Devices - 2190C23 Lamps & Lights.

Panel indicator 12V.

Case: 0.3" OD with 13" wire leads.

Assorted number engraved on the lenses, 1, 3, 5, 6, 11, 13, BY and CL.

All are white except CL which is amber.

(Also the CL / Amber only have 5" leads).

Learn More

CHALLENGER - 696-DP.1 - Lamp Holder Surface Mounted Keyless, 660 W, 125 VAC, with 3rd wire Ground.

Heavy Duty Surface Mount.

Bakelite Keyless. 

Dimensions: 5" long x 1-7/8" wide x 2-1/8" high.

Very Sturdy in Challenger Packaging with Instruction documentation. 

Vintage - New Old Stock 

Color: Brown

Listed: UL. 

Made in USA

Alternates: Cooper Wiring 545B

 

Learn More

Dialco/Dialight - 162-8430-09-502 - Lamp socket for T1-3/4 bulbs.

Military-style, caps not included. See attached Data Sheet for various Caps (Stovepipe, Cylindrical, Flat, Convex, & faceted) that fit this base. 

Series:162, 178 Series

Description: Sub Miniature Panel Indicator

Lamp Type: Incandescent. Midget Flange

Terminal Lamp Type: MID. Flange Base

Terminal Type: Solder

Terminal Other: Two Terminals, Fully insulated

Mounting Hole Size: 15/32" Clearance Hole

Mounting Bushing: Aluminum

Metal Finish Desc: Black Anodized Finish

Mounting Hardware Description: Steel lock washer and hex nut.

For 1.35 to 28V lamps, midget flange, front panel mounting. 

Moisture Sensitivity Level (MSL): 1 (Unlimited)

Compliance: MIL-L-3661B

Excellent Condition - New Old Stock

Note: No Cap or bulb.

Learn More

PD9500 Lamp Jewel.

Jewel only, for pilot lights/panel lamps.

Color: Green.

Military style threaded metal base.

Approximately 0.64"ID.

Learn More

pull chain porcelain WHITE CERAMIC lamp sockets NEW ( CHAIN PULLS FOR THE SIDE ) Learn More

8-764 Lamps & Lights. Holder, Mini Screw Base.

• 100% Brand New and High Quality
• Miniature Lamp Holder (E10 Type)
• Plastic base with two screw terminal, Dual Mounting Holes
• The bulb holder is a sturdy unit with mountings that allow for easy connection to electrical circuits.

Surface Mount.

Socket: E10 Miniature Screw.

Miniature Edison Screw (MES), C6

Base Major Diameter (Thread External): 10 mm (0.394")  

For lamps; #406, GE#243, etc.

Dimensions: 35mm Diameter.

Color: Black.

Learn More

Vintage Jewel Lamp Lens.

Dimensions: 0.338" OD.

Slides into base 0.28" D.

Color: White.

Package of 5.

Learn More

Lamps & Lights. Lamp socket for single pin S C bayonet. Mount: flush, flange; 43.3mm long x 15.8mm wide x 1.3mm tick with 27.0mm centers. Socket dimensions: 16.4mm OD (15.5mm ID), x 23.2mm OD high. Lamp sits 13.4mm in. Wire leads, 9-1/2".

Learn More

Multicomp - SCB-72 - 4-081 - BA15S Lamp Socket / Holder for Single Pin Bayonet Candelabra.

BA15S Lamp/Bulb Socket

Bulb/Lamp socket (only) for Single Pin/Wire/Contact Bayonet Candelabra Base Bulbs.

Heavy Duty Grounded Metal Housing Support.

Watage Rating: 75W

Voltage Rating: 250V

Will fit #93, 1141, 1156 and other 155mm Base Bayonet Bulbs.

Push & Rotate Bulb Socket.

Sheel: Nickel Plated Steel

Color: Silver

Approximate Lead Length: 10"

Applications: Automotive, Marine, Industrial, Commercial. (Commonly used 12VDC Automotive/Marine)

New Old Stock

 

Learn More

Commercial Electric - Keyless Lamp, Socket. 120VAC.

