Drives

Tridelta Industries, Inc. - M292-010A001-00B - Switched Reluctance Driver

Driver board for M132-013A001-16B SWITCHED RELUCTANCE motor - MOTORS SOLD OUT

Made by Tri-Delta, now a part of Honeywell.

Smaller Version Available P/N 705B0364 = Reference SKU: 149395

Learn More

Tridelta Industries, INC. - 705B0364 REV A

SWITCHED RELUCTANCE motor DRIVER BOARD made by Tri-Delta, now a part of Honeywell.

 

Learn More

Oscillator Motor Drive. DB25S I/O port. S1:6-pin DIP switch. Trimpot adjustment for Base, High, DCC and ACC. 8-pin F receptacle for motor. 115V 1A. 50/60Hz. 9 lbs. Learn More

Motor, controls. Vari-speed. 3HP 575VAC 3-Phase 4.5Amp. Microspeed CX. Control: 115VAC. Applications: The only drive designed exclusively for cranes and hoists. High temperature: rated to +60 degrees C (+140 degrees F). Exclusive 300% current output for maximum motor torque. Gang-Set� programming � sets up in minutes not hours or days. Internal regeneration resistors built-in through 5HP. Learn More

YASKAWA AC DRIVE 315/V7 0.2kWUSED - Input 3-Phase 380-460 VAC, Output: 3-Phase 0-460V 0-400Hz 1.2 Ampfront panel control, 4-digit display weighs 1.2kg Learn More

Indexer Motor Drive. Input 115V 1A. 50/60Hz. Learn More

SLO-SYN Desk-top Programmer. Push button controls for Code data and Field data. 14 mini toggle switches for all other functions. DB25S in rear. Used but great condition, still in box. Learn More

I/O Cable for Slo-Syn motors. 25 pin male to 9 pin male, 10 foot (3 meters). Learn More

I/O Cable for Slo-Syn motors. BCD I/O cable, 15 pin D Male-to-male. 10 foot (3 meters). Learn More

PARAMETRICS ZeroMax - 240721 - PARATROL S 3/4HP DC Motor Speed Control

PARATROL S

3/4HP 115/1/50/60Hz

Adjustable speed drive provides a 60:1 speed range from a base speed of 1800-RPM either permanent magnet or shunt wound.

Installation Specifications Included.

About 8.5 x 11 x 4"

14-gauge steel blue oil/dust-tight enclosure, two conduit holes in bottom.

Approximately: 10 lbs.

Made in USA

New

Learn More

Motor control, Variable Frequency Drive. Input: 115/230V. Output: 60Hz, 120Hz, 240Hz, 400Hz. Learn More

Adj Freq Motor Control Drive 1/2HP. Input: 380-480V 3-Phase 50/60Hz 2A. Output: 380-460V 3-Phase 1-360Hz 1.5A. In enclosure with front panel display and switches. Weighs under 3 lbs. UL CUL CE Style:G1F50CGODA Learn More

Adj Freq Drive 1/2HP Input: 200-240V 1- or 3-Phase 50/60Hz 5.8/3.4A. Output: 200-230V 3-Phase 1-360Hz 2.6A UL CUL CE Learn More

Comptrol - 59-1231 - Axis Position Brushless Motor Controller. 

Terminal Blocks: P1-P2: 24V I/O.

Connectors:

P3: Auxiliary Encoder.

P4: Feedback Encoder.

P5: Serial.

P6: Servo.

115V/60Hz. 11 lbs.

New - Comptrol - Proudly Made in USA.

Learn More

Boards. High Power Motor Driver for Anorad. Has one 7 x 5" heatsink with 8 transistors. Learn More

Servo Motor Amplifier, including TB506 25-pin controller, TB504 15-pin encoder feedback, TB505 9-pin programming port, TB502 15-pin controller I/O, TB501 5-pin power I/O connectors. This has the wiring connections for TB501 and TB506. Instrument marked 4 Amps continuous. Advanced Digital. Learn More

AC Motor Drive. For 2HP 380-460V AC induction motors, NEMA type B. 12-Key control keypad, 2-line 16-character alphanumeric display. RS485. Internal dynamic braking. Constant torque. Output Voltage: 0 - input. Output frequency: 0 - 120Hz, 0.02Hz increments. Seven preset speeds, three Skip frequencies and Windows. Selection modes include "catch a spinning motor" selection. With 92-page manual. New, in box. Input: 380-460V +/-10% 3-phase. Learn More

Motor, controller. VariSwitch, variable limit controller. 21~36VDC Input - Requires handheld control box with EEPROMs, not included. Protective wiring paper seal still in place. NIB. S/N 12601242. Learn More

CUTLER-HAMMER - SV9F10AC-2M0B00 - 1HP 0-500Hz Motor Controller - Less Key Pad/Control Panel.

Output: 3-Phase-0-to-Input Voltage 0-500Hz

I2:4.7/5.6A

HP: 1.0CT/1.5VT

Input: 3 - 208-240V 50/60Hz

3-Phase 4.7/5.6A 

Nema 1 (IP20)

Missing the KeyPad/Control Panel.

CE

Made in Finland

Note: Used

Learn More

Motor, controls. Frequency drive, adjustable, 1/4HP Input: 200-240V 1/3-Phase 50/60Hz 3.1/1.8A. Output:200-230V, 3-phase, 1-360Hz, 1.4A-RMS. Style:G1F25BG0DA. Listed: UL CSA AK. Dimensions: 3.3" wide x 5.2" deep x 4.2" high. Weight: 2 lbs. Learn More

Adjustable Frequency AC Drive Output 2KVA, 230VAC 3-Ph Adjustable 0-240Hz. FWD/REV with DC Braking - Input 2.7KVA, 230VAC 3 Phase 50/60Hz,. 6.8A. Learn More

Johnson Electric - 2706 - DC Motor controller PCB with Three 10 Farad Super-Capacitors & Three Switches.

Johnson Electric is the industry benchmark for micro motor driven actuation. PCB provides steady current source for small motors have uneven loading characteristics. 

PCB Measures 1.280" X 1.630" 

Power Input: 7.2 VDC on Two Gold PCB Terminal Studs

Power Output: Two 1/8" (0.125") Quick Connect Connectors

PCB is a Super-Capacitive Drive Assembly.

7.2VDC input power paralleled with 3 series connected Super-Caps (10F @ 2.5VDC each) to total 3.3 F of capacitance @ 7.5VDC).

Each of the three Super Capacitors manufactured by Maxwell (PC10-270 Series) is rated 10 Farad 2.5VDC. Supercapacitors are used for energy storage undergoing frequent charge and discharge cycles at high current and short duration or applications that require pulse power.

There are also three switches: One SPDT (On/Off Toggle) and Two SPST KW12-2 Microswitches rated 3A@250 VAC & 5A@125VAC.

High brightness LED illuminates when energized.

Note: With the PCB charged to 7VDC, the LED will remain brightly illuminated for greater than 10 minutes.

Motor Assembly removed from "New" from Never Used Battery operated commercial Cutting Tool. 

Applications: Student & Science Projects. Great for disassembly and use of Capacitors, Switches and Super Bright LED.

Note: See SKU 156919 for purchase of the Superior PCB Assembly with Motor.  

 

 

Learn More

Slo-Syn Indexer Motor Drive - Input: 115V 8A 50/60Hz 13 lbs unpacked. Used/Repaired by Warner. (S/N 07027). Learn More

PWM Servo Amplifier, 15Amp 70V., Power-in and Power-out screw terminals, SubD 15 male connector for all other connections. Learn More