Motor Protection

CUTLER-HAMMER - HMCP400W5W Circuit Breaker.

3 Pole 400Amp 600VAC/250VDC.

Family: Series C,  Nema Type 3, Molded Case.

Phase: 3

Poles: Three - Pole Magnetic Trip

Voltage: 600

Amperage: 400

Connection: Bolt-On

Protection: Magnetic Only

Functions: I - Instantaneous

AIC Rating: 35kA@480V

Frame Size: K Frame

Magnetic Trip Range : 1250-2500 Amp.

Motor Protector. - Approvals: UL, CSA

Dimensions: Height 10.13" X Length 4.1" X Width 5.5"

Weight: 11 Lb 5 Oz

Used / Removed From Equipment

Note: Difficult to find Item 

Made in USA

Learn More

Cutler-Hammer / Eaton - 10172H- 10172H 334A - Thermal Overload Switch

Status: Discontinued

Pilot Duty Ratings: 115-230 VAC, 30A

Body Approximate Overall Dimensions: 2.2" x 1.95" X 1.0"

New Old Stock - This Item has no Shelf Life

NSN 5925-00-783-5581

Made in USA

Learn More

Circuit breaker. Motor circuit protection 3P 15Amp 600VAC 250VDC. Style 6601C87G05. Push to trip. Eight adjustable trip settings 45 - 150Amps. Mount: Panel. Dimensions: 4-1/8" wide x 6" high x 3-3/4" deep. Used/Removed from equipment. Learn More

BJT595 Carbon Graphite Motor/Generator, Electrical Brush.

Tamped Connections In Four Spots

Split Brush

Heavy Duty Brass Brush Clip

Heavy Duty Copper Shunt

Brush Dimensions: 1.8" Long X 1.30" Wide X 0.55" Thick

Shunt Leads approximately 4" Long

Learn More

Circuit breaker. 3P 30Amp 600VAC 250VDC. Series C. Instantaneous trip settings: 90-300Amps Cu/Al-UL Cu Only-CSA circuit breakers.

Learn More

Warner Electric / Superior - 5371-273-047 - Clutch Brake EUM - 215-1020 90V. The electric clutch and brake has been called the best thing that ever happened to the electric motor. It’s simple, electric clutches and brakes do all the work, while permitting motors to run smoothly and continuously at their most efficient speed by connecting/disconnecting the motor and the load. Fast starts and stops, easy control interface, remote pushbutton operation and smooth acceleration and deceleration are outstanding user benefits. The Warner Electric part number 5371-273-047 refers to an Enclosed UniModule (EUM) clutch/brake with 90V DC voltage and a static torque of 95 ft-lbs. This unit is part of the UM Series and is fully enclosed, making it suitable for industrial applications where contaminants must be excluded. It is designed for high cycle rates and long life, with a frame size of NEMA 213TC/215TC, though the exact model number is UM-210-1020. Part Number: 5371-273-047 Series: UM Series (specifically an EUM model) Function: Motor Clutch/Brake Voltage: 90V DC Static Torque: 95 ft-lbs Model Size: 210 NEMA Frame Size: 213TC/215TC Enclosure: Fully enclosed, suitable for industrial environments to prevent contamination EUM (black) units are totally enclosed to keep wear particles in and exclude contaminants and are suitable for most industrial applications. Made in USA New Learn More

Conduit box kit 100-1. For Clutch-Brake. This Warner Electric conduit box is designed to provide a proper means for field wiring termination and power entry into Warner Electric ATseries clutches and brakes. Kit No. 5162-101-002. Instructions for assembly included. More info: http://www.warnernet.com/PDF/P-1234_pg202-205.pdf Learn More

Armature hub PB/TB-1525 ND. Approx 4"ID and 9.5"OD. Weight: 9 lbs. More info: http://www.warnernet.com/PDF/PB1525F.pdf Learn More

Underspeed monitor. New A300 5-100 PPM 100-240VAC/DC. Has all controls under plastic in a 1/4DIN size, I believe Learn More