AC Motors - Single Phase

Genuine Hansen Synchron - A12RC-6 Motor, AC. 

Synchron 600 Series, Shallow Pear Shaped Gearbox timing motors are the industry leader. The Hansen Synchron motor distinguishes itself with low noise levels and a robust, precision gear train. The motor is permanently lubricated and requires no maintenance during its lifetime. Gear material has been selected for the quiet operation and long life required in time measurement instrumentation and event recording applications.

Status: Discontinued

Permanently Lubricated requiring no maintenance.

Synchronous 110V 60Hz 3 watt 300RPM.

Starting torque: 20 in-oz

Teardrop shaped with D-Shaped Shaft and 2 Tab mounting

Dimensions: 1.970 Diameter long x 1.875" wide x 1.375" max high.

Shaft: 0.128" (3.175mm) D x 9.1mm long.

Looking at the shaft it turns Clockwise

New Old Stock

Made in the USA.

Learn More

REGAL CCL Motor- DE-25L-0001 - KP63MT014 Motors, AC/DC.

Universal 120V, High Speed (11,000 RPM).

Brush Type Motor

Motor Diameter 1.41" (35.8mm)

Overall Assembly Length 3.70" ((94mm)

Motor Body Length minus shaft 2.788" (70.8mm)

Face Mount 2 Tapped Holes approximately 0.97" Apart 

Removeable Spiral Worm Gear

Works at 12V+ Approximately 150RPM after Gear Reduction 

Spiral Gear Assembly has two Cams 

The Front Bushing support supports and centers the Shaft.

Note: Pull Cam Pin, remove Bridge Rectifier and use as DC Motor 15 VDC 150RPM 

Regal P/N KP63MT014

12V 200mA AC with Bridge Rectifier (SB603) or DC Reversible.

 

Learn More

A.W. HAYDON - E81302 / K81336-P4-S3  Synchronous Motor, AC Timing.

A synchronous electric motor is an AC Gear Timing Motor in which, at steady state, the rotation of the shaft is synchronized with the frequency of the supply current; the rotation period is exactly equal to an integral number of AC cycles

Supply: 115VAC 60Hz 1.5 watt.

Speed: 6 RPM.

Frame Size: Pear Shape Permanent Magnet.

Mechanical Mounting: 2-Hole Mount 1.88" Spacing.

Weight: 4.2 oz.

Note: Reversible

Shaft: 1/8" D x 3/4" long (with 1/16" hole @ midpoint).

Dimensions: 2.52" x 2.14" x 1.13"

0.1uF Capacitor required and included.

Hookup Instructions: 0.1uF 250V capacitor between Red & Green, Connect two Whites Together - 115VAC on Red & White and watch it turn, slowly and reversible. 

Applications: Teardrop-shaped and made for timing displays, sign animation and experimental purposes.

New Old Stock

Proudly Made in USA.

Learn More

Eastern Air Devices - H34BBM-8.

Supply: 115V. N/P

Current: 1.45A 60Hz.

Speed: 1800 RPM.

Torque: 28-Oz-In.

Thermally Protector

Continuous Duty  

Direction: Hysteresis synchronous reversible.

HP: 1/25.

Wire count: 3 14-Inch teflon leads.

Mech. Mtg.: 4 10/24 threaded holes 2.625"spacing.

Body Dimensions: 3.36"D x 5.1"L.

Start/Run Capacitor 4uF required, not included.

Weight: 5 lbs  6 Ounce unpacked.

Note: 4uF 660VAC capacitor required for start and run between Black and Blue wires.

Alternate: Ashland Electric A66QBU-4, NSN 6105-01-082-2923

UL Approved

Factory New

Note: Detailed Specification Sheet is Attached.

Learn More

BREVEL PRODUCTS - 311282 - 24V AC Motor - 3 RPM, 60Hz, High Torque.

Brevel Motor - Model R. With 0.32" / 8mm Slotted shaft.

