Encoders
- DDC - 2467A - Synchro shaft angle data converter$788.00Synchro shaft angle data converter 10-Bit out Navy-MIL#2509543 21-Pin module with military spec's.Data Device Corp. 5998-010291519 Learn More
- Electroswitch - OAK INDUSTRIES - LCE1N-2G09-36-3 - Mechanical Encoder, Rotary. Manual 2 Bit, 9 CY, 36 Position, 700 Series.READY TO SHIP - ONLY 79 LEFT IN STOCK!
Electroswitch - OAK INDUSTRIES - LCE1N-2G09-36-3 Encoder, Rotary, 700 Series.
Electroswitch Electronic Products acquired OakGrigsby.
Manual 2 Bit, 9-cycle, 36-Position with detents.
Gray code.
Housing material: Plastic, Gray.
Operating Temperature: -40C to 85C
Mount: Panel, Threaded-bushing.
Rotatiopn Life: 50,000 Cycles.
Max Operting Speed: 30 RPM
Dimensions: 0.890" (22.6mm) long x 0.830" (21.0 mm) wide plus 3 PC leads x 0.336" (8.5mm) high. Bushing length: (3/3-32), 6.3mm long. Shaft: 0.250" (6.35mm) D x 0.500" (12.7mm) long.
Note: Marked OAK 700. (0.830" x 0.343").700 encoder
Additional Information: https://www.electro-nc.com/oak/p0710.pdf
Learn More - Electroswitch OAK-GRIGSBY INC. - 94Q100-40-00 - Encoder, Rotary. Optical. 100PPR, 3,000 RPM Max.Special Price $28.98 Regular Price $38.50READY TO SHIP - ONLY 22 LEFT IN STOCK!
Electroswitch OAK-GRIGSBY INC. - 94Q100-40-00 - Rotary Encoder.
The 900 Series offers a full line of low cost, rugged optical encoders with incremental output. Well suited for industrial motion and position sensing, their low profile and high resolution also make them ideal for panel mounted applications. A two-channel quadrature code allows the encoder to detect the direction and magnitude of the input motion applied to its shaft.
Optical. 100PPR, 3,000RPM max.
Two Channel Quadrature Output.
Style 2 Output: NC + A B.
Mount: Panel, 1/2" bushing and 1/4" SS shaft, ball bearing type, spins freely.
Package: Die Cast Housing, 1" Square.
Standard 4" 4-pin Ribbon Cable and Connector.
Note: Compact, Robust, Economical. 100 million+ operations.
- GEMCO - 1986-1877 - RESOLVER RATIO: 6/1$175.00READY TO SHIP - ONLY 4 LEFT IN STOCK!
RESOLVER IN HEAVY DUTY MOUNT RATIO 6/1 SHAFT: 3/4" KEYED
Learn More - DYNAPAR / DANAHER - 3201001230 - Encoder, rotary. Incremental 100-PPR.$200.00READY TO SHIP - ONLY 1 LEFT IN STOCK!
Encoder, rotary. Incremental 100-PPR. Bidirectional. Power requirements: current sink, TTL, TTL liner driver: 5 - 26VDC at 80mA max. plus load: CMOS line driver: 5 to 15VDC at 80mA max plus load. Output current: open collector: 40mA sink at 0.5V; line driver: 40mA source/sink. Environmentally sealed enclosure. Shaft: 3/8" single ended. 8830 TTL line driver. MS3102E-16S-1P, 7 pin male connector. Note: Qube. Complete with manufactures wiring instructions and guidelines.
Learn More - BEI - MX21-591-1 - Rotary Optical Encoder. Incremental. Insta-Mount.$129.00Rotary Optical Encoder. Incremental. Insta-Mount. Learn More
- WARNER & SWASEY - 5309-1011 Type 2CW - Optical Encoder 2000-PpR$195.00Optical Encoder Input-2000PPR Range:400,0006-1/8 " high x 5-1/4" dia. With one 32-Pin (M) panel mt military circular connector 3/8" dia shaft 1-1/8" long (Keyed) RFE-USED Make Us An Offer!!!! Learn More
- DISC INSTRUMENTS - Honeywell - PC62D-40-5 - OPTICAL ENCODER - Removed from EquipmentSpecial Price $69.98 Regular Price $120.00READY TO SHIP - ONLY 3 LEFT IN STOCK!
