Solenoid

Solenoid, AC. This solenoid has a T-shaped laminated design plunger and laminated steel frame. It has the unique ability to hold an exceptionally heavy load with a minium of humming or vibration. To minimize the humming or chattering of most AC solenoids, the contact surfaces of the laminated frame and plunger are machined to provide a smooth and flush contact surface.

Laminate solenoids consist of a laminated steel frame, a coil, and a movable plunger in the center of the coil. When the coil is energized the plunger is pulled into the coil

Operation: Pull.

Load force: >48 oz.

Stroke length: 0.6".

Duty cycle: Continuous.

Coil: 26VAC 0.75A 5.5 Ohms.

Plunger config: rectangular w/pin-in-U.

Mech: 8 holes on base.

Body dim: 1.2"x1.5"x2.5" .

Weight: 0.42 lbs.

Connection: 3/16" male spades.

Applications: Wurlitzer Solenoid 411823-1 Turntable Speed Shift Coil.

         Seeburg M100C Phonograph Latch Bar Solenoid

         Seeburg SS-160 Showcase Jukebox

Similar to Dormeyer or Guardian Electric Industrial/Commercial Solenoids tailored
for high force, short stroke solutions. Continuous or intermittent duty; on/off operation; standard and laminates with life from 50,000 to 100,000 cycles, offering pull-in engagement which is well-suited to lock/latch operations.

Note: ALT P/N: SOL-20.

USED May have some rust on the frame.

Learn More

PSP MFG - 5945-502-4495 SD-845 Solenoid, DC.

Operation: Pull.

Load force: >48 oz.

Stroke length: 0.75.

Duty cycle: Continuous.

Coil: 24VDC 0.58A 41 Ohms.

Plunger config: Round with 3/8" loop.

Mech: Rectangular flange.

Body dim: 1.5"D x 4". Weight: 1.1 lbs.

Connection: MS3102A-125-3P Conn. Formerly:3380-708550-9985.

Learn More

GUARDIAN - A420-064181-00 Solenoid, DC.

Operation: Pull.

Load force: >16 oz.

Stroke length: 0.5.

Duty cycle: Continuous.

Coil: 24VDC 0.3A 77 Ohms.

Plunger config: round w/ slot & hole.

Mech: 2 6-32 holes in base.

Body Dimensions: 1.4"x0.85"x2.75".

Weight: 0.2 lbs.

Connection: Polarized coil w/int.diode, narrow pin (+).

Learn More

Dormeyer Industries Heavy Duty Solenoid P4-1L. Coil voltage 12VDC, Pull-type, Continuous duty cylindrical solenoid 0.75" diameter x 1.5" behind threaded mounting bushing 0.55", nut included. 24-ohm coil = half an ampere.

Learn More

Solenoid, DC. Operation: pull. Load force: >48 oz. Stroke length: 0.75. Duty cycle: intermittent. Coil: 26VDC 12A 2.7 Ohms. Plunger config: round w/ 1/4-32 hole. (Will extend approximately 3/4" away form unit). Mech: square flange/4 holes. Dimensions: overall 3" x 2-1/2" x 2-1/4" high. Weight: 2.2 lbs. Connection: 8-32 studs for coil connections. Learn More

MAGNET SCHULTZ OF AMERICA MSA - 6635/0020 - S-0-6635 Solenoid, DC.

Magnet-Schultz of America (MSA) is a leading innovator and manufacturer of electromagnetic devices including standard, specialty and totally custom—solenoids, actuators, voice coils and value-added assemblies.

Operation: Pull.

Load force: >48 oz.

Stroke length: 1" .

Duty cycle: Continuous.

Coil: 24VDC 0.33A 72 Ohms.

Plunger Config: Round w/Slot & Hole.

Mech: 2 pairs of side holes.

Body dim: 0.95"x1.2"x1.95".

Weight: 0.28 lbs.

Connection: 3/16" Male Quick connect Spades.

