Solenoid
- Unidentified MFG - 411823-1 - Solenoid, Laminate Open Frame AC. Coil: 26VAC, 0.75A, 5.5 Ohms.IN STOCK - MORE THAN 500 READY TO SHIP!
411823-1 T-Shaped Solenoid, 26 VAC Coil.
This solenoid has a T-shaped laminated design plunger and laminated steel frame. It has the unique ability to hold an exceptionally heavy load with a minium of humming or vibration. To minimize the humming or chattering of most AC solenoids, the contact surfaces of the laminated frame and plunger are machined to provide a smooth and flush contact surface.
Solenoid consists of a laminated steel frame, a coil, and a movable plunger in the center of the coil. When the coil is energized the plunger is pulled into the coil.
Operation: Pull.
Load Force: >48 oz.
Stroke Length: 0.6".
Duty Cycle: Continuous.
Coil: 26VAC 0.75A 5.5 Ohms.
Plunger Configuration: Rectangular w/pin-in-U.
Mechanical: 8 holes on Base.
Body Dimensions: 1.2"x1.5"x2.5" .
Weight: 0.42 lbs.
Connection: 3/16" Male Solder Spades.
Applications: Wurlitzer Solenoid 411823-1 Turntable Speed Shift Coil.
Seeburg M100C Phonograph Latch Bar Solenoid
Seeburg SS-160 Showcase Jukebox
Science Projects
Similar to Dormeyer or Guardian Electric Industrial/Commercial Solenoids tailored
for high force, short stroke solutions. Continuous or intermittent duty; on/off operation; standard and laminates with life from 50,000 to 100,000 cycles, offering pull-in engagement which is well-suited to lock/latch operations.Alternates: SOL-20.
Note: We have Solenoids with the power connections on either the left or right side. See last two pictures to identify options and advise if you need specific right or left connections.
USED May have some rust on the frame.
Learn More - PSP MFG - 5945-502-4495 - SD-845 - Solenoid, DC. Coil 24VDC, 0.58A, 41 Ohms.Special Price $18.98 Regular Price $24.00IN STOCK - MORE THAN 100 READY TO SHIP!
PSP MFG - 5945-502-4495 SD-845 Solenoid, DC.
Operation: Pull.
Load force: >48 oz.
Stroke length: 0.75.
Duty cycle: Continuous.
Coil: 24VDC 0.58A 41 Ohms.
Plunger config: Round with 3/8" loop.
Mech: Rectangular flange.
Body dim: 1.5"D x 4". Weight: 1.1 lbs.
Connection: MS3102A-125-3P Conn. Formerly:3380-708550-9985.
Learn More - GUARDIAN ELECTRIC - A420-064181-00 - Solenoid, DC. Coil: 24VDC 0.3A 77 Ohms.IN STOCK - MORE THAN 100 READY TO SHIP!
GUARDIAN ELECTRIC - A420-064181-00 - Solenoid, DC.
Operation: Pull.
Load Force: >16 oz.
Stroke Length: 0.5.
Duty Cycle: Continuous.
Coil: 24VDC 0.3A
Coil Resistance: 77 Ohms.
Plunger Config: Round w/ Slot & Hole.
Mech: Two 6-32 holes in base.
Body Dimensions: 1.4 "x 0.85" x 2.75".
Double Marked: 11-7-156034
Weight: 0.2 lbs.
Connection: Polarized coil w/int.diode, narrow pin (+).
Note: Large Discount for Manufacturer's Vacuum Package of 20 Pieces
Made in USA
Learn More - DORMEYER INDUSTRIES - P4-1L - DC Solenoid, Coil Voltage 12VDC.Special Price $9.98 Regular Price $14.95READY TO SHIP - ONLY 51 LEFT IN STOCK!
DORMEYER INDUSTRIES - P4-1L - DC Solenoid
Heavy Duty Solenoid P4-1L.
Coil Voltage 12VDC
Pull-Type
Plunger Dimensions: Approximate Overall Length is Nearly 2" with Approximately 1.5" is within Coil.
24-Ohm Coil - Half an Ampere.
Continuous Duty Cylindrical Solenoid
Dimensions: 0.75" Diameter x 1.5" behind threaded mounting bushing 0.55", nut included.
Made in USA
New Old Stock
Learn More - Meletron - 137 - Solenoid, DC. Coil: 26VDC 12A 2.7 Ohms.Special Price $17.48 Regular Price $31.99Out of stockSolenoid, DC. Operation: pull. Load force: >48 oz. Stroke length: 0.75. Duty cycle: intermittent. Coil: 26VDC 12A 2.7 Ohms. Plunger config: round w/ 1/4-32 hole. (Will extend approximately 3/4" away form unit). Mech: square flange/4 holes. Dimensions: overall 3" x 2-1/2" x 2-1/4" high. Weight: 2.2 lbs. Connection: 8-32 studs for coil connections. Learn More
- MAGNET SCHULTZ OF AMERICA - MSA 6635/0020 - S-06635 - Solenoid, DC. Coil: 24VDC 0.33A.Out of stock
MAGNET SCHULTZ OF AMERICA MSA - 6635/0020 - S-06635 Solenoid, DC.
Magnet-Schultz of America (MSA) is a leading innovator and manufacturer of electromagnetic devices including standard, specialty and totally custom—solenoids, actuators, voice coils and value-added assemblies.
Operation: Pull.
Load force: >48 oz.
Stroke Length: 1" .
Duty Cycle: Continuous.
Coil: 24VDC 0.33A 72 Ohms.
Plunger Config: Round w/Slot & Hole.
Mech: 2 pairs of side holes.
Body dim: 0.95"x1.2"x1.95".
Weight: 0.28 lbs.
Connection: 3/16" Male Quick connect Spades.
Additional Information: https://www.magnet-schultz.com/en/solenoids
Learn More - GUARDIAN ELECTRIC - A420-065891-00 - 13-7-160883 -Pull Solenoid, Coil: 230VAC 0.09A 340 Ohms.READY TO SHIP - ONLY 73 LEFT IN STOCK!
GUARDIAN - A420-065891-00 Solenoid.
Mechanical solenoids are used to stop, clamp, position, switch, latch, lock, release, hold, and divert motor motion.
230 VAC
Operation: Pull.
Load force: >32 oz.
Stroke length: 0.5 Inch
Duty cycle: Continuous.
Coil: 230VAC 0.09A 340 Ohms.
Plunger config:Rectangular w/u-brkt.
Mech: 8 holes on base.
Body dim: 2.3"x1.2"x1.5".
Weight: 0.41 lbs.
Connection: 1/4" spades on coil.
Life Expectancy >500,000 Cycles
230V 50HZ SOLENOID NEW DBL MARKED 13-7-160883
Learn More - GUARDIAN - A420-062076 - Solenoid, DC. Coil: 115VDC 0.045A 3200 Ohms.Special Price $8.98 Regular Price $12.50READY TO SHIP - ONLY 92 LEFT IN STOCK!
GUARDIAN - A420-062076 Solenoid, DC.
Operation: Pull.
Load force: >16 oz.
Stroke length: 0.3.
Duty cycle: Continuous.
Coil: 115VDC 0.045A 3200 Ohms.
Plunger config: Round w/slot & hole.
Mech: 2 4-40 Holes in base.
Body dim: 0.75"x0.75"x1.6".
Weight: 0.1 lbs.
Connection: 6" 24 ga leads.
Learn More - DECCO - DETROIT COIL COMPANY - 9-115 - Laminated Pull Solenoid Assembly - Coil: 115AC. 60 Cycles 2A 61 Ohms.IN STOCK - MORE THAN 100 READY TO SHIP!
DECCO DETROIT COIL COMPANY - 9-115 - Laminated Pull Solenoid
Built for heavy duty applications and long service life
Solenoid, AC.
Operation: Pull.
Load force: >32 oz.
Stroke length: 0.6.
Duty cycle: Continuous.
Coil: 115VAC 2A 61 Ohms.
Plunger config: Rectangular w/hole.
Body dim: 2"x1.2"x2.4".
Weight: 0.58 lbs.
Connection: 8" 16AWG leads w/hook lugs.
Learn More - Unidentified MFG - E120-87 - Linear Solenoid, DC. Coil: 115VAC 0.24A 475 Ohms.Special Price $18.98 Regular Price $34.95READY TO SHIP - ONLY 78 LEFT IN STOCK!
This solenoid has a T-shaped laminated design plunger and laminated steel frame. It has the unique ability to hold an exceptionally heavy load with a minium of humming or vibration. To minimize the humming or chattering of most solenoids, the contact surfaces of the laminated frame and plunger are machined to provide a smooth and flush contact surface.
Laminate solenoids consist of a laminated steel frame, a coil, and a movable plunger in the center of the coil. When the coil is energized the plunger is pulled into the coil
E120-87 - Linear Solenoid,
AC. Operation: Pull.
Load force: >48 oz.
Stroke length: 0.75"
Duty cycle: Continuous.
Coil: 115VAC 0.24A 475 Ohms.
Plunger Config: Rectangular w/u-brkt.
Mech: 8 holes on base.
Body dim: 1.2"x1.5"x2.5".
Connection: solder lugs on coil.
Weight: 0.4 lbs.
New Old Stock
- MAGNET SCHULTZ OF AMERICA - S-07535 - Solenoid, AC. Coil: 120VAC.Special Price $18.98 Regular Price $26.50Out of stock
MAGNET SCHULTZ OF AMERICA - S-07535 Solenoid,
AC. Operation: Push.
Load force: 9.6 oz at 0.2" Stroke.
Stroke Length: 0.2. Duty cycle: continuous.
Coil: 120VAC 225 Ohms.
Holding Force: 51 Oz
Plunger config: round 0.31"D plunger w/ 0.094"D 1.6"L rod.
Mech: 2 0.11" holes 1" apart.
Body dim: 1.86" x 0.94"W x 1.87"L plus 3" plunger.
Weight: 5 oz.
Connection: 2 x 0.187" terminals.
Genuine Magnet Schultz - New Old Stock
Additional Information: https://magnet-schultzamerica.com/
Learn More - MAGNET SCHULTZ OF AMERICA - S-06675 - 24VDC Pull Solenoid, Continuous Duty.Special Price $10.98 Regular Price $14.50
MAGNET SCHULTZ OF AMERICA - S-06675 - NEW
24VDC, 11.0 Watt, Pull Solenoid Box Frame Solenoid
holding Force: 198 Oz
Maximum 5 oz at 0.5 inches stroke, Minimum 48 oz at 0.12 inch
52-0hm Coil - Continuous Duty
Box Frame Body: 1.622" x 1.441" x 1.752".
Additional Information: https://magnet-schultzamerica.com
Learn More - GUARDIAN - A420-059001-00 - Solenoid New 24VDCREADY TO SHIP - ONLY 20 LEFT IN STOCK!
GUARDIAN - A420-059001-00 Solenoid
24VDC @ 250ma
Dimensions: 1-3/4" long x 1/2" x 1/4 plungerwith 1" pull @ 24VDC .
Unit measures 1-1/2" high x 1-3/4" deep x 1-1/8" wide.
Unit can be flush mounted by any of eight 3/16" holes.
New Old Stock
Learn More - CONTROLS CO - 4-211 - Solenoid, AC. Coil: 24VAC 3A 2.4 Ohms.Special Price $8.98 Regular Price $14.98Out of stock
CONTROLS CO - 4-211 Solenoid, AC.
Operation: Pull.
Load force: >48 oz.
Stroke length: 0.75.
Duty cycle: Continuous.
Coil: 24VAC 3A 2.4 Ohms.
Plunger config: rectangular w/u-brkt.
Mech: 4 hole / 4 slots.
Body dim: 2.5"x1.8"x2" .
Weight: 1.0 lbs.
Connection: Solder lugs on coil.
Note: Some may have a 0.47uF 200VDC capacitor attached.
Used / Removed from Equipment
Learn More - MAGNET SCHULTZ OF AMERICA - MSA 6244/004 - S-06244 - R24X13 - Solenoid, DC. Intermittent Duty Cycle 24VDC Pull.Special Price $12.98 Regular Price $14.50
MAGNET SCHULTZ OF AMERICA - MSA- 06244 - S-0-6244 - R24X13 - Solenoid, DC.
Intermittent Duty Cycle
24 VDC Pull
14 Ohm Coil, 100 ounce.
Maximum 118.7 oz at .025 in., Minimum 92.5 oz at .025 in.
Primary Function Pull, Intermittent Duty Cycle.
Package: Cylindrical 1.5" OD x 2" Long.
Threaded Bushing Panel Mount.
Note: REGDON 24VDC-ID.
Proudly Made in USA
Learn More - GUARDIAN - A420-064182-00 - Solenoid, DC. 24VDC 0.3Amp.IN STOCK - MORE THAN 100 READY TO SHIP!
GUARDIAN - A420-064182-00 Solenoid, DC.
Operation: Pull in Against Spring Load Force: >16 oz.
Stroke Length: 0.5 Inch.
Duty cycle: Continuous.
Configuration: D-Frame
Coil: 24VDC, 0.3 Amp, 77 Ohms.
Plunger Configuration: round w/ slot & hole.
Connection: Polarized Coil w/internal diode, narrow pin (+).
Special Features: Heavy duty
Mounting Mechanical: 2 6-32 holes in base.
Overall Body Dimensions: 1.4"x0.85"x2.75".
Weight: 0.2 lbs.
Learn More - GUARDIAN - A420-066410-00 - Solenoid, DC. Coil: 6VDC 0.37A 16 Ohms.READY TO SHIP - ONLY 48 LEFT IN STOCK!
GUARDIAN - A420-066410-00 Solenoid, DC.
Operation: Pull.
Load force: >6 oz.
Stroke length: 0.15.
Duty cycle: Intermittant.
Coil: 6VDC 0.37A 16 Ohms.
Plunger Config: Round w/slot head .
Mech: PCB mount.
Body dim: 0.5"x.375"x1.
Weight: 0.01 lbs.
Connection: PCB termination pins.
Vinatge New Old Stock
Learn More - MAGNET SCHULTZ OF AMERICA MSA - S-06697 - Solenoid, DC. Coil: 110VDC 0.114A.Special Price $18.98 Regular Price $22.50READY TO SHIP - ONLY 2 LEFT IN STOCK!
MAGNET SCHULTZ OF AMERICA MSA - S-06697 Solenoid, DC.
Operation: Pull.
Load force: >48 oz.
Stroke length: 1.
Duty Cycle: Continuous.
Coil: 110VDC 0.114A 1060 Ohms.
Plunger config: Round w/slot & hole.
Mech: 4 8-32 holes on 2 sides.
Body Diameter: 1.4"x1.6"x4" .
Weight: 0.8 lbs.
Connection: 3/16" male spades.
Learn More - MAGNET SCHULTZ OF AMERICA - S-06224 - Solenoid, DC. Coil: 24VDC 0.83A, Family R16X9.Special Price $10.98 Regular Price $14.50
MAGNET SCHULTZ OF AMERICA - S-06224 - Solenoid, DC. Family R16X9
Operation: Pull.
Holding Force: 125 Oz
Load force: >48 oz.
Stroke length: 0.5.
Duty cycle: continuous.
Coil: 24VDC, 19W, 0.83A 29 Ohms.
Plunger config: Round w/slot & hole.
Mech: 3/4-24 Collar w/Nut.
Body dim: 1"D x 2"L.
Weight: 0.22 lbs.
Connection: 5" 22 ga leads.
Additional Information: https://magnet-schultzamerica.com/
Learn More - MAGNET SCHULTZ OF AMERICA - MSA - S-0-6171 - Solenoid, tubular Cylindrical, 12VDC.READY TO SHIP - ONLY 46 LEFT IN STOCK!
MAGNET SCHULTZ OF AMERICA - MSA - S-0-6171 Solenoid, Tubular Cylindrical.
Pull type, 12VDC/72 Ohm coil.
Holding force: 4.5-oz.
Duty: Continuous.
Body dimensions 0.44"-OD x 1.67".
Long threaded bushing mount; max pull from end of shaft is 1".
Armature size: 1.44" long x 0.157" D.
Nut and washer provided.
Learn More - DECCO - 9-115 230/60 - Solenoid, AC. Coil: 230VAC 2A 61 Ohms.$3.95Out of stockSolenoid, AC. Operation: pull. Load force: >32 oz. Stroke length: 0.6. Duty cycle: continuous. Coil: 230VAC 2A 61 Ohms. Plunger config: rectangular w/hole. Body dim: 2"x1.2"x2.4". Weight: 0.58 lbs. Connection: 8" 16 ga leads. Learn More
- MAGNET SCHULTZ OF AMERICA - S-0-6698 - Solenoid, DC. Coil: 110VDC 0.3A.Special Price $18.98 Regular Price $26.50
MAGNET SCHULTZ OF AMERICA - S-06698 - Solenoid, DC.
Operation: Pull.
Load force: >48 oz.
Stroke length: 1.
Duty Cycle: Intermittant.
Coil: 110VDC 0.3A 330 Ohms.
Plunger Config: Round w/slot & hole.
Mech: 4 8-32 holes on 2 sides.
Body dim: 1.4"x1.6"x4".
Weight: 0.8 lbs.
Connection: 3/16" male spades.
Learn More - MAGNET SCHULTZ OF AMERICA - S-06384 - R8X16 - Solenoid, DC. Coil: 24VDC 0.12A 192 Ohms.Special Price $12.98 Regular Price $16.50
MAGNET SCHULTZ OF AMERICA - S0-6384 - R8X16 Solenoid, DC.
Operation: Pull.
Load Force: 4.5 oz.
Stroke length: >1.
Coil Resistance: 193 Ohms
Duty Cycle: Continuous.
Coil: 24VDC 0.12A 192 Ohms.
Plunger config: Tubular.
Mech: 3/8" threaded bushing w/ nut.
Body dim: 0.5"H x 2.65"L.
Weight: 1.5 oz.
Connection: 2" behind panel.
Note: Regdon R8X16-6384.
Additional Information: https://magnet-schultzamerica.com/
Learn More - MAGNET SCHULTZ OF AMERICA - S-06173 - R7X9/6173 - Solenoid, DC. Coil: 24VDC 0.083A.Special Price $12.98 Regular Price $14.50
MAGNET SCHULTZ OF AMERICA - S-06173 - R7X9/6173 Solenoid,
DC. Operation: Pull.
Load Force: 4.5 oz.
Stroke Length: 0.5.
Duty Cycle: Continuous.
Coil: 24VDC 0.083A 290 Ohms.
Plunger Config: Tubular.
Mech: 0.313" Threaded Bushing.
Body Diameter: 0.45"H x 1.67" w/ Plunger.
Weight: 0.5 oz.
Connection: 6" Wire leads.
Learn More