Overload Relay

Schneider Electric - Square D - 750-D150-G1 - ETO123R Relay, Overload.

Dashpot Magnetic Current Relay, Manual Rreset.

Form HR 1

Class-9055, type-ETO123R form-HRY-35. Type 'E' overload relay, dashpot, heavy current.

"Remove dashpot from relay, leaving plunger and piston assembly in dashpot.

Fill 2/3 full with class 9055, Type R11 dashpot oil, to insure proper operation use. Only this special silicon oil." (not included) About 6 x 4 x 6"high.

New Old Stock

GENERAL ELECTRIC - 12PJC14F5 - Instantaneous Current Relay

4-Pole (2NC & 2NO)= DPDT - HAND RESET - "Relay Calibration: 10/16/25/40" Window on top of the Black Bakelite case 5"L x 2.4"W x 4" above the Control Panel it mounts to with the (12) 1.5" long screws. Operating Coil:25 AMP:DC 25/60 CY. Fully enclosed. #3 packed.

Current Rating: .6 Amp

Maximum Amperage: 60 A

Type: PJC

Current Type: DC

Applications: Commercial, Control Equipment Panels 

Square D - 8501 Type HO-60 - Series B Latching Relay, 120VAC Coil, 6 Pole, NEMA A600, New.

Class 8501 Type HO-60

Coil Rating: 120VAC @ 60Hz / 110VAS @ 50Hz.

Conatct Material: Silver

6 Normally Open Contacts can easily be changed from Normally Open to Normally Closed

AC Voltage 120-600, Make: 7200VA, Break: 720VA, Continuous: 10A

Max. Carry Amperes: 15

Mount: Panel Mount

80030

New Old Stock

Listed: UL/CSA.

Proudly Made in USA

Square D - 8501 Type H1R - Series A Latching Relay, 120VAC, 8 Pole, NEMA A600.

Class 8501 Type H1-R

Coil Rating: 120VAC @ 60Hz / 110VAS @ 50Hz.

Conatct Material: Silver

8 Normally Open Contacts can easily be changed from Normally Open to Normally Closed

120 to600V, Make 7200VA, Break 720VA, Continuous: 10A

Mount: Panel Mount

79302

New Old Stock

Listed: UL/CSA.

Proudly Made in USA

Square D - 9065SEO5 Thermal Overload Relay.

Status: Discontinued

Melting Alloy, 600V 26Amp.

Nema Size 1, Three Pole.

Series A/Class 9065/Type S.

Open Frame.

Factory New

Listed: UL/CSA.

Square D - 9065TF22 - Relay, Thermal Overload. Series A.

Square D by Schnieder Electric

Status: Discontinued

Current: 22-31 Amps

3 Pole, Class 10

New Old Stock

Made in Germany

Square D - 9065TE8 - Relay, Thermal Overload. Series A.

Square D by Schneider Electric

Status: Discontinued

Current: 8-11.5 Amps

Termination: 4 Blade 

New Old Stock 

Square D - 9065TE21 - Relay, Overload.

Thermal Overload Relay 16-21AMP

Series A.

Square D - 9065TE16 - Relay, Thermal Overload.

Square D by Schneider Electric

Status: Discontinued

Current: 16-21Amp

New Old Stock

Square D - 9065TD3.7 - Relay, Thermal Overload.

Square D by Schneider ELectric

Status: Discontinued

3.7 - 5.5 Amps

660 VAC

Type TD/TE

New Old Stock

Square D - 9065TD1.2 - Relay, Thermal Overload. Series A.

Status: Discontinued

Square D by Schneider Electric

1.2 - 1.8 Amp, 3 Pole, 660 VAC

New Old Stock

Alternates: 9065TDI.2

Made in USA

Allen Bradley - AB - 800T-XD1 - Auxiliary Contacts Block.

Shallow Block

1 Normally Open

600V.

Series D.

Note: Allen Bradley is now Rockwell Automation

UPS 10781180697248

Approvals: UL, CSA, CE

ALLIS-CHALMERS - 3ZA-4041-8AH00 - Relay, Overload.

Input: AC.

Contact Ratings: 1.2 to 1.8Amp.

Coil Voltage: 600VAC.

Note: Fuse main circuit 10Amp.

Aux circuit 6Amp max.

New Old Stock

Square D - B1.45 - Overload Relay Thermal Unit

B1.45, Square D, B Series, thermal overload submotor control, B B, rated for 1.03-1.14 amps, B1.45 suitable for use with thermal overload relays, magnetic motor starters & motor controls

Range of Product: B

Thermal Overload Type: Melting Alloy

Motor Tripping Class: 20

In Manufacturers Packaging

EATON - CUTLER-HAMMER - Allis Chalmers - H1046 - H1046 - Heater Coil.

Overload Thermal Heating Element for Adjustable Overload Relay.

Enclosure Type: NEMA 00/0/1/1.5/3/4

UPC:  782113212814

Full Load Amps. Minimum: 28.8

Full Load amps. Maximum: 36.7

Brand: Cutler Hammer, Division of Eaton Corp

Item Category: Heater Coil

H x W x D:.8 in x 1.3 in x 2.1 in

Gross Weight:.48 OZ

New Old Stock

Note: Allis Chalmers was the original Manufacturer subsequently acquired by Cuttler Hammer now a Division of Eaton.

Heating element. For overload relays/contactors. 14.90 - 23.3Amp. Note: Maybe replaced with equal by Allis-Chalmers.

EATON- CUTTLER HAMMER - ALLIS-CHALMERS - FH72 - 25-202-555-872 - Heater Coil. Overload Thermal Heating Element.

Allis Chalmers was the original manufacturer and acquired by Cuttler Hammer a Division of Eaton.

Proudly Made in USA

EATON - CUTTLER HAMMER - ALLIS-CHALMERS - 1236 - H1236 - Heater Coil, Overload Thermal Heating Element.

Status: Discontinued

1236 Heater.

Manual Starter Oberload Relay Heater Coil.

Allis Chalmers was the original Manufacturer acquired by Duttler Hammer a Division of Eaton.

SIEMENS ALLIS Industrial Controls - FH34 - 25-107-671-034 - Heater Coil.

Overload Thermal Heating Element. 

The Thermal Overload Relay Heater are for use on Motor Starter (WYLE/SIEMENS)

EATON - CUTLER-HAMMER - Allis Chalmers - FH08 - 25-202-555-8 - Heater Coil.

Thermal Unit, Full Load Amps 0.46 to 0.50, For Use With Eaton B100 Series Manual Motor Starter (B100M0C, B100M1C, B100S0C, B100S1C, B100W0C, B100W1C, B100U0C, B100U1C, B100J0C, B100J1C, B100M0CA, B100M1CA, B100S0CA, B100S1CA), Sensing Method Bimetallic

UPC #78667862911

Technical compatibility with:

A200 series Size 0 overload Relays

A200 series Size 1 overload Relays

A200 series Size 2 overload Relays

New Old Stock

Note: Allis Chalmers was the original Manufacturer subsequently acquired by Cuttler Hammer a Division of Eaton.