Additional Information: https://www.magnet-schultz.com/en/solenoids/

Learn More

Electric Solenoid 63A-588 , 1.5" Dia x 3" long New. Learn More

GUARDIAN - A420-065891-00 Solenoid.

Mechanical solenoids are used to stop, clamp, position, switch, latch, lock, release, hold, and divert motor motion. 

230 VAC

Operation: Pull.

Load force: >32 oz.

Stroke length: 0.5 Inch

Duty cycle: Continuous.

Coil: 230VAC 0.09A 340 Ohms.

Plunger config:Rectangular w/u-brkt.

Mech: 8 holes on base.

Body dim: 2.3"x1.2"x1.5".

Weight: 0.41 lbs.

Connection: 1/4" spades on coil.

Life Expectancy >500,000 Cycles

230V 50HZ SOLENOID NEW DBL MARKED 13-7-160883

Learn More

GUARDIAN - A420-060997-00 Solenoid

24 VDC Tiny SOLENOID

0.5" DIA x 1" Long - ROUND W/ BASE MT

0.195" plunger with locking device at tip

E120-59

Addressograph Multigraph P/N E120-59 - Rare - an't find these anymore

Vinatge New Old Stock

Learn More

GUARDIAN - A420-062076 Solenoid, DC.

Operation: Pull.

Load force: >16 oz.

Stroke length: 0.3.

Duty cycle: Continuous.

Coil: 115VDC 0.045A 3200 Ohms.

Plunger config: Round w/slot & hole.

Mech: 2 4-40 Holes in base.

Body dim: 0.75"x0.75"x1.6".

Weight: 0.1 lbs.

Connection: 6" 24 ga leads.

Learn More

DECCO DETROIT COIL COMPANY - 9-115 - Laminated Pull Solenoid

Built for heavy duty applications and long service life

Solenoid, AC.

Operation: Pull.

Load force: >32 oz.

Stroke length: 0.6.

Duty cycle: Continuous.

Coil: 115VAC 2A 61 Ohms.

Plunger config: Rectangular w/hole.

Body dim: 2"x1.2"x2.4".

Weight: 0.58 lbs.

Connection: 8" 16AWG leads w/hook lugs.

Learn More

This solenoid has a T-shaped laminated design plunger and laminated steel frame. It has the unique ability to hold an exceptionally heavy load with a minium of humming or vibration. To minimize the humming or chattering of most solenoids, the contact surfaces of the laminated frame and plunger are machined to provide a smooth and flush contact surface.

Laminate solenoids consist of a laminated steel frame, a coil, and a movable plunger in the center of the coil. When the coil is energized the plunger is pulled into the coil

E120-87 - Linear Solenoid,

AC. Operation: Pull.

Load force: >48 oz.

Stroke length: 0.75"

Duty cycle: Continuous.

Coil: 115VAC 0.24A 475 Ohms.

Plunger Config: Rectangular w/u-brkt.

Mech: 8 holes on base.

Body dim: 1.2"x1.5"x2.5".

Connection: solder lugs on coil.

Weight: 0.4 lbs.

 

Learn More

RBM CONTROLS/ESSEX - 70-120226-5,  PS50053-5-2 High Current Starter Solenoid Relay

36VDC METAL HI CURRECT SOLENOID RELAY (SPST N.O.)

Estimating 200Amps Solenoid 

Two Large Copper Contactor Terminals: 5/16-24,

Single Coil Terminal: 10/32, Case Ground.

Flat Flange mounting with two large slots 2.1" apart.

Extra heavy duty corrosion resistant steel body.

Marked 70-120226-5 RFE looks in good condition

As Removed - Used

 

Learn More

30VDC SOLENOID Heavy - 1.5"OD cylindrical - threaded plunger 0.61"OD - two "wings" for mounting (undrilled) 2-pin MS connector - Aircraft surplus - NEW Old Stock Learn More

MAGNET SCHULTZ OF AMERICA - S-0-7535 Solenoid,

AC. Operation: Push/Pull.

Load force: 9.6 oz at 0.2" stroke.

Stroke length: 0.2. Duty cycle: continuous.

Coil: 120VAC 225 Ohms.

Plunger config: round 0.31"D plunger w/ 0.094"D 1.6"L rod.

Mech: 2 0.11" holes 1" apart.

Body dim: 1.86" x 0.94"W x 1.87"L plus 3" plunger.

Weight: 5 oz.

Connection: 2 x 0.187" terminals.

Genuine Magnet Schultz - New Old Stock

Learn More

NEW 24VDC PULL SOLENOIDS box frame solenoid, maximum 5 oz at 0.5 inches stroke, minimum 48 oz at 0.12 inch- 52-0hm coil - Continuous Duty - box frame body: 1.65" x 1.4" x 1.8". Learn More

GUARDIAN - TP4X16-I-24D Cylinrical Solenoid, DC.

Operation: Push.

Load Force: >6 oz. (6/116 N)

Holding Force: 22 Oz

Stroke length: 1.

Duty cycle: Intermittent.

Coil: 24VDC,  0.330 Amp, 72.7 Ohm.

Coil power: 8.3 Watt

Plunger config: round with 0.062" D push pin.

Mech: 3/8-32 thrd col w/brkt.

Body dim: 0.5"D x 2.023" long, overall 3.714" including internal pin. (12.7 X 51 mm) 

Weight: 0.1 lbs.

Connection: with 8", 24 AWG leads.

P/N: A420-066086-00

Learn More

GUARDIAN - A420-062396-00 Solenoid, AC.

Operation: Push.

Load force: >16 oz.

Stroke Length: 0.3.

Duty cycle: Intermittant.

Coil: 115VAC 0.3A 63 Ohms.

Plunger Config: Round w/.75" knob.

Mech: 4 8-32 holes.

Body Dimensions: 1.65"x1.45"x2.3".

Weight: 0.55 lbs.

Connection: 5" 18 ga. leads.

Learn More

GUARDIAN - A420-060761-00 Solenoid, DC.

Operation: open/close.

Load force: >48 oz.

Stroke length: 1.

Duty cycle: continuous.

Coil: 170VDC 0.109A 1560 Ohms.

Plunger config: round w/slot & hole.

Mech: 2 pairs of side holes.

Body dim: 0.95"x1.2"x1.95".

Weight: 0.27 lbs.

Connection: 6" 22 ga leads.

Note: Alt P/N: E120-54.

Learn More

GUARDIAN - A420-059001-00 Solenoid 

24VDC @ 250ma

Dimensions: 1-3/4" long x 1/2" x 1/4 plungerwith 1" pull @ 24VDC .

Unit measures 1-1/2" high x 1-3/4" deep x 1-1/8" wide.

Unit can be flush mounted by any of eight 3/16" holes.

New Old Stock

Learn More

Solenoid, AC. Operation: pull. Load force: >48 oz. Stroke length: 0.75. Duty cycle: continuous. Coil: 24VAC 3A 2.4 Ohms. Plunger config: rectangular w/u-brkt. Mech: 4 hole / 4 slots. Body dim: 2.5"x1.8"x2" . Weight: 1.0 lbs. Connection: solder lugs on coil. Note: Some may have a 0.47uF 200VDC capacitor attached. Learn More

Solenoid. Resistance: 5K Ohm. Dimensions: 1.4" x 1.5" x 1.6" heavy slotted 0.5" D plunger. Learn More

Electric actuator. 1.15" OD x 0.83", 3-wire. Dimensions: 1.160" D x 0.830" high, plus spring actuator.

Learn More

Solenoid, DC. Intermittent duty cycle 24VDC pull, 14 ohm coil, 100 ounce. Maximum 118.7 oz at .025 in., minimum 92.5 oz at .025 in., primary function pull, intermittent duty cycle. Package: cylindrical 1.5" OD x 2" long. Threaded bushing panel mount. Note: REGDON 24VDC-ID. Learn More