Drives

Tridelta Industries, Inc. - M292-010A001-00B - Switched Reluctance Driver

Driver board for M132-013A001-16B SWITCHED RELUCTANCE motor - MOTORS SOLD OUT

Made by Tri-Delta, now a part of Honeywell.

Smaller Version Available P/N 705B0364 = Reference SKU: 149395

Tridelta Industries, INC. - 705B0364 REV A

SWITCHED RELUCTANCE motor DRIVER BOARD made by Tri-Delta, now a part of Honeywell.

PARAMETRICS ZeroMax - 240721 - PARATROL S 3/4HP DC Motor Speed Control

PARATROL S

3/4HP 115/1/50/60Hz

Adjustable speed drive provides a 60:1 speed range from a base speed of 1800-RPM either permanent magnet or shunt wound.

Installation Specifications Included.

About 8.5 x 11 x 4"

14-gauge steel blue oil/dust-tight enclosure, two conduit holes in bottom.

Approximately: 10 lbs.

Made in USA

New

Comptrol - 59-1231 - Axis Position Brushless Motor Controller. 

Terminal Blocks: P1-P2: 24V I/O.

Connectors:

P3: Auxiliary Encoder.

P4: Feedback Encoder.

P5: Serial.

P6: Servo.

115V/60Hz. 11 lbs.

New - Comptrol - Proudly Made in USA.

CUTLER-HAMMER - SV9F10AC-2M0B00 - 1HP 0-500Hz Motor Controller - Less Key Pad/Control Panel.

Output: 3-Phase-0-to-Input Voltage 0-500Hz

I2:4.7/5.6A

HP: 1.0CT/1.5VT

Input: 3 - 208-240V 50/60Hz

3-Phase 4.7/5.6A 

Nema 1 (IP20)

Missing the KeyPad/Control Panel.

CE

Made in Finland

Note: Used

Johnson Electric - 2706 - DC Motor controller PCB with Three 10 Farad Super-Capacitors & Three Switches.

Johnson Electric is the industry benchmark for micro motor driven actuation. PCB provides steady current source for small motors have uneven loading characteristics. 

PCB Measures 1.280" X 1.630" 

Power Input: 7.2 VDC on Two Gold PCB Terminal Studs

Power Output: Two 1/8" (0.125") Quick Connect Connectors

PCB is a Super-Capacitive Drive Assembly.

7.2VDC input power paralleled with 3 series connected Super-Caps (10F @ 2.5VDC each) to total 3.3 F of capacitance @ 7.5VDC).

Each of the three Super Capacitors manufactured by Maxwell (PC10-270 Series) is rated 10 Farad 2.5VDC. Supercapacitors are used for energy storage undergoing frequent charge and discharge cycles at high current and short duration or applications that require pulse power.

There are also three switches: One SPDT (On/Off Toggle) and Two SPST KW12-2 Microswitches rated 3A@250 VAC & 5A@125VAC.

High brightness LED illuminates when energized.

Note: With the PCB charged to 7VDC, the LED will remain brightly illuminated for greater than 10 minutes.

Motor Assembly removed from "New" from Never Used Battery operated commercial Cutting Tool. 

Applications: Student & Science Projects. Great for disassembly and use of Capacitors, Switches and Super Bright LED.

Note: See SKU 156919 for purchase of the Superior PCB Assembly with Motor.  

HITACHI - HA13406W - IC - Three-Phase Brushless Motor Driver.

Output Current: 3 Amp @ 12V Per Phase

Low Output Saturation Voltage

Over temperature Protection

Low Thermal Resistance Package

Includes Hall Effect Sensor Amps, Logic, Output Amps and Control Amps.

Can be used with many motors using hall effect sensors for speed control.

Case: SP-23TA

Power SIP Right Angle Leads.

Genuine Vintage Hitachi - New Old Stock

Made in Japan

Bison Gear & Engineering - 170-205-0016 - Pulse Width Modulation  (PWM) DC to DC Controller, 10-32V.

Bison's DC in/DC out PWM chassis drives include inhibit for remote starting and stopping, a power LED, and trimmer pot adjustments for minimum speed, maximum speed, acceleration, IR comp, and current limit. All trimmer pots are non-interactive making calibration quick and easy. Can be used in a variety of applications including: Food Processing, Packaging and Labeling, Machine Tools, Medical Equipment etc., Bison Gear and Engineering motors, gear motors and reducers can be used in a variety of industries and applications including: Food Processing, Packaging and Labeling, Machine Tools, Medical Equipment, Exercise Equipment, Conveying, Ag and Construction, Printing, Commercial Doors and Gates.

Input Voltage:   10-32VDC

Speed Control Ref. Voltage:         DC-DC PWM

Output Voltage VDC:      Up to 95% of Input VDC

Form Factor:      1.01

HP Rating:           1/4 - 1/2

Output Current: 16 Amps

Speed: 88 RPM 

Mounting Style: Chassis - Dimensions: 6" Height X 8.0" Width X 10" Length, - Weight 3 pounds  

Control Type:     Pulse Width Modulation (PWM)

Factory Packaged with User Manual. 

Reference: https://bisongear.com/media/product_downloads/literature/205_0016.pdf

Made in USA

GOULD INSTRUMENTS - CL-212103 - Gordos 9203700 - Puse Width Modulation Amplifier Module.

Note: Amplifier Module without Gould Heat Sink is Gordos P/N 9203700

Hybrid MOSFET Switching Module for Medium Sized Pulse-Width Modulated Amplifiers.

H-Bridge Output Stage- PWM and ENABLE inputs.

Minimum Load Resistance: 10 ohms.

Power Requirements: +/-15 VDC at 3 Amperes.

Physically Polarized 7-pin Encapsulated Package with Integral Black Anodized Heat Sink.

1.4" by 2" by 0.5" with PCB-style mounting pins.

Note: Power Unit with Gould Instruments Heat Sink bonded to unit.

Overall Dimensions: 2" x 1.4" x 0.4" Above Board

Gordos 9203700 Amplifer contains Eight IRFD1Z3 N-Channel Power Field Effect Transistors. 

Internal Module Schematic in Attached pictures.

New Old Stock - Made in USA