Inductors

MICROMETALS - T157-8/90 Toroids.

The T157-8/90 Toroidal core from Micrometals is a size Toroidal core manufactured from Micrometal's unique blend 8/90 material. and can be clearly identified by the cores' Yellow/Red color.

Powdered Iron Core

AL= 42 (nH/N2) +/- 10%

Initial Permeability = 35u

Package: 40.2mm OD x 24mm ID x 14.7mm thick.

Color: yellow with red.

From: 240pc / box.

Genuine MicroMetals product

Recommended uses: Line filters, Power conversion

Additional Information: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf

MICROMETALS - T200-26B - Inductors, RF Toroids.

The T200-26B from Micrometals is a size 200 Toroid core manufactured from Micrometal's unique blend 26 material. The most popular material. It is a cost effective general purpose material that is useful in a wide variety of power conversion and line filter applications. Material reference permeability (µo) is typically 75 and can be clearly identified by the core's Yellow/White colour.

Material: 26AI (nh/T2): 160

Le (mm): 130

Ae (mm2): 231

92.0 nH/N2.

Dimensions: 2.000"/50.8mm OD, 1.250/31.8 ID, 0.550/14.0 height.

Magnetic dimensions: 13.0cm, 1.27cm2, 16.4cm3.

Color: Yellow/White.

More info: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf

Eaton Coiltronics Cooper - UP4B-150 Inductor, Ferrite Core.

Inductance: 15uH.

Current: 3.7 Amp.

Tolerance: 20%.

Package: SMD.

rom: Manufactures T/R.

Rohs compliant.

Eaton Coiltronics Cooper - UP4B-330-R Inductor, Ferrite Core.

Inductance: 33uH.

Current: 3.7 Amp.

Tolerance: 20%.

Package: SMD.

From: Manufactures T/R.

Rohs compliant.

PULSE ENGINEERING - PE-54036S - Inductors.

Status: Discontinued

Inductance: 168uH

Current: 1.81Amp

Tolerance: 20%.

Power Wirewound Toroid.

Dimensions: 21.21mm long x 11.56mm deep x 24.13mm high.

More info: http://ww2.pulseeng.com/products/datasheets/SPM2006_44.pdf

Alternate: National LM259X-L36

BOURNS - SRR0805-471K Inductor, Power.

470uH +/-10%.

Series: SRR0805.

DC resistance: 2.25 Ohm max.

DC current: 250mA.

Self-resonant freq: 3.5MHz.

Q-Factor: 34.

Package: SMD 0805 13" reel.

RoHS compliant.

Priced per piece. Minimum Order is 20 Pieces

PULSE ENGINEERING - PE-53119 - Inductor, coils.

inductance: 680uH

Current 1.3Amp.

Tolerance: 20%.

Package: KM-5.0 -

Inductor code: H470.

Dimensions: 1.3" long x 0.70" wide x 1.40" high.

Mount: PCB.

More info: http://ww2.pulseeng.com/products/datasheets/P596.pdf

FAIR-RITE - 2643540002 - Inductor, Ferrite. Cylindrical.

Impedance: 255 Ohm.

Ferrite Grade: 43.

Frequency Range: 25MHz to 300MHz.

Ferrite Mounting: Tubular.

Mounting type: SMD.

External diameter: 14.3mm.

Internal diameter: 0.25".

Outer diameter: 14.3mm.

RoHS Compliant.

2208-3299 ELMACOH Toroid, Core.

33mHy.

Dimensions: 1" OD, 0.45" ID x 0.21" Thick with (2) 1.6" Long Leads.

FAIR-RITE - 0443163951 - Filter, Ferrite.

Split Ferrite Core.

part Number Case: 0199163951

Grade: 43.

Impedance: 290 Ohm.

Frequency: 100MHz.

Dimensions: 2.67" wide x 0.32" deep x 1.272" long.

Cable Width: 2.03".

For Ribbon Cable.

Additional Info: http://www.fair-rite.com

FAIR-RITE PRODUCTS CORP -  2643804502 - 2643804502/B1 Inductors, Ferrite.

Round Cable EMI Suppression Core.

Grade: 43.

Frequency: 100MHZ.

Impedance: 100 Ohm.

Outer Diameter: 31.1mm.

Inner Diameter: 0.75".

Package: Tubular.

Mount: SMD. Rohs Compliant.

Part Number: 2643804502

New Old Stock 

FAIR-RITE - 2643801502 - Inductors, Coils.

Cable EMI suppression cores, ferrite, broadband frequencies 25-300 MHz.

Merterial 43

Dimensions: Round 25.4mm OD x 6.35mm thick with an ID of 12.7mm.

More info: www.fair-rite.com

Universal Toroidal Transformer.

