Exotic

NEW PDIP-28 Programmable Encoder / Decoder CMOS Manchester Phase Encoding - FullSpex in 1996 Databook Learn More

Unidentified MFG - 9-112 Back At-ya Mirror - First Surface Mirror.

A first-surface mirror or front-surface mirror (also commonly abbreviated FS mirror or FSM) is a mirror with the reflective surface being above a backing, as opposed to the conventional, second-surface mirror with the reflective surface behind a transparent substrate such as glass or acrylic. Afirst surface mirror typically reflects 94 to 99%.

3-Sided for Lasers.

Reflects laser light back at emitter.

3 Mirrors Mounted on a Funnel Shaped Mount.

Dimensions: 73mm wide x 56mm tall.

Three threaded mounting holes on bottom, 2" centers.

Minor scratches on mirrors from storage in paper.

Applications: First Surface mirrors are primarily used for projecting clear sharp images in applications such as: Flight Simulation, Reflecting Telescopes, Kaleidoscopes, Periscopes, Laser, and Medical imaging.

Learn More

DC-AC Chopper New - Vibrator 6-PIN plug-in Shielded 3" tall can x 2"-OD wiring diagram on side of unit 1/Manuf bx.USA Learn More

Laird Thermal System - MARLOW INDUSTRIES - CP2-31-10-L-1.

Ceramic Plate Series Thermoelectric Cooler - The CP2-127-10-L1 is a high-performance and highly reliable standard Thermoelectric Cooler. Assembled with Bismuth Telluride semiconductor material and thermally conductive Aluminum Oxide ceramics. 

Thermal electric cooler. Peltier junction's 3Amp 2.5V.

Dimensions: Approximately - 30mm sq x 5.3mm tall, (29.7mm x 29.7mm x 4.7mm).

MFG Part Number 40655-202.

New Old Stock. 

• Thermoelectric Coolers for Reagent Storage
• Thermoelectric Coolers for Handheld Cosmetic Lasers
• Cooling for Centrifuges
• Heads-Up Displays, Imaging Sensors
• Peltier Cooling for Machine Vision

Learn More

Airpot 62820-2 Dashpot. Adjustable air dashpot. Glass 0.74" OD with 2" long shaft with swivel attachment at both ends. Threaded panel mount with nut and threaded with nut at other end.

Airpot’s pneumatic damping products are specifically designed to provide unparalleled damping and energy dissipation accuracy by eliminating friction from their working elements. The materials used have built-in lubricity, high strength-to-weight ratio, excellent stability under temperature/humidity extremes, close coefficients of thermal expansion, and non-deteriorating performance due to age or non-use. The basic parts are a graphitized carbon piston, precision ground to millionths of an inch TIR inside an annealed, borosilicate glass cylinder with a precision fire-polished bore.

 

Learn More

Electronic Clinometer AccuStar. Total range +/-60deg. Linear range +/-45degrees. Threshold & resolution: 0.001degree, time constant 0.3 second. Freq response: 0.5Hz voltage supply 12VDC nom, +8-to-+20 at 5mA. Scale factor: to linear range: 60mV/degree nominal. Dimensions: 2" D, 2 mounting hole & slot 2.2" apart x 1"tall, 5-wire. Learn More

18x36mm white receptacle, 74mm long red/orange plunger. 79-T96, WHITE-RED LASER w/ LOGO & BARCODE 186-216 02233001-02233200 One Box of 200: 02233001-02233200 weigh 23.2-pounds Learn More

COLECO - 8-940 Music Box Movements

Believe tune is "Merry Widow Waltz"

Manual wind-up.

Made in Japan

Vintage - New Old Stock 

Learn More

PT-388 - 5000-3-240  Surprise Printed Circuit Board, w/ LM555CN, LMC60

Contains two 555 Timers ICs, One LMC60 and more.

New Old Stock PWB

Learn More

General Electric - NE-20 - Stock # 2Z 5893-1 - Neon Glow Lamps & Lights.

Voltage: 105-120VAC

Output: 1/25 watt.

NE-20.

Base: T2 Bayonet, Twist and Turn Installation.

Vintage Genuine General Electric - WWII - New Old Stock

Made in USA

 

Learn More

Ceramic IC Form, overlaid with gold, 68-SMD. Dimensions: 52mm square x 2.7mm thick. Application: An ideal product for the artisan. Learn More

Wobblers. Plastic innards for toys. Throws weight off balance creating a "wobbling" effect . Learn More

Reflector. 2.87" x 2.93" x 0.65"OD. Clear plastic to diffuse light or reflect incoming visible and infrared. ID: 2.7" x 2.8". Learn More

GYROSCOPE - VERTICAL DISPLACEMENT MK 60 MOD O -5.5" x 4"round, square mounting flange - Torpedo Black Learn More

Carrier Demodulator. Package: 7 gold leads. Dimensions: 1-13/16" square x 1/2' tall. RFE/Removed from equipment. Learn More

IC. Unknown specifications. Package: 68 PLCC. Note: Used/Removed from equipment. Learn More

HEP-716 (Motorola) similar to generic 2N5356

Learn More

26 NICHROME Wire, nichrome. 26-1C (26AWG 1 Conductor).

Solid. 3 Ohms per foot.

This resistance wire is used for foam cutting heating elements and other heat related uses.

Note: Price per foot.

Learn More

Unknown function. Package: TO-92 (antique). Learn More

IC. Unknown function. Case: 100 SMD (30 x 20 x 30 x 20). Note: Double marked M91H047, MCH5042701VI. From: 28/Manuf tray. New. Package of one tray of 28 Pcs. Learn More

IC, blank. Ceramic and gold for a 16 Pin Flatpack IC. New. Uncut carrier. Perfect for microscopy use or building nanocircuit. 3H16C-2E. Would also be perfect for jewelry 0.96" long x 0.43".

Learn More

CENTURY - Art PC Board One Circuit board, blank.

Predrilled.

Dimensions: 2.75" x 1.5" x 0.063" thick.

Package of 50.

Learn More

20 NICHROME Wire, nichrome. 20-1C (20AWG 1 Conductor).

Solid, 0.6mm diameter. 1.5 Ohms per foot.

This resistance wire is used for foam cutting heating elements and other heat related uses.

Note: Price per foot.

Learn More

Pocket protectors, 6-1/2" vinyl, white. Clear front 3" wide. Old but still strong - useful for any thin object needing display and storage.

Learn More