Ideal Display Rotation Speed of 3 Revolutions every minute.

Dimensions: 2.9" x 3.2" x 3" behind panel, mounts with four threaded holes 2.4'" apart.

Weight 2 pounds each.

New Old Stock

Learn More

BODINE ELECTRIC - NSY-13 Motor. 

AC. Supply: 230VAC Single Phase, 50Hz 0.5Amp.

HP: 1/50. Thermlly Protected

Speed: 1500 RPM.

Insulation: A1

Direction: Counter Clockwise. Continous Duty.

Dimensions: Overall 5-1/2" long (including shaft) x 3-1/4" wide x 3-1/3" high.

Shaft is 1/4" (0.254") D x 5/8" 90.616") long.

Alt #: G0123043 

Perminently Lubricated Ball Bearings

Packed Weight 5 lbs.

Note : This motor does not come with mounting hardware/screws. 

There are 4 mounting holes on the motors bottom surface: centers are approximately 1-1/4" (length) and 1-5/8" (width) centers. Holes are approximately 0.4" deep and have 10-32 threads. 

New Old Stock - Made in USA

Learn More

TRW/GLOBE - CMC144A152 Motor, AC. 1PH 38-46VAC 60Hz, 3600RPM.

Hysteresis Synchronous with Capacitor, 12uF included.

3 wire leads, teflon, 14" long.

Dimensions: 30mm D x 74mm long, including shaft.

With 7.5mm D gear.

Mounts on 2 threaded holes 21.7mm centers.

Note: Western Electric P/N: P-21F345.

Made in the USA.

New Old Stock.

Learn More

JAPAN SERVO - 127PS1176 U129A-119 - 060485 - Motor, AC.

Input Power: 115VAC 0.7Amp

Speed: 20 RPM.

Capacitor 8uF required, included.

Duty Cycle =2.5 Sec. ON/60S OFF

Type U129A-119.

5 Watts out has thermal cutout which will cutout motor if ran for 1-1-1/2 min.

MFG P/N 060485.

New Old Stock

Learn More

JAPAN SERVO - KS7P8-11 - P/N 6813649 Motor, AC geared.

Synchronous 25V 50/60Hz

Speed: 250/300RPM.

Requires 20uF capacitor (included).

On a 2.78" Square Plate with 4 mounting holes 2.2" apart.

Shaft: 1/4"shaft x 0.6" long and has a gear 0.49" D.

Motor is 1.6" behind plate.

Maybe replaced with p/n 6813649.

Very Old Stock

Made in Japan

Learn More

HAYDON - 36890-60 - 120VAC 60RPM MOTOR for Chart Recorders

1/8"-Shaft 2" X 1.25" X 1.75" GOULD / BRUSH PLASTIC GEARS IN METAL HOUSING

Learn More

AUTOTROL CORP. - PX-300 Motor, timing geared.

Supply: 115V 60Hz 4W.

Speed: Approx 2-RPM counter clockwise, looking at shaft.

Mech: Standard pear shaped gear housing (slightly dirty).

Size: 2.526" x 2.144" Mounting: Holes 1.875" centers.

Shaft: 0.177"D keyed.

Lubrication: Permamently Lubricated

Used/Removed From Equipment

UL, CSA & VDE Recognized

Old Stock - Cases may be a little rusty.

(Price reduced due to corrossion that is not affecting operation)

Made in USA

Learn More

Motor, 115VAC, Open C-Frame Fan motor.

Shaded Pole direct drive fan motor.

Sleeve Bearings.

Continuous duty.

Mounting: 2 studs 

Shaft Diameter 3/16" (.1875")

Shaft Length 1.45" D Shape

Laminations 2.4" Square

3 Wire, 2 Speed.

Note: C-Frame motors are mechanically reversible by removing the 2 screws holding the bearing housings together
and reversing the rotor/shaft assembly. Studs can also be reversed to the other side.

