I/O Relay Module

Relay, I/O. 4-channel DC Input 10-32 VDC, 5 VDC Logic. Digital Module. Learn More

Relays, SSR. Solid state input module, quad, 5-32VDC input, maximum output voltage, 30VDC. Maximum output current 50mA. Inputs and outputs are grouped in pairs and not totally isolated. Plugs into standard quad-pak 14-pin I/O board positions. Learn More

Relays, A/D I/O. Signal input 4-20mA. 11-pin plug in module. Factory calibrated.Number of analog inputs: 1. Number of digital outputs: 1. Resolution: 12 bits. Module Input Impedance: 414 Ohms. Over/under current range:3 to 35 mA. Loop supply 28VDC nominal. Accuracy:16 �A Learn More

Relay, I/O SSR. Nominal input: 120VAC. Minimum input: 90VAC. Maximum input: 140VAC. Logic: 5VDC. Current: 10Amp. Dropout current: 2.5Amp. Red led indicator. Package: 5 Pin. Made in the USA. Learn More

New Relay Modules 12-140Vac , 3Amp out , 5V logic Made in the USA Learn More

Relay, SSR. I/O Module. 5VDC Logic. 50mA 30VDC out. 3.3-32VDC in. Note: Miniature module for M-series mounting boards. F= fast switching 47-63Hz. Listed: UL/CSA. Learn More

SSR NO DC Output, 5-60 VDC, 15 VDC LogicThe ODC15 output module is used for controlling or switching DC loads of 5-60 VDC. Each module provides 4000 volts (transient) of optical isolation between the field devices and the control logic. Learn More

5VDC Logic Control ~ AC Output Module, Signal Input:4 to 8VDC, Number of Outputs:1, Digital Outputs:1, Input Frequency: 45~65Hz, Contacts:SPST-NC, Output 3Amps. - 5Volt logic Output 120VAC 3Amp pcb/socket mount Learn More

Mounting boards for 4 - Input/Output modules Ind manuf bx's. Learn More

NEW MODULE I/O RELAYS Learn More

1-5 VDC ANALOG INPUT MODULE for EPTAK 200OLD LIST $193.00 Learn More

Relay, SSR, I/O Module. In:10~48VAC/DC Switch:50mA 30VDC "N"=Noise Immunity per NEMA ICS 2-230 - Plug into Mounting Boards for thinner 0.6" Modules - UL Recognized (E46203) / CSA Certified (38595)http://www.crouzet-usa.com/catalog/gordos/standard_input.pdf Learn More

3A 60VDC OUT 3.0-8VDC IN SSR F=Fast Switching 0.6"thin Output Module Learn More

Relay, SSR, I/O Module. Input: 5V logic or 3.2-32VDC. Load: 50mA 30VDC. 5-pin In-line. Miniature modules. Learn More

Relay. Contactor: 60VDC 3A. Coil: 5VDC. Connection: 4-pin slim module. Electrical conf: SPST NO. Optically isolated. Learn More

Relay, I/O. Solid state relay. 10-32VDC 5VDC logic. Number of digital inputs: 1. Signal input type: 10 to 32VDC. Number of outputs: 1. More info: http://www.opto22.com/documents/0253_G4_Digital_DC_Inputs_data_sheet.pdf Learn More

Relay board, I/O. 16 Position/Relay Sockets. Generation 4. 16-Channel Rack with 50-pin Header and 32-pin terminal board for wires. Used/Removed from newer equipment. Learn More

Relay, I/O. Output: 3Amp 5-60VDC. Control: 24VDC logic. The ODC24 output module is used for controlling or switching DC loads of 5-60 VDC. Each module provides 4000 volts (transient) of optical isolation between the field devices and the control logic. Learn More

SS Relay module RFE/Used Learn More

Relay, SSR. Control: 3-8VDC (10VDC max) (Input 8Amp max). Load: 20Amp 90-280VAC 400Hz (output 0.1Amp min). Case. Encapsulated module. Dimensions: 2.003" sqaure x 1.224" high. Contacts: screw. Note: solid state. New older stock. Learn More

Relay, power. Contact Ratings: 11mAdc typical. Supply voltage: 5V. Connections: 5 Pin. Mech Mtg: Panel mount. Note: Dry contact output module. G-Series. More info: http://www.brentek.com/pdfs/DRY5_G_SM_M_Series.pdf Learn More

Relay, SSR. 15VDC 16mA Logic out. 10-36VDC in. Packaging: Module I/O. Learn More

Relay mounting rack/card. Accepts 24 Grayhill or standard I/O modules. With edge connector and 24 [ 0~23 } module sockets and 48 position terminal boards connections. Learn More

MODULE 10-28VDC INPUT 4.5-30VDC OUTPUT Learn More