Solid State Relay

OPTO 22 - 240D25-40 - Relay, solid state.

Coil: 3-32VDC or TTL.

Contact ratings: 25A at 240VAC.

Built-in snubber, zero-voltage switching.

Turn on time of one half cycle. UL/CSA.

The -40 is an extra certification.

Standard 1.75 x 2.25 x 1.17"H with four 1/4" male QC terminals.

Weight: 2.8oz.

Proudly Made in USA

Note: Usde / Removed from Equipment

Learn More

CRYDOM - D2402 - Relays, Solid State Relay, SSR. Output: 240VAC 2.5 Amp Out. Input: 3-32VDC Mount: Panel Mount. New Learn More

Relay, SSR. Control: 3-8VDC (10VDC max) (Input 8Amp max). Load: 20Amp 90-280VAC 400Hz (output 0.1Amp min). Case. Encapsulated module. Dimensions: 2.003" sqaure x 1.224" high. Contacts: screw. Note: solid state. New older stock. Learn More

OPTO 22 - 5136 MP177612677 - Relay, SSR, AC Switching.

The innovative use of room-temperature liquid epoxy encapsulation, coupled with Opto 22’s unique heat-spreader technology, are key to mass producing the world’s most reliable solid state relays.

Status: Discontinued

Input: 5V control.

Output: 10Amp 240VAC.

Connections: (4) 1/4" male QC terminals.

Mech Mtg: Chassis or PCB.

Alternates: Z240D10-7, Z240D10

New Old Stock

Learn More

Gordos/Crouzet - G280A45 - Relay, Solid State.

Load: 25A 240VAC

Control: 90-280VAC.

Learn More

ELECTROL - S2264 - Relays, SSR.

Switches 240VAC 10Amp.

Only 5.5-12VDC-In Control Voltage.

New Stamped "Preconditioned" "E".

Hockey Puck Type

Dimensions: 57mm x 44mm x 35mm tall including screwed on 1/4" and 3/16" male stakons.

Listed: UL/CSA.

Alternates: Opto 22 Z240D10, 240SS10-04, D2410

Learn More

Douglas Randall - AO4A - NC Relay, Solid State Relay.

Load: 120VAC 4Amp.

Input: 90-280VAC.

Package: module/hockey puck.

Made in USA

NSN  5945-01-314-9657

Learn More

Relay, SSR. Output: 240VAC 25Amp. Input: 90-280VAC. Learn More

Relay, SSR. Input: AC. Contacts: SPST (N.O.). Contact Ratings: 480V/25A. Coil Voltage: 90-280VAC. Connections: Screw Terminals. Mech Mount: Panel mount two mounting holes in heatsink base. Size: 1-3/4 x 2-1/4 x 1 inches. Weight: 2 oz. Learn More

Relay, SSR. Input: 3-6VDC. Output: 3Amp 240VAC. I/O module. Note: Double marked OAC5A. Listed: UL/CSA. Learn More

Relay, SSR. Control: 90-280VAC. Load: 20Amp 280VAC 400Hz. Case. Incapsulated module. Dimensions: 2.003" sqaure x 1.224" high. Contacts: screw. Note: solid state. New older stock. Learn More

OPTO 22 - 240D45 - Relay, SSR. 3-32VDC Control.

45Amp, 240VAC, DC Control

Note: Used/Removed from equipment.

Learn More

OPTO 22 - 240D10 - Relay, Solid State.

Power Series relays provide 4000 volts of isolation between input and output, and offer zero-voltage turn-on and zero-current turn-off. They are UL and CSA recognized and are a CE component.

IC, NORMALLY-OPEN PANEL-MOUNT SOLID-STATE RELAY, 1 CHANNEL, M:HL048HD4.4

Input: DC.

Output: 240VAC 10Amp.

Input/control: 3-32VDC.

Connections: Screw Terminals.

Mech Mtg: panel.

Size: 1-3/4" wide x 2-1/4" deep x 7/8" high.

Optical Isolation Input to Output: 4,000 V

Turn-on Time: ½ cycle maximum

Turn-off Time: ½ cycle maximum

Operating Frequency: 25 to 65 Hz (operates at 400 Hz with six times off-state leakage)

Coupling Capacitance Input to Output: 8 pF maximum

DV/DT Off-state: 200 volts per microsecond

DV/DT Commutating: Snubbed for rated current at 0.5 power factor

More info: http://documents.opto22.com/0859_Solid_State_Relays_data_sheet.pdf

Proudly Made in USA

 Used/removed from equipment.

Learn More

CRYDOM - EZ240D12 - Relays, Solid State Relay, SSR. Output: 24 to 280 VAC, 10 Amp Out. Contact Form: 1 Form A (SPST NO) Input: 3-15VDC Temperature: -40 C to 80 C Mount: Panel Mount. New Learn More

Sharp - S212S01F Sharp - S212S01F Relay, SSR for Medium Power Control.

Status: Discontinued

Input: AC.

Contacts: SPST NO.

Contact Ratings: 12Amp.

Coil Voltage: 240VAC.

Output: MOSFET

Relay Contact Form: 1 Form A 

Connections: PCB, 4 Pin Power SIP.

Input 1.2VDC.

Load: 80 ~ 240V.

Dimensions