Learn More

Hansen Synchron - 32953R-24 Motor, AC.

Synchronous motors are inherently constant-speed motors and they operate in absolute synchronism with line frequency. Hansen offers both Hysteresis and Permanent Magnet synchronous motors (PM Synchronous Motors) to meet your exact needs. The hysteresis design, Hansen's famous Genuine Synchron®, is extremely quiet and smooth in operation and has very low cogging torque, ideal for back-driving. Because it is light in torque, it is always attached to a Hansen ultra precision gearbox. The permanent magnet motor design offers higher torque and is available with or without a gearbox. The high strength magnets create substantial cogging torque, making these synchronous motors ideal for applications where you need to hold position after removing power.

AC geared motors integrate a gear reducer with an electric AC motor to deliver high torque at low speed.

Synchronous 120VAC 1/10 RPM.

Mount: Panel, 2 Hole Mount at 1-15/16".

Shaft: 0.19" Diameter, 0.535" Long.

Dimensions: Overall, Oval 2-5/16" long x 1-7/8" wide x 1-9/16" high plus operating mechanism 5/8" long.

Excellent Like New Condition but Used /As removed.

Alternate: 1279674

Proudly Made in USA

Learn More

SUPERIOR ELECTRIC CO. - SS50-1292U - Motors, AC Geared.

Xerox 127P1365

Voltage/ Current Input: 20V/60/0.5Amp.

Sppeed: 6RPM.

Requires capacitor for start or run.

Heavy Duty, 3 wire.

Motor is 3.35" DIameter

Impedance Protected

Assembly is 5" tall x 7-1/2" long x 5-1/2" wide with 4 mounting slots.

Output is 1.15"[30mm] D on a 3/8" Flatted Shaft.

Note: Reversible Slo-Syn.

Requires a 250 Ohm 25 watt resistor and an 8uF 230VAC capacitor.

Used / Removed from Equipment

Made in USA

Learn More

Induction Motor, NEW in box - 1450-RPM 115/60 also operated on 100V. 61mm square x 67mmD. 4-wire leads. with starting capacitor, new in box.5.6mmD shaft threaded. 2 lbs. Learn More

4-pole Induction motor new in box with capacitor - 42mm-Sq 1/750HP 1W 600RPM 115/60/0.080A Pinion shaft for gearhead [not included] Induction motors are optimal for uni-directional continuous operation such as a conveyor system. Permissable load inertia: 0.792 oz-in2 Learn More

MURTEN SAIA - UDR11UJ1RHZ40 - Motor, AC With Capcitor SKU 149477.

Saia-Burgess Controls AG, including the "Saia PCD®" brand, was acquired by Honeywell in 2013.

Timing Motor, Reversible.

120VAC 60Hz 2.5 watt, 400-500 RPM.

Dual Sshaft, 4 wire.

Motor Dimensions: 1.878" D x 0.970" wide.

Shafts(s): 0.125" long x 0.657" long (seated), and the other is 0.165" D x 1.5" long.

Note: Can also be used as a Generator.

Made in Switzerland

Note: Capacitor 0.33uF 400V included.

Learn More

Hurst - SP137 - Motor, Synchronous Gear Timing, High Torque

Hurst’s core business focused on instrument grade timing motors and assemblies, stepper motors and controls. Today the business has grown into manufacturing low-cost, high-performance brushless DC motors for many markets, including medical, printing and computer applications. 

Supply: 115VAC 60Hz.

N/P Current: 5W.

Speed: 1/15 RPM.

Torque: Hurst MSM Series.

Direction: CCW. (As viewed looking at the shaft)

Shaft Diameter: 0.185" (4.8mm) , Length 1.0: (26.6mm)

Wire count: 2 Wire Leads.

Mech. Mtg: 3 Holes 2.35" Spacing.

Body Dimensions: 2.4" (60mm) Diameter x 2" (51mm) Length.

HP: 0.188"D.