DISC INSTRUMENTS - Honeywell - PC62D-40-5 OPTICAL ENCODER
Made in USA
Used / As removed from Equipment
Learn More - Danaher Controls – Dynapar - HA62509000101 - Encoder 3/8 SHT FLG MT 5-26VDC SD MT- NewSpecial Price $469.98 Regular Price $785.95Danaher Controls – Dynapar - HA62509000101 - Encoder 3/8 SHT FLG MT 5-26VDC SD MT- New Description The Series HA25 is a rugged and reliable encoder for industrial motion applications. The proven design can be the mainstay for any automation project. Mechanical / Electrical Attributes Shaft / Bore Size (mm): 9.525 Connection Location: Radial Disk Material: Glass Flange Material: Aluminum Maximum Operating Speed (RPM): 6000 Connection Type: Connector Termination: 7 Pin MS Connector Shaft Type: Shafted Shaft / Bore Material: Stainless Steel Resolution (PPR): 900 Line Driver Type: 7273 Output Signal: Open Collector w/ 2.2K Ohm Input Voltage: 5-26 VDC Incremental Signal Format: Format A: A Leads B CCW; Index Width (180°) Gated to B' Reverse Polarity Protection: Yes Duty Cycle: 45-55% Short Circuit Protection: Yes Maximum Frequency Response (KHz): 100 Incremental Signals: A Environmental Attributes: Hazardous Area Rating Certification {[None] Minimum Storage Temperature (°C): -40 Noise Immunity Testing Specification: EN61326-1 Hazardous Area Rating: {hazardous_area_rating_certification=[None] Shock Resistance: 50G Humidity Non-Condensing (%): 98 Minimum Operating Temperature (°C): 0 Vibration Resistance: 20G Housing Protection Level: IP66 Maximum Operating Temperature (°C): 70 Maximum Storage Temperature (°C): 90 ROTARY ENCODER 3/8 SHT FLG MT 5-26VDC SD MT DYNAPAR HA62509000101 / HA62509000101, Factory New, INCREMENTAL ENCODER, SHAFTED ENCODER, SERIES HA25, SIZE 25 ENCLOSED, WITH SHAFT SEAL, GLASS DISK, 0900 PPR, FLANGE MOUNT, 3/8" SHAFT, 7 PIN MS CONNECTOR OR CABLE, SINGLE END, W INDEX, 5-26V IN, 5-26V OC W 2.2 KOHM PULLUP OUT, SIDE MOUNT CONNECTOR Made in USA Learn More
- BEI - 924-01070-1003 - Rotary encoder, hollow shaft 1000Cy/Rev$395.00READY TO SHIP - ONLY 1 LEFT IN STOCK!
Express Incremental Rotary encoder. S35F-62-R1-SS-1000-ABZC-7272-SM18 0.625" hollow shaft 1000Cycles/Rev. Electrical: Output: Two chnnels in quadrature. 1,000 cycles/turn. Supply: 5-28VDC 100mA. Complementary outputs. Reverse, overvoltage and short circuit protection. MS-connector. Mech: Shaft Bore: 0.625", with insulating sleeves. Tether Block and pin. Bore Runout: 0.001" T.I.R maximum. Bearings: 52100 SAE High carbon steel. Bearing Housing: Die cast aluminum with protective finish. Cover: Die cast aluminum with protective finish. Bearing Life: 7.5 X 109 revs (50,000 hrs at 2500 RPM) Maximum RPM: 6,000 RPM. Moment of Inertia: 0.019 oz-in-sec2. NEMA 4 & 13 IP65. Weight: 18 oz.
Learn More - ALLEN BRADLEY - AB - 845H-SJHZ14-CMY2 - Optical Incremental Encoder.$200.00Optical Incremental Encoder. Series A. 5VDC 500 CPT. With attached Cannon 10 Pin male circular connector MS3102E18-1P. Complete with manufactures instruction manual. Made in the USA. Learn More
- ALLEN BRADLEY - AB - 845N-SJHN4-CMY2 - Optical Incremental Encoder.$200.00Optical Incremental Encoder. Diemsnsions: 64mm with a shaft 9.5mm. Has a 10 Pin MS3102E18-1P male connector. Mount: 3 hole, 42mm apart. Overall: 91mm tall including shaft. Learn More
- ONO SOKKI - RP-132D0-T1 - Rotary Encoder 3600-P/Rev 12VDC.$374.95Encoder, Rotary. 3600-Pulse/Rev 12VDC. 122mmD x 140mmL with 0.6"[15mm] flatted shaft 1''Long. 5-Inch [127mm] Flange mount. Learn More
-
- AUTOTECH CONTROLS - F2N-01024-5TBFE - Encoder. Marked: Resocoder.$200.00Encoder. Marked: Resocoder. Mount: Panel, mount plate 2.654" square with 4 holes at 2.85" centers. Dimensions: body 2.5" D x 3.42" long, plus shaft, mount flange and connector. Shaft: 0.38" D x 0.846" long. Has one 10 Position male circular connector, part number MS3102E18-1P. Used/Removed from equipment. Overall length of unit is 5.75". Note: No other information available. Learn More
- SEQUENTIAL INFORMATION SYSTEMS - 11A736IZ-15V-H1F1D1B1T - Shaft Angle Encoder 27mm$195.00Shaft Angle Encoder 4.7mm round shaft ~ 27mm diameter, has long cable with MS connector. Learn More
- DYNAPAR / DANAHER - E1110001200 - Encoder, rotary. Incremental 1000-PPR.$200.00Encoder, rotary. Incremental 1000-PPR. Input: TTL (+5VDC): 135mA max. CMOS (+12 or +15VDC): 100mA max. Rugged all metal housing. Mount: Servo face, 1/8" stainless steel shaft. 5V STD. Dimensions: 1.1" OD x 1.2" high. 4 Wire plus braid shield. Minature. Complete with manufactures wiring instructions and guidelines. Learn More
- DYNAPAR / DANAHER - E1103601200 - Encoder, Rotary. Incremental 360-PPR.Special Price $249.98 Regular Price $450.00
DYNAPAR / DANAHER - E1103601200 - Encoder, Rotary.
