Solenoid

PSP MFG - 5945-502-4495 SD-845 Solenoid, DC.

Operation: Pull.

Load force: >48 oz.

Stroke length: 0.75.

Duty cycle: Continuous.

Coil: 24VDC 0.58A 41 Ohms.

Plunger config: Round with 3/8" loop.

Mech: Rectangular flange.

Body dim: 1.5"D x 4". Weight: 1.1 lbs.

Connection: MS3102A-125-3P Conn. Formerly:3380-708550-9985.

Learn More

GUARDIAN ELECTRIC - A420-064181-00 - Solenoid, DC.

Operation: Pull.

Load Force: >16 oz.

Stroke Length: 0.5.

Duty Cycle: Continuous.

Coil: 24VDC 0.3A

Coil Resistance: 77 Ohms.

Plunger Config: Round w/ Slot & Hole.

Mech: Two 6-32 holes in base.

Body Dimensions: 1.4 "x 0.85" x 2.75".

Double Marked: 11-7-156034

Weight: 0.2 lbs.

Connection: Polarized coil w/int.diode, narrow pin (+).

Note: Large Discount for Manufacturer's Vacuum Package of 20 Pieces

Made in USA

Learn More

DORMEYER INDUSTRIES - P4-1L - DC Solenoid. Upgrade your equipment with the Dormeyer Industries P4-1L DC Tubular Solenoid, a robust and reliable component designed to meet the demands of heavy-duty applications. With a 12VDC coil voltage, this solenoid is engineered for optimal performance and longevity, ensuring your systems operate with precision and efficiency. Crafted in the United States, this unit reflects the quality and durability synonymous with the Dormeyer brand. The part type P4-1L is a direct replacement for specific models, making installation straightforward. With a single unit quantity available, secure this essential part for your maintenance needs. Status: Discontinued Heavy Duty Solenoid P4-1L. Coil Voltage 12VDC TYpe: Pull-Type Closed Frame Technology: Electromechanical Stroke: 0.5" Plunger Dimensions: Approximate Overall Length is Nearly 2" with Approximately 1.5" is within Coil. 24-Ohm Coil - Half an Ampere. Continuous Duty Cylindrical Solenoid Connections: Wire Leads Shaft Detail: Clevis Mount: Panel Mount Dimensions: 0.75" Diameter x 1.5" behind threaded mounting bushing 0.55", nut included. Out performs Lower Duty Cycle Ledex Dormeyer Sale (Johnson Electric) 195204-X30 Made in USA New Old Stock - Difficult Solenoid to Find - Former Retail cost was $39.95 Learn More

HYDRO AIRE - 335974-11 - 63A-588 - Electric Solenoid

Crane Aerospace

The high quality, precision and dependability of HYDRO Aire products make them ideal for many of the most demanding industries on earth.

Electric Solenoid 63A-588

Steel Body and Plunger

Plunger ID Thread 8-32

Dimensions: 1.5" Diameter x 3" Long Including Connector, Body 2.0" Long

Safety Wired Connector

New Old Stock - Aerospace Solenoid

Made in USA

Learn More

GUARDIAN - A420-065891-00 Solenoid.

Mechanical solenoids are used to stop, clamp, position, switch, latch, lock, release, hold, and divert motor motion. 

230 VAC

Operation: Pull.

Load force: >32 oz.

Stroke length: 0.5 Inch

Duty cycle: Continuous.

Coil: 230VAC 0.09A 340 Ohms.

Plunger config:Rectangular w/u-brkt.

Mech: 8 holes on base.

Body dim: 2.3"x1.2"x1.5".

Weight: 0.41 lbs.

Connection: 1/4" spades on coil.

Life Expectancy >500,000 Cycles

230V 50HZ SOLENOID NEW DBL MARKED 13-7-160883

Learn More

GUARDIAN - A420-060997-00 Solenoid

24 VDC Tiny SOLENOID

0.5" DIA x 1" Long - ROUND W/ BASE MT

0.195" plunger with locking device at tip

E120-59

Addressograph Multigraph P/N E120-59 - Rare - an't find these anymore

Vinatge New Old Stock

Learn More

GUARDIAN - A420-062076 Solenoid, DC.

Operation: Pull.

Load force: >16 oz.

Stroke length: 0.3.

