AC Motors - All

General Instruments - GI-29005-13 Motor, AC.

This AC motor replacement is ideal for someone who requires a powerful source of energy for an extended period of time. The shaded-pole motor is the original type of AC single-phase induction motor, dating back to at least as early as 1890. A shaded-pole motor is a small squirrel-cage motor in which the auxiliary winding is composed of a copper ring or bar surrounding a portion of each pole. The construction of the motor is very simple because it does not contain any commutator, brushes, collector rings, etc. or any other part. The shaded pole induction motor does not have any centrifugal switch. Thus, the chances of failure of the motor are low.

Shaded Pole Motor

Supply: 115V 60Hz 0.5A.

RPM: 3375

Wire Count: 2 with Quick Connect.

Turns CW looking at the shaft.

Mechanical Mounting: 2 holes 1.9" Spacing.

Body Dimensions: "Pancake." 2.5" x 3" mounted on versatile and removeable triangular mounting plate.

Approximate Overall Dimension Including bracket: 4.6" L X 3.8" W X 3.0" D

Shaft: 0.18" Diameter x 1.2" Length.

Wire Lead Length: 20"

Enclosure: Motor Enclosure Design Open Air-Over

Great fan for cooling or other continuous duty operation.

Motor Mounting Position All Angles.

New Old Stock 

Learn More

Motor, timing. Supply: 24VAC 50Hz. N/P Current: 2.7W. Speed: 1/2-Rev / Hour at 50Hz. Wire count: 12" teflon wire leads. Mech. Mtg.: Two mounting tabs 2.17"spacing. Body Dimensions: 47mmD x 33.7mmH. Shaft Dimensions: 0.25"D flatted shaft 0.5"L. Weight: 6 oz. Note: TYPE 117 Runs 20% Faster on 24V 60Hz. Learn More

Motor, AC. 1PH 115VAC 60Hz 1200RPM, 11 watt 1.8-OZ-IN. Continuous duty. Capacitor 1.2uF required not included. Note: Please see our capacitor 494-00048, SKU 146856 sold separately. Shaft: One side flattened. Overall diameter would be 0.191" (4.8mm) D x 0.659" (16.7mm) long.

Learn More

Trane GE - D340316P13 - Programmable Variable Speed Furnace Blower Motor, GE ECM Module.

Power: 1/2 HP

Voltage: 115VAC, 60Hz

Current: 8.0 Amps

Rotation: CCW

Designed for Trane/American Standard Furnaces 

Genuine GE

Replaces MOT5432S

Approximate Dimensions: 5.50" Diameter X 3.10" Deep

New Old Stock

Learn More

Motor AC, Supply: 230/460V 3-Phase 60Hz. Current: 3.6/1.8A. Speed: 1725 RPM. HP: 3/4 Frame Size: 56C. Continuous duty. Code:N SF:1.0 Permanently lubricated ball bearings. Learn More

Resistor Kit for SLO-SYN synchronous motors. 150-ohm tubular wirewound 5% with mounting brackets. Ohmite DR103788-013. Learn More

UNIVERSAL ELECTRIC CO. - AF1G022K# Motor, AC. 3.3" Diameter

Universal Electric motors is a leader in supplying a full line of quality motors and blowers as well as automation control products for residential, commercial and industrial applications. They offer a wide range of standard catalog products and hard to find HVAC/R 'OEM' replacement motors and blowers. 

Permanent Split Capacitor Motor

230VAC 0.67Amp 60 Hz, 3000 RPM.

Horsepower: 1/12 HP

Mount: 2 Studs on 2.85" centers.

Start Capacitor 3uF (3MFD) Included & attached to motor.

No Oiling required, Thermal Protection.

Protection: Automatic

Enclosure: Open Air Over

Features:  Connection Box, Thru Bolts

Dimensions: 3.3" Diameter plus control box and capacitor x 4-5/8" long plus shaft.

Overall 4-3/4" wide.

Shaft: 3/8" D x 1-5/16" long.

New Old Stock

Applications: Industrial, HVAC/R, Evaporators, Blowers & Ventilation.

Learn More

1/4-1/3-1/2HP 230VAC THREE SPEED MOTOR 1050RPM sleeve bearing double shaft Learn More

Motor, AC. Reversible. Induction motor 115VAC 0.22Amp, 1800 RPM 50/60Hz. CW. 4 Wire. Dimensions: 3.27" D x 3.375" high. Plus - Shaft: 0.235" D x 1-1/16" long. Capacitor required: 2uF, not included. The rotational direction is based on the connections of the two windings and a 2 microfarad AC-rated phase-shift capacitor. The two windings are color-coded with black and green wires. The run winding leads are black. The phase-shift winding leads are green. There are no polarity markings on the leads. Rotational direction is trial-and-error. We have no manufacturer�s data on the motor beyond the nameplate. The following procedure works. To get the motor to run: Connect one black and one green lead to one side of an AC line cord. Connect the other green lead to one side of a 2 microfarad AC-rated capacitor. Connect the other black lead to the other side of the capacitor and the other side of the AC line cord. Plug in the AC line cord and note the rotational direction. If it is the way you want it you have the proper connections. If the rotational direction is not what you want, switch the two green leads, without changing any of the other connections. The motor will now rotate in the opposite direction. Learn More

Slo-Syn Inertial Flywheel. Dimensions: 3.99" D x 1.78" deep. For 0.35" shaft. Weight: 3.918 lbs. Learn More

SERVO - 77454 1063-1 Motors, AC.

