Hand Tools

PC Board Carbide Drill Bit #59.

Carbide micro drill bits provide excellent hardness, wear resistance, and heat resistance. They create precise holes with a smooth finish and often eliminate the need for reaming the hole after drilling.

Premium Grade Carbide #59 Decimal Size 0.041" (1.05mm).

Shank Diameter is 0.125", with an overall 1.48" long.

130° Drill Point, Fast Spiral Circuit Board Drill.

1/8" Round Shank fits CNC's and most Rotary Equipment.

Used for drilling PC boards or other abrasive materials when drilling accuracy must be maintained. 

For wide range of materials including non-ferrous alloys. 

Excellent for drilling Fiberglass, Plastics, Wood, Carbon Fiber, Phenolic, etc..

Alternate: 414D96 

New - Made in USA 

CBB Anti-Sparking tool.

For springs and typewriters in hazardous locations. 

Material: bronze. Each 0.188" D x about 6" long.

One has a sharp hook and a sharp flat point and the other tool has a fork and a rounded end.

Quite unique and handy, comes in it's own plastic pocket pouch.

T8 Torx Bits Stamped T8, 1/4" Bit

Torx is a brand name trademark for fastener heads and keys that have a six-point, star-like pattern. One of the beauties of Torx sizes is that they are universal, meaning there is not an SAE vs Metric version. They are all the same.

High resistant to wear and tear for a long tool life

Impact resistant modified chrome-vanadium-molybdenum

Tool Steel, Hardened

Imperial Point to Point: 0.90" (2.31mm)

Suitable for all applications Hardness HRC 59-61

Suitable for both manual & machine applications

Made in USA

Power Components Inc - Power Lift 5B Actuator - Rack & Pinion Double Lifter - Metric.

Power Lift Actuators convert Linear to Rotary ~~~ or Rotary to Linear motion when connected with a power source such as a motor or air cylinder.

Load applications: General Lifting and Long Runs

Maximum load capacity: 400 pounds (180 kg)

Maximum shear load: 700 pounds (317 kg)

Single and double units

1:1 Gear Ratio

Round rack units - 35 mm

Lube-free Premium Unit

Load applications: high-volume, long runs; heavy power drive units

Maximum load capacity: 600 pounds (272 kg) 

Maximum shear load: 1050 pounds (475 kg)

Note: Work Order Number Stamped W05-3319750001.

Made in USA - New

TE Connectivity AMP INC - 69710E - Premium Crimp Tool.

Anyone can make a tool to crimp terminals onto a wire. But not everyone can manufacture a tool to
crimp the terminals properly. Crimp termination of wires isn’t easy. At least, doing it right isn’t easy. We
know. We started it. TE Connectivity developed the technology of hand crimping over 70 years ago.

The 69710-1 is a C-Head Straight Action Hand Tool. The tool consists of a head with a stationary die holder and moving die holder and handles with a ratchet. This tool is a member of the CERTI--CRIMP* hand crimping tool family. The ratchet on this tool ensures full crimping of the product. Once engaged, the ratchet will not release until the handles have been fully closed. The interchangeable die sets close in a straight line to minimize contact or terminal rotation during crimping. When applicable, user-assist features such as a contact or terminal locator and a wire stops are built into the die set.

Straight Action "C" Head.

Ratcheting. Mod D for Termashield Ferrules.

Xcelite Cooper Tools - 990063 - KT-WIR990063 - Wire Wrap Tools.

Status: Discontinued

Wire Type OFHC

Wire Size 30 AWG

3.25"x.50" Cut Strip

Min/Max Terminal Diagonal 0.030/0.034"

Terminal Hole Depth 1".

Also Apex Tool Group 990063

MIDDEX ELECTRONIC - WKR 22 - WKR-22-120 - TOOL SENSOR

For Systems WK1T, WK4T, WTK Scanning

Range:120 Sensor

Connections: 4 Pin

Absolutely leak proof in the most demanding environment

Fast and constant scanning speed

Sensor diameter only 22mm

Scanning direction right or left

Object, tool, and free space scanning

PNP outputs, wear resistant, short protected

NPN outputs, wear resistant, short protected

Inverting of outputs via DIP switch

Output latching until new scanning cycle

WKR22-120 = WKR-S120 9023

New 

Philips ECG - PR31 Logic pulser probe, compatible with most logic families.

The PR-31 Pulse Generator is used to inject a signal into a logic circuit without having to remove the IC or open the circuit. Using the companion PR-21 Logic Probe you can detect component failures or wiring errors. The average power of the injected signal is limited by supply voltage (Vcc) of the circuit under test, and with its short duration pulses, will not damage circuit components. 

The PR-31 Logic Pulsar produces a 10µs signal at a 100 mA load and can be switched to either 0.5Hz or 400Hz. It is also capable of generating a square wave equal to approximately 90% of the supply voltage (Vcc) at the square wave output terminal so that an oscilloscope can be used to observe and trace signals. The PR-31 Logic Pulsar also has an external sync input, which enables the user to synchronize the pulse output with an external signal, such as a computer clock circuit.

Specifications - Logic Probe

• Frequency Response: 50MHz
• Detectable Pulse Width: 10ns
• Logic Threshold: TTL Hi 3V, Lo 0.75V
• Input Impedance: CMOS Hi 60% Vcc, Lo 15% Vcc
• Operating Supply Voltage: 4-18V
• Max. Input Protection: ±70VAC/DC @ 15s
• Power Supply Protection: ±20V

Specifications - Logic Pulser

•  Pulse Repition Rate: 0.5/400Hz
• Pulse Width: 10µs
• Output Current:
  • Pulser Mode @ 0.5Hz 100mA sink.source
  • Square Wave Mode @ 500Hz 5mA sink/source
• Sync Input Impedance 1MΩ
• Operating Supply Voltage 5-15V
• Max. Sync Input Protection ±120Vdc @ 30s
• Output Protection ±35VDC @ 30s
• Power Supply Protection ±20VDC @ 30s

For use with logic probe or osciloscope.

GC Electronics Ungar - 6100-1 Imperial Soldering Iron Equipment. Perma-Cool Handle, 120 AC/DC.

Status: Discontinued

Designed for use with all Imperial Heat Cartridges and Imperial 2 or 3 wire cords.

For #6102 2 wire cord set or #6103 3 wire cord set.

Heat Resistant Plastic Resin

Cartridges #6200 45W, 6201 35W, 6202 25W, 6203 55W.

Color: Turquiose.

New Old Stock