The Series E12 is a ultra-miniature incremental optical encoder packaged for commercial and lighter-duty industrial applications. Its small size is ideal for confined spaces with a resolution from 100 - 1024 PPR with an optional index.
Rugged Metal Housing - Sub-Compact 1.2” Diameter - Up to 1024 PPR with Optional Index
Incremental 360-PPR.
Input: TTL (+5VDC): 135mA max.
CMOS (+12 or +15VDC): 100mA max.
Rugged all Metal Housing.
Mount: Servo Face, 1/8" Stainless Steel Shaft. 5V STD.
Dimensions: 1.2" OD x 1.2" Body Length.
4 Wire plus Braid Shield.
Miniature Size 12.
Factory New Complete with Manufactures Wiring Instructions and Guidelines.
Learn More - DANAHER CONTROLS - 320010100 - Encoder, rotary. 10 Pulse/Rev, 5-26V.$200.00Encoder, rotary. Bidirectional. 10 Pulse/Rev, 5-26V. Mount: 4 holes = 6/32 UNC-2B threads x 0.187 deep, with 50mm centers. Dimensions: approximately 57mm square x 57mm high. Shaft: 3/8" single ended. 5 Pin male MS connector. Complete with manufactures wiring instructions and guidelines. Qube. Learn More
- BEI/DUNCAN - MX21-590 - Rotary Optical Encoder. Incremental.$129.00Rotary Optical Encoder. Incremental. Insta-Mount. Enclosed, complete with attached 5 conductor shielded cable, single ended. Dimensions: 2.125" D round x 1.045" high with 2 hole mount 1.812" centers. More info: http://www.beiied.com/PDFs2/MX21.pdf Learn More
- Litton - VNB11-17P4 - Rotary shaft encoder.$188.89Rotary shaft encoder. Includes report of acceptance tests, For S/N 74586. Dimensions: 27mm D x 67mm plus 8.8mm long 3.3mm shaft with 34 teflon leads 37" long. No other data available. S/N 74590. New. Learn More
- Litton - MD20-10X2/3820 - Potentiometer, 14.4 Deg CW Rotation.$88.88Potentiometer. Resistance: 5K Ohm (1st) section, 20K Ohm (2nd) section. dissipation: 1 watt. Marked: Rotary actuator travel in angular degrees: 3116. (about 8.65 rotations) CUP-A. Cylindrical servo mount, 6 wire leads. Dimensions: 1.813" (46.0mm) D x 1.993" (50.6mm) high. Single shaft: slotted, 0.125" (3.1mm) D x 0.442" (11.2mm) long (plus 2.0mm seat). Note: Resistor, variable, Wirewound, Precision. Military NSN 5905-00-769-4626. Learn More
- Gefran - EG03-1-R - Tachometer Generator 240 imp/giro$175.89240 PPR - Unidirectional with analogue output linear proportional to speed of rotation. 1V / 100 laps - 1V / 1000-RPM - New mating Connector included - 11-25V 30mA 5,000-RPMmax Fmax=50kHz, for output with hysteresis, X4 signal is a sequence of rectangular pulses. Open Collector Output. Custody: Anodized aluminum face plate, plastic housing. Moment of inertia: 50gr cm - Angular accelerattion: 2000 rad/sec2. Learn More
- ENCODER PRODUCTS CO. - 721 - ACCU-CODER INCREMENTAL SHAFT ENCODER 60ppr$125.00READY TO SHIP - ONLY 1 LEFT IN STOCK!
ACCU-CODER INCREMENTAL SHAFT ENCODER60 PULSES PER REVOLUTIONModel 721 - AC Powered Unidirectional EncoderDesigned for use where DC power is unavailable. It is essentially a 711 with a built-in 120 VAC power supply. MATING CONNECTOR INCLUDED
Made in USA - New Old Stock
Learn More