Replace a socket or safely build a new light fixture with the versatile 2 in. Black Keyless Phenolic Lamp Socket. The keyless design is perfect for wall switch-operated lighting and its phenolic construction makes it durable and heat resistant. This 2 in. high socket features a 1/8-IP hickey and is threaded for standard, medium-base light bulbs. This socket also has a bracket screw terminal, is rated for 660-Watt, 250-Volt capacity for long-term indoor use, and is UL/CUL Listed for safety.

• Great for replacing old or worn out sockets in wall-switch operated lighting fixtures
• Phenolic construction for improved durability, heat resistance, and corrosion resistance
• Bottom wire connections allow for use with stranded copper wire or for attachment of leads
• Screw terminal construction enables easy and secure installation
• Compatible with medium-base light bulbs

Complete Wired and with Threaded Rod.

1/8-IP Hickey and uses Medium Base Bulb.

Application: Used in many types of lamp fixtures.

Standard Lamp Socket.

Approvals: UL, CSA for 660W and 250V

Applications: With a keyless design, this socket is best suited to wall switch-operated lighting fixtures. Its phenolic construction makes it exceptionally durable and heat resistant.

Alternates: #81595, 7040700, 030721704079

New Old Stock

Learn More

TELEMECANIQUE - XVAC361 - Stack Light Indicating Beacon Steady Blue Lens

Status: Discontinued

24353 Light Tree LMP-Blue Stack Light

Lamp Purchase Separately.

7W Max.

Enclosure: Type 12 340 V Max

Package: Plastic with 2.5" ID.

Outside: 2-11/16" wide x 2-1/3" Tall Round.

Alternates: XVE36, SCHNEIDER ELECTRIC 37942

UPC 785901243533

Compliance: ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards.

Proudly Made in USA

Learn More

TELEMECANIQUE - XVAC341 - Stack Light Indicating Beacon Steady Red Lens

Status: Discontinued

24353 Light Tree LMP-Red Stack Light

Lamp Purchase Separately.

7W Max.

Enclosure: Type 12 340 V Max

Package: Plastic with 2.5" ID.

Outside: 2-11/16" wide x 2-1/3" Tall Round.

Alternate: SCHNEIDER ELECTRIC 28047

Compliance: ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards.

Proudly Made in USA

Learn More

Lamps & Lights. 10Amp or 16Amp 250V socket.

Learn More

Military - 8-215 - Lamps & Lights. Jewel for Panel Indicators.

Red. OD of Sliding part is 0.59"and 0.27" deep.

OD of whole dark red and chrome section is 0.64" and 0.71" tall overall.

Knurled edges.

Learn More

MARCO OAK - 53-52080 - Switch, Illuminated, Avionics Press Lite.

Status: Discontinued

Panel Lamp Socket with Threaded Base.

DPDT Push On/Push Off.

Press Lite.

Includes Trim Nuts.

Connection: 6 Solder Terminals.

Fits 1/2" hole, Overall 2" tall.

Lens/Lamp (Midget Lamp) Purchase Separately.

Genuine Vintage Marco Oak - New Old Stock - Rare

Proudly Made in USA.

Learn More

Dialco/Dialight - 162-8430-09-502 - Lamp socket for T1-3/4 bulbs.

Military-style, caps not included. See attached Data Sheet for various Caps (Stovepipe, Cylindrical, Flat, Convex, & faceted) that fit this base. 

Series:162, 178 Series

Description: Sub Miniature Panel Indicator

Lamp Type: Incandescent. Midget Flange

Terminal Lamp Type: MID. Flange Base

Terminal Type: Solder

Terminal Other: Two Terminals, Fully insulated

Mounting Hole Size: 15/32" Clearance Hole

Mounting Bushing: Aluminum

Metal Finish Desc: Black Anodized Finish

Mounting Hardware Description: Steel lock washer and hex nut.

For 1.35 to 28V lamps, midget flange, front panel mounting. 

Moisture Sensitivity Level (MSL): 1 (Unlimited)

Compliance: MIL-L-3661B

Used/Removed from equipment, connection previously soldered.

Note: No Cap or bulb.

Learn More