I/O Relay Module

SSR I/O Module Learn More

Relay, SSR. 15VDC Logic. 4-16VDC 23mA In. Packaging: I/O Module. Used/Removed from equipment. Learn More

Relay, SSR. 15VDC Logic out. 10-32 VDC or 12-32 VAC. Packaging: Module I/O. Used/Removed from equipment Learn More

Relay, I/O rack. For Use With:G4 I/O modules, PCB Type:24 Channel I/O Rack. Dimensions: 7.5 x 6.25". Thickness: 2.32". Learn More

OPTO 22 - IDC5Q Relay.

I/O. 4-channel

12-32 VAC, DC Input 10-32 VDC

5 VDC Logic

Operating Temperature: -30 C to 70 C

Mounting Style: PC Board

Digital Module.

Applications: Limit Switches, Photoelectric Switches, Prooxmity Switches, Push Buttons, Selector Switches.

Learn More

8-CH I/O MODULE RACK Learn More

32 CH DIGITAL BRAIN BOARD - PAMUX Learn More

I/O Modules 5VDC input 3A 3-60VDC out Red SS Relay 1 Form A (SPST NO) 1-11/16" wide x 5/8" deep x 1-1/4"high Learn More

OPTO 22 - G4ODC5 Relay, I/O.

Solid state relay.

Quad 5-60VDC, 5V logic.

Number of digital outputs: 1.

Signal input type: 4 to 8VDC.

Output current: 3Amp.

Supply voltage max: 8VDC.

Supply voltage min: 4VDC.

Used/removed from equipment.

More info: http://documents.opto22.com/0254_G4_Digital_DC_Outputs_data_sheet.pdf

Learn More

I/O Module 12-140VAC Output -=- 5VDC Logic-input 0.6" RFE/Used Learn More

I/O Module 12-140VAC Output -=- 5VDC Logic-input 0.6" RFE/Used Learn More

Normally-Open PC-Mount SSR, 1-CHANNEL, sip module Learn More

Relay, I/O. 120VAC. Package: module. Learn More

Motorola - MRF911 Transistor, NPN.

This Silicon wideband NPN 7.5GHz transistor is suited for antenna and amplifier applications in the VHF and UHF frequency ranges.

Max voltage: 12V.

Max current: 40mA.

Dissipation: 400mW.

Package: Case 317-01 star.

Note: RF amplifier. UHF Microwave. Gain 5GHz 2.5dB.

Genuine Vintage Motorola MRF911 - New Old Stock

Learn More

SSR 5-30VDC INPUT TO 5VDC OUT MODULE Learn More

NEW 1A 250VDC OUT, 18-32VDC IN 4-PIN RELAYShttp://www.crouzet-usa.com/catalog/gordos/m_output_modules.pdf Learn More

Relay, SSR, I/O Module. N.O. 24VDC Logic Out 30VDC 50ma In 90-140VAC 60hx I/O module 28KR resistance 5-Pin PCB mt.http://www.crouzet-usa.com/catalog/gordos/m_input_modules.pdf Learn More

GORDOS - IDC5 - SSR I/O Module

Status: DISCONTINUED BY MANUFACTURER

I/O MODULE - SOLID STATE RELAYS

DR SERIES

4-32VDC

50MA OUTPUT

5VDC SUPPLY

34MA INPUT

DIGITAL

4000V ISOLATION

1 CHANNEL

1 I/O PORT

1MS TIME REPSONSE

-30 TO 80 DEGREE C

DIN- RAIL MOUNT

Used Removed from Equipment

Learn More

GRAYHILL - 70-IDC5 -  SSR 3-32v 50ma

Relay SSR 18mA 32V DC-IN 0.05A 50V DC-OUT 5-Pin

Note: Removed from Equipment

Learn More

I/O Module 12-140VAC Output -=- 5VDC Logic-input 0.6" RFE/Used Learn More

GORDOS/CROUZET - M-ODC5MA - M-Series Output Module

Output: 3A 200VDC

Input: 3-8VDC IN SSR

Mounting Type: Through Hole

New Old Stock

Proudly Made in USA

Learn More

Relay, SSR. I/O module. Control 3Amp 240VAC. Output: 3-8VDC. Learn More

CRYDOM - PB-4 - I/O Module for Standard I/O Modules, 4 Channel Screw Terminals. • Screw terminal barrier block for logic connections • Screw terminal barrier block for load connections • Resident pull-up resistors • 5 amp field-replaceable fuses (LITTELFUSE #251005 or equivalent) • LEDs indicate logic status • All even-numbered logic connections are logic ground • Input and output modules accepted interchangeably • Operate with 5, 15 or 24 volt logic supplies • Captive-screw retaining system for standard-size modulesI/O Mounting board. For standard I/O module relays. Dimensions: 4.5” X 3.5” X 2.2” High (wiith Modules Mounted) More info: http://www.crydom.com/en/products/catalog/p_b4.pdf Learn More

I/O Mounting board. For standard I/O module relays. More info: http://www.crydom.com/en/products/catalog/p_b4.pdf Learn More