Applications: Displays

Made in USA - New Old Stock

Learn More

HURST - 3002-030 - MODEL A - 115V 50Hz 20 RPM

Torque: 2.3 Oz-In

REVERSIBLE PM SYNCHRONOUS INSTRUMENT GRADE MOTOR 115VAC 50 Hz. 2.5W

Requires 0.25uF capacitor (and SPDT Switch) between Red and Black, 115/50Hz to Red and Blue CW, Black & Blue CCW.

Drop-in replacement for pear-shaped gear cup motors.

Die Cast Gear Housing.

Learn More

General Instruments - GI-29005-13 Motor, AC.

This AC motor replacement is ideal for someone who requires a powerful source of energy for an extended period of time. The shaded-pole motor is the original type of AC single-phase induction motor, dating back to at least as early as 1890. A shaded-pole motor is a small squirrel-cage motor in which the auxiliary winding is composed of a copper ring or bar surrounding a portion of each pole. The construction of the motor is very simple because it does not contain any commutator, brushes, collector rings, etc. or any other part. The shaded pole induction motor does not have any centrifugal switch. Thus, the chances of failure of the motor are low.

Shaded Pole Motor

Supply: 115V 60Hz 0.5A.

RPM: 3375

Wire Count: 2 with Quick Connect.

Turns CW looking at the shaft.

Mechanical Mounting: 2 holes 1.9" Spacing.

Body Dimensions: "Pancake." 2.5" x 3" mounted on versatile and removeable triangular mounting plate.

Approximate Overall Dimension Including bracket: 4.6" L X 3.8" W X 3.0" D

Shaft: 0.18" Diameter x 1.2" Length.

Wire Lead Length: 20"

Enclosure: Motor Enclosure Design Open Air-Over

Great fan for cooling or other continuous duty operation.

Motor Mounting Position All Angles.

New Old Stock 

Learn More

Motor, timing. Supply: 24VAC 50Hz. N/P Current: 2.7W. Speed: 1/2-Rev / Hour at 50Hz. Wire count: 12" teflon wire leads. Mech. Mtg.: Two mounting tabs 2.17"spacing. Body Dimensions: 47mmD x 33.7mmH. Shaft Dimensions: 0.25"D flatted shaft 0.5"L. Weight: 6 oz. Note: TYPE 117 Runs 20% Faster on 24V 60Hz. Learn More

Motor, AC. 1PH 115VAC 60Hz 1200RPM, 11 watt 1.8-OZ-IN. Continuous duty. Capacitor 1.2uF required not included. Note: Please see our capacitor 494-00048, SKU 146856 sold separately. Shaft: One side flattened. Overall diameter would be 0.191" (4.8mm) D x 0.659" (16.7mm) long.

Learn More

UNIVERSAL ELECTRIC CO. - AF1G022K# Motor, AC. 3.3" Diameter

Universal Electric motors is a leader in supplying a full line of quality motors and blowers as well as automation control products for residential, commercial and industrial applications. They offer a wide range of standard catalog products and hard to find HVAC/R 'OEM' replacement motors and blowers. 

Permanent Split Capacitor Motor

230VAC 0.67Amp 60 Hz, 3000 RPM.

Horsepower: 1/12 HP

Mount: 2 Studs on 2.85" centers.

Start Capacitor 3uF (3MFD) Included & attached to motor.

No Oiling required, Thermal Protection.

Protection: Automatic

Enclosure: Open Air Over

Features:  Connection Box, Thru Bolts

Dimensions: 3.3" Diameter plus control box and capacitor x 4-5/8" long plus shaft.

Overall 4-3/4" wide.

Shaft: 3/8" D x 1-5/16" long.

New Old Stock

Applications: Industrial, HVAC/R, Evaporators, Blowers & Ventilation.

Learn More

1/4-1/3-1/2HP 230VAC THREE SPEED MOTOR 1050RPM sleeve bearing double shaft Learn More