OMRON - EE-SPZ301 - Amplified PhotoMicroSensor with Built-In Amplifier (Light Modulation)

OMRON - EE-SPZ301 - Amplified PhotoMicroSensor with Built-In Amplifier (Light Modulation) PHOTOMICROSENSOR Amplified Light-Modulation Long Distance- Retro-Reflective Dark-On small flange-mounting 1.1" tall plus three leads • Photomicrosensor with light modulation for reduced external light interference. • Easy adjustment and operation validation with an operation indicator (lights when light is incident). • Wide operating voltage range: 5 to 24 VDC • Supports connection with Programmable Controllers (PLCs). • Easy-to-wire connectors assure easy maintenance. Power supply voltage 5 to 24 VDC ±10%, ripple (p-p): 5% max. Current consumption Average: 15 mA max., Peak: 50 mA max. Response frequency 100 Hz Control output: 5 to 24 VDC, 80 mA load current with a residual voltage of 1.0 V max., 10 mA load current with a residual voltage of 0.4 V max. Light source: GaAs infrared LED (pulse lighting) with a peak wavelength of 940 nm Indicator Light indicator (red) Light-receiving element: Si photodiode (Maximum sensitivity wavelength: 850 mm) Ambient illumination: 3,000 lx max. with incandescent light or sunlight on the surface of the receiver Degree of protection: IEC Standard IP50 (excluding terminal section.) Ambient temperature Operating: −10 to +55°C Storage: −25 to +65°C Ambient humidity Operating: 5% to 85% Storage: 5% to 95% Permissible bending Radius of Fiber Unit 25 mm Maximum fiber length Through-beam: 180 cm Reflective: 100 cm Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions Shock resistance Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions Cable 2 m max. (Thickness: AWG24 min.) Weight Approx. 3.0 g New - Rare – Difficult Component to Find Made in Japan Alternates: 83F1995, 653-EE-SPZ301A