Duty cycle: Continuous.

Coil: 115VDC 0.045A 3200 Ohms.

Plunger config: Round w/slot & hole.

Mech: 2 4-40 Holes in base.

Body dim: 0.75"x0.75"x1.6".

Weight: 0.1 lbs.

Connection: 6" 24 ga leads.

Learn More

DECCO DETROIT COIL COMPANY - 9-115 - Laminated Pull Solenoid

Built for heavy duty applications and long service life

Solenoid, AC.

Operation: Pull.

Load force: >32 oz.

Stroke length: 0.6.

Duty cycle: Continuous.

Coil: 115VAC 2A 61 Ohms.

Plunger config: Rectangular w/hole.

Body dim: 2"x1.2"x2.4".

Weight: 0.58 lbs.

Connection: 8" 16AWG leads w/hook lugs.

Learn More

Solenoid, AC. Operation: pull. Load force: >32 oz. Stroke length: 0.6. Duty cycle: continuous. Coil: 115VAC 0.25A 87 Ohms. Plunger config: rectangular w/hole. Mech: 4 holes in base. Body dim: 1.2"x1.5"x2.5" . Weight: 0.43 lbs. Connection: 12" 20 ga leads. Note: Alt P/N: 9-314MS. Learn More

This solenoid has a T-shaped laminated design plunger and laminated steel frame. It has the unique ability to hold an exceptionally heavy load with a minium of humming or vibration. To minimize the humming or chattering of most solenoids, the contact surfaces of the laminated frame and plunger are machined to provide a smooth and flush contact surface.

Laminate solenoids consist of a laminated steel frame, a coil, and a movable plunger in the center of the coil. When the coil is energized the plunger is pulled into the coil

E120-87 - Linear Solenoid,

AC. Operation: Pull.

Load force: >48 oz.

Stroke length: 0.75"

Duty cycle: Continuous.

Coil: 115VAC 0.24A 475 Ohms.

Plunger Config: Rectangular w/u-brkt.

Mech: 8 holes on base.

Body dim: 1.2"x1.5"x2.5".

Connection: solder lugs on coil.

Weight: 0.4 lbs.

New Old Stock

 

Learn More

RBM CONTROLS/ESSEX - 70-120226-5,  PS50053-5-2 High Current Starter Solenoid Relay

36VDC METAL HI CURRECT SOLENOID RELAY (SPST N.O.)

Estimating 200Amps Solenoid 

Two Large Copper Contactor Terminals: 5/16-24,

Single Coil Terminal: 10/32, Case Ground.

Flat Flange mounting with two large slots 2.1" apart.

Extra heavy duty corrosion resistant steel body.

Marked 70-120226-5 RFE looks in good condition

As Removed - Used

 

Learn More

30VDC SOLENOID Heavy - 1.5"OD cylindrical - threaded plunger 0.61"OD - two "wings" for mounting (undrilled) 2-pin MS connector - Aircraft surplus - NEW Old Stock Learn More

MAGNET SCHULTZ OF AMERICA - S-06675 - NEW

24VDC, 11.0 Watt, Pull Solenoid Box Frame Solenoid

holding Force: 198 Oz

Maximum 5 oz at 0.5 inches stroke, Minimum 48 oz at 0.12 inch

52-0hm Coil - Continuous Duty

Box Frame Body: 1.622" x 1.441" x 1.752".

Additional Information: https://magnet-schultzamerica.com

Learn More

GUARDIAN - TP4X16-I-24D Cylinrical Solenoid, DC.

Operation: Push.

Load Force: >6 oz. (6/116 N)

Holding Force: 22 Oz

Stroke length: 1.

Duty cycle: Intermittent.

Coil: 24VDC,  0.330 Amp, 72.7 Ohm.

Coil power: 8.3 Watt

Plunger config: round with 0.062" D push pin.

Mech: 3/8-32 thrd col w/brkt.

Body dim: 0.5"D x 2.023" long, overall 3.714" including internal pin. (12.7 X 51 mm) 

Weight: 0.1 lbs.

Connection: with 8", 24 AWG leads.

P/N: A420-066086-00

Learn More

GUARDIAN - A420-062396-00 Solenoid, AC.

Operation: Push.

Load force: >16 oz.

Stroke Length: 0.3.

Duty cycle: Intermittant.

Coil: 115VAC 0.3A 63 Ohms.

Plunger Config: Round w/.75" knob.

Mech: 4 8-32 holes.

Body Dimensions: 1.65"x1.45"x2.3".

Weight: 0.55 lbs.

Connection: 5" 18 ga. leads.

Learn More

GUARDIAN - A420-060761-00 Solenoid, DC.

Operation: open/close.

Load force: >48 oz.

Stroke length: 1.

Duty cycle: continuous.

Coil: 170VDC 0.109A 1560 Ohms.

Plunger config: round w/slot & hole.

Mech: 2 pairs of side holes.

Body dim: 0.95"x1.2"x1.95".

Weight: 0.27 lbs.

Connection: 6" 22 ga leads.

Note: Alt P/N: E120-54.

Learn More

GUARDIAN - A420-059001-00 Solenoid 

24VDC @ 250ma

Dimensions: 1-3/4" long x 1/2" x 1/4 plungerwith 1" pull @ 24VDC .

Unit measures 1-1/2" high x 1-3/4" deep x 1-1/8" wide.

Unit can be flush mounted by any of eight 3/16" holes.

New Old Stock

Learn More

Unidentified MFG - 109-1295 - Electric Actuator. Solenoid

3-wire.

Body Dimensions: 1.15" OD x 0.83" High

Overall Dimensions: 1.160" Diameter x 0.830" High, Plus Spring Actuator.

New Old Stock

Learn More

MAGNET SCHULTZ OF AMERICA - MSA- 06244 - S-0-6244 - R24X13 - Solenoid, DC.

Intermittent Duty Cycle

24 VDC Pull

14 Ohm Coil, 100 ounce.

Maximum 118.7 oz at .025 in., Minimum 92.5 oz at .025 in.

Primary Function Pull, Intermittent Duty Cycle.

Package: Cylindrical 1.5" OD x 2" Long.

Threaded Bushing Panel Mount.

Note: REGDON 24VDC-ID.

Proudly Made in USA

Learn More

GUARDIAN - A420-064182-00 Solenoid, DC.

Operation: Pull in Against Spring Load Force: >16 oz.

Stroke Length: 0.5 Inch.

Duty cycle: Continuous.

Configuration: D-Frame

Coil: 24VDC, 0.3 Amp, 77 Ohms.

Plunger Configuration: round w/ slot & hole.

Connection: Polarized Coil w/internal diode, narrow pin (+).

Special Features: Heavy duty

Mounting Mechanical: 2 6-32 holes in base.

Overall Body Dimensions: 1.4"x0.85"x2.75".

Weight: 0.2 lbs.

Learn More

GUARDIAN - A420-066410-00 Solenoid, DC.

Operation: Pull.

Load force: >6 oz.

Stroke length: 0.15.

Duty cycle: Intermittant.

Coil: 6VDC 0.37A 16 Ohms.

Plunger Config: Round w/slot head .

Mech: PCB mount.

Body dim: 0.5"x.375"x1.

Weight: 0.01 lbs.

Connection: PCB termination pins.

Vinatge New Old Stock

Learn More

Solenoid 24VDC "Bomb Arming B-47" 15.2AMP 2-ohm coil 3380-079250260 in original Airforce box for Boeing in Wichita Kansas 2.3"D x3.8"H mounts with four studs 2.0" spacing, about 0.4" travel 0.26"D shaft Learn More

MAGNET SCHULTZ OF AMERICA - S-09562 - Tubular Solenoid, DC. Push,

24VDC

Continuous Duty Cycle

Coil Resistance:105 ohm

Force: 35 ounce at 0.03 inches.

Dimensions: 1.0" OD x 2.4" long excluding 3.95" long rod.

Learn More

MAGNET SCHULTZ OF AMERICA MSA - S-06697 Solenoid, DC.

Operation: Pull.

Load force: >48 oz. 

Stroke length: 1.

Duty Cycle: Continuous.

Coil: 110VDC 0.114A 1060 Ohms.

Plunger config: Round w/slot & hole.

Mech: 4 8-32 holes on 2 sides.

Body Diameter: 1.4"x1.6"x4" .

Weight: 0.8 lbs.

Connection: 3/16" male spades.

Learn More