Multi-tap turn toroid core.

Overall 60.3mm (2.376") D round x 22.6mm (0.892") thick with 3-1/2"

3 varnished leads each about 0.033 and 0.040 = 6 leads.

STEWARD FERRITES - 39G3449 - Inductor, Toroid Ferrite Core.

OD: 22.1mm, ID: 13.5mm x 6.3mm Thick.

Color: Grey.

Note: Steward is now Laird Technologies

STACO - 829-0088 Universal Toroid Core, Transformer. 50VA, Open Frame.

Primary is 550 turns of #29 enameled copper wire wound around a 2.8" OD 1.5" high, tape wound, iron core.

120VAC Pri windings. PriRes=23-Ohms.

Spec sheet #155 available.

Similar to GenRad's old Variac or Superior's Powerstat.

PREM - 855A03 - Inductor, coil. Tuneable, with Dial.

Mount: 3 Pin PCB.

Dimensions: Overall 7/8" x 7/8" x 1-3/16" high.

ISKRA FERITI - FP15G100 51-00 - Ferrite Rod. Perfect for Amateur and Crystal Radio.

The Iskra Feriti (Iskra Ferrites) company has more than 40 years’ experience in the production of ferrite materials and products.

Ferrite Rods, Bars, Plates and Tubes. Ferrite rods, bars, slugs, plates and tubes are primarily used as magnetic cores in radio antennas, chokes, inductors and filters. In radio antennas, ferrite rods are useful from VLF spectrum to VHF spectrum. The advantages are small size, high Q and compactness. They are used for their properties of high magnetic permeability coupled with low electrical conductivity (which helps prevent eddy currents).

Ferrite Rod Core is a cylindrical ferrite core, can be easily assembly with a spring coil or wind wire directly. It's widely used for radio antenna, LF/HF RFID antenna, choke coil, inductor, DC power filter, DC signal filter and transformer. Due to the open magnetic structure, the core can accept large DC bias before saturate. The rods are design to use for MW and shortwave antenna coils; in high frequency applications they have low loss characteristics.

Large ferrite rod made for radio "Loopsticks"

Authentic Vintage Iskra Ferite - New Old Stock

Dimensions: 10mm D x 50.8mm long. (0.394" X 1.969")

Additional Information: http://www.holmmagnetics.dk/html/kurver.html

FERROXCUBE - 3019PL00-3C8 - Ferrite, Pot Core, Uncoated.

Dimensions: 9.4mm D round x 30mm long with center hole.

Color: Gray.

Cross: 1102-00665-028.

Package of 2.

FAIR-RITE - 0443164051 - Filters, Ferrite.

Ribbon Cable Line Filters.

Split bead and housing assemblies.

Dimensions: 2.5" wide x 1.11" x 0.65" when closed.

Heavy Duty.

Laird - DM STEWARD - STE28S0670-000 - 28S0670-000 - Ferrite.

One Piece Split Core Ferrite Suppressors for Flat Cable 150ohms 100MHz 12.5mm Inside Slot

Impedance: 60 Ohms @ 25 MHz, 150 Ohms @ 100MHz, 310 Ohms @ 300 MHz

Core Material: 28  

Operating Temperature: -40 C to 125 C         

Has two rounded edges on opposite side which are 0.095" wide x 0.59" deep x 0.13" tall.

Dimensions: Inside Length: 12.5 mm, Outside Length: 17.02 mm, Outside Width: 14.99 mm, Inside Height: 0.51 mm, Outside Height: 3.4 mm  

Laird Technologies Acquires Steward, Inc. and Its Subsidiaries in 2006

Newark P/N 32AC5311

New Old Stock

Made in USA

Amidon FB73-2401 - Ferrite Beads - 9.6mm Round

• Amidon Ferrite Shielding Bead
• EMI/RFI Supression Bead, Ferrite Bead

Dimensions: 9.6mm round x 4.9mm high with a 4.8mm id. (OD 0.38, ID 0.197, HT 0.19)

Permeability 2500

AL @ 10KHz (nH/N2) 1585 (Reference Only)

Ae (cm2) 0.11

Le (cm) 2.15

Frequency  Typical Impediance

1MHz          8  Ohm

5 MHz         20 Ohm

10 MHz       20 Ohm

25 MHz        15 Ohm

https://www.amidoncorp.com

AMVECO ULVECO - AA59902-117 Transformer, toroidal isolation 1kW.

Four 117V windings: 234VCT 4.2Amps.

PRI-Dual 117V, 1040VA 50/60HZ.

SEC- Dual 117V 990VA.

Dimensions: 6.5" OD x 3".

Weight: 18# Packed.

UL & CSA Listed

Color Coded Leads

Note: Secondary AC current is 4.2 Amps per Secondary.