Input Power: 115/200VAC 60HZ

Spped: 1300RPM

Power: 12 watt.

Torque: 1.1 Oz In.

Splined shaft.

Capacitor 0.8uF required, not included.

Learn More

Three Speed Shaded Pole Motor 115V 7.0-4.4-3.6Amps Rotation:CCWLE 1/2"shaft 4.75"Long Learn More

200-230/460V 5.5/2.7FLAmps 3-Phase 60Hz 1140-RPM SF:1.0 OR 190/380V 4.8/2.4A 50Hz 950-RPM CODE:J Encl:OPEN CONT DUTY - Auto Thermally Protected - Ball Bearing - Keyed & Flatted 5/8" Shaft 5" Long.NEMA-56Y Learn More

Motor, AC. 3 Speed 1/8, 1/12, 1/4HP 277VAC, 1075RPM. Sleeve bearing. Double shaft: 9” x ½” x 9”. Capacitor required 5uF (MFD) 370VAC, not included. Learn More

Century AC Condenser Fan Motor - PolyPhase 3/4-HP 200-230/460V 60/50Hz 3.4-3.1/1.55Amps Frame:T56Y type:SC Flatted & Keyed 6" long Shaft 0.69"OD SF:1.00 Continuous Duty - Shaft Up AOM: 50Hz 950-RPM Approx 6.5"OD x 8.5"LongNEMA-T56Y Learn More

1/2HP 1075-RPM 460V 60Hz 1-Phase 1.6Amp Ball-Bearing 1/2" Shaft flatted twice x 6" Long. 10uF 370VAC Cap required (supplied) A.O.Smith: FEH1056S MagneTek: HF3L7089N Universal Electric - Thermally Protected. Learn More

1/2-HP Continuous Duty - Class A Insulation, Split Phase - sleeve bearing , resilient mounting, Open dripproof, Auto Reset for Overload, Rev Rotation, Frame:48, special shaft 0.5" under 0.62" collett. 440 1140 409 Nice Learn More

EATON CUTLER HAMMER - NFXF25A0-1 Motor Drive/Control.

Input: 100-120VAC 1 phase 6 Amp.

OUT: 0-240VAC 3 phase 1.6A 0.25HP.

Frequency range: 0.1-400Hz out.

UL/CSA

Used / Removed From Equipment

Learn More

1/2HP 230/460 3-Ph 3630RPM "Wash Down" enclosed TENV FR56C 60Cambient Energy-Efficient - Wash Down / ISR cut leads - 0.644" keyed shaft 2" long continuous duty Learn More

Motors, AC. Supply: 1/2HP TE 208-230/460V 2.1-2.0/1.0A 1725RPM 60Hz 3-Phase CLASS-B CODE-L 74%Efficiency P.F.63%. 40-degC Ambient-Continuous. 0.625"D keyed shaft 1.85"L. Motor: 5.8"OD x 11.25"L. Weighs 20-pounds. Mounting:Four 0.315" threaded holes 4.16"spacing. Learn More

BALDOR - 35B11-372 - 1.5 HP Motor, AC.

Supply Voltage: 208-220/440V 60 Cycle

3-Phase, Class A.

N/P Current: 5.0-4.6A/2.4A.

Speed: 1725 RPM.

Frame Size: 56,  520M.

Catalog: 143154 

Temperature: 40 C Ambient

Excellent Condition - Made in USA

CSA

Learn More

1HP 460/200-230V 2.4/4.8A 1Ph 60Hz Vertical Frame56 Permanent Split Capacitor, Condenser Fan motor. Reversible - 25uF 370VAC cap - 5/8" flatted & keyed Shaft 6"long, Auto-protected - Class B moisture resistant Insul, Double sealed ball bearing, positioning lugs for belly-band mountingNEMA-M56Y OAO SF:1.0 35-Pounds Learn More

Gear speed ratio reducer. Ratio: 30:1. In: 1800. Ser Fac:1. In: 3.26HP. Output torque 1864. Lube: AGMA 8. 51-110F. Frame 56C.

Output Shaft - Goes threw on both sides 9.5" deep. Inner diameter: 1.425" Outer diameter: 2.875"

Learn More

Motors, AC. Supply: 208-230/460VAC 3 Phase 1HP 1730RPM. Mounting B3R(D) steel body. Learn More