Timers & Counters

ACTION INSTRUMENTS INC - V437-2000-1.

Pulse input rate/totalizer.

Flow, rate, speed indication, totalization, peak detect and alarming, including preset tracking for container fill applications.

Pulse or square wave, TTL, open collector or contact closure, 125mVpp to 120V amplitudes.

Visipak - Action's VisiPak indicators are a reliable, cost effective solution for displaying virtually any sensor or process variable. All VisiPak indicators have NEMA 4 or higher front panel ratings and a variety of agency approvals. 

Field Configurable Input

NEMA 4X Front Panel

4 Visual Alarm Points with Front Panel LED Status

Wide Ranging Display

Frequency Input: 0/999999 display.Pulse Input Rate/Totalizer

Isolated 4-20mA output (external power needed) for analog indicators.

Factory New complete with manufactures instruction manual.

Proudly Made in USA

Learn More

TERMINAL BLOCK ADAPTER MODULE for MITE-series Learn More

Counter. 4 Digit x 8 position, assembly. The coils pull in between 8-15VDC. Metal frame/Steel bracket 14" long x 1-1/8"wide x 2-1/2" high. Learn More

Solid State Delay On Make Timing Module Learn More

SSAC - TSD2425 - Solid State Digi-Timer

Timing Module Interval (Single Pulse on Operate)

UPC:  804325042055

Brand: SSAC

Subcategory: Time Delay

Series: TSD2

Mode of Operation: Interval

Timing Range: 10 Minutes~1000 Minutes

Coil Voltage: 120 VAC

Mounting Type: Surface

Contact Rating (A): 1 Amps

Contacts: 1NO

Termination:0.250 in Flat Blade

Time Range Adjustment: Remote

Max Time: 1000 Minutes

Time Tolerance: 1 Percent

Approvals: CSA; CE; UL

H x W x D:2 in x 2 in x 1.21 in

Net Weight:2.4 oz

120VAC External Adjust

Learn More

REDINGTON - V8-4816 - Counter. 6 Digit, 24VDC.

Electromechanical. 1200 Counts/Min.

Mount: Panel, 4 hole.

22-2C Wire.

Dimensions: 1.63" wide x 1.0" high x 2.25" deep plus mount flange 1.625" wide x 2.36" high x 0.20" thick.

New Old Stock

Learn More

The ST71A is a plug-in timer which provides a 7, 10, 30, 60, or 90 second fixed prepurge timer period at the start of each R4795 cycle.PLUG-IN PURGE TIMER FIXED 7 SEC. TIMING FOR USE WITH R4795.(CIRCUIT BOARD) WITH SPEC'S. Learn More

Replacement Drive for Chart Recorders - Spring Wound - with KEY1 REV/DAY - Seven (7) day wind - 24 Hour Chart, 4.5"round x 3"deep overall - Impossible to find today! Learn More

EAGLE SIGNAL / DANAHER - 191-11B601 B82 - 0-8 HOUR TIMER

For over 70 years, Eagle Signal has been the leading supplier of timer solutions for a range of industrial applications all over the world.The Model 191 is a push-button start, motor driven timer with cycle progress pointer, double make-double break snap action switch and is used to energize a load for a preset time period. The pushbutton is located in the center of the time set pointer knob on the panel mounted dial. When depressed momentarily, a mechanical latch and switch is engaged, starting the motor and timing period. After completion of timing, switch 3 and 4 open, 1 and 2 close, motor stops, and timer resets to setpoint. Timer is now ready for another timing operation.

Voltage: 120/240VAC 60Hz, 1/2hP 125VAC, 3/4HP 250VAC 

Current Rating: 10A

Repeat Accuracy: 1.5% of Full Scale

Termination: Motor - Loose Leads, 20 Ga., 6" long stripped 5/8"

Termination Switch: .188 x .250 x .020 Quick Connect Tabs

LR27967

PUSH BUTTON AUTO-RESET TIMERDANAHER 

GW-EAGLE SIGNAL INDUSTRIAL CONTROLS

Approvals: UL, CSA

Made in USA

Manufacturer's Specification In Package.

New Old Stock

Learn More

0-999999 Second Tme Totalizer - NEW - panel mount 120v/60 (277.78 hours)Panel Mount - with spex Learn More

0-15 SECOND PANEL MOUNT RESET TIMER - 120VAC 60Hz - NEW DANAHER CONTROLS Reverse Clutch = OFF Delay, WITH SPEC SHEET IN BOX Learn More

MiniFlex adjustable timer. 0.35 - 3.5 Seconds 120VAC DPDT-10Amp. Top Knob Adjust Internal Timing - One Shot (Momentary Start) 1/8-DIN with instructions. Learn More

Hardware. H Bracket for mechanical counters. Such as 5-H-81 type counter. Note: Durant/Eaton. Learn More

240V 50-or-60HZ RESET TIMER 0-60 Seconds MINIMUM SETTING - 3% OF FULL SCALE - FM(FACTORY MUTAL) APPROVED - SYNCHRONOUS MOTOR DRIVEN 10Amp Contacts - 9 POSITION TERMINAL BLOCK Learn More

8 Digit Resetable Counter.One input for voltage counting level of 48-240vac and or one input for 5 to 50 V AC/DC. Counting speed is 40 Hz max. For sinking or sourcing use 5-50vdc.Unit has one lithium battery inside which says should last up to 8 years. Learn More

Timer, mechanical. 0-60 Second. Type: NO 115VAC 10Amp, 230VAC 5Amp. Dimensions: 3.5 x 4 x 3" deep. Contacts: 10 terminal/lugs on top. Rear of unit has 4 operating diagrams; Before start, During cycle, End of cycle and Switch operation. Note: Manufacture: Automatic Timing and Controls Inc. Made in the USA. Learn More

Timer, solid state. Timing range: 0/1 to 10 Seconds. Pilot duty: 115VAC 50/60Hz, 150VAC 6Amp. Note: NIB. Alt P/N: 24-160-311-701. Learn More

Hourmeter. Digital. Totalizing counter. Mount: Panel. Used/Removed from equipment. In manufactures box with instructions. Learn More

MarkTime - M H Rhodes - 78105 - Mechanical Timer Switch.

Mechanical Timer is an easy to operate spring-wound timer with a 60-minute range at one-minute increments. The timed device plugs into the back of the timer, and the dial is set to the timing interval. Power cuts off and the device stops timing when the dial returns to 0. The timer is housed in a black bakelite case and features a satin chrome face with black numerals and easy-to-set indicator dial. 

Another Certified Professional MarkTime Product.

0-60 Minutes. 13Amp 125VAC only, 10Amp 125 CAVT. Two Wire.

Cat No 78100.

Deluxe Pointer Knob.

Approximate Dimensions: 3.05" Wide X 3.30" Tall X 3.60" Deep

Factory Box Measures: 3.5" X 3.90" X 5.10"

Note: Turn Past 10 - Then Set Time.

UL CSA Approved.

Applications: Photography, Laboratory, Industrial 

Replaced by Alternate Part Number R11665 & Global Troxler Model TSA-191 @ ($100.00+) 

Industrial Quality - Vintage - Never Used - New Old Stock

Made in USA

Learn More

Digital Programable Controller. Timer. Part Number 375101, 10Amp 120VAC 50/60Hz 1100 watt. Extech Bostom MA. Manuf in Taiwan. S/N 8590/6C86. Learn More

E4B712D Counter.

7 Digit, 12VDC 1.92 watt.

2-Wire.

Pulse length: 35 ms min.

Base mount, flange.

Dimensions: 1.565" wide x 0.824" high x 1.53*" deep.

Mount flange: 1.002" wide x 1.371" wide with a 3 hole mount.

Note: Miniature, plastic.

Proudly Made in the USA

Learn More

ENM Company - E2B54DC05 Counter.

5 Digit non-resettable.

Record to 99,999.

24VAC 50/60Hz 72VA 6 watts.

600/Counts per minute.

Mount: Panel. 2 Wire.

Enclosed, steel.

Dimensions: 1.721" long x 1.190" high x 2.1" deep, plus mount flange with 2" mount centers.

Made in the USA. 

New Old Stock

Learn More

Counter. 120VAC 6-Digit electric, with front panel pushbutton reset. Up to 1,000 counts / minute. Count coil may be "left on indefinitely without damage." Avoid connecting AC (rectified) counters in parallel with highly inductive relays, solenoids, motors, etc or use surge protection. 3.5W UL CSA. Front panel cutout: 2.10"W x 1.13"H. P/N: 41322406. 4 oz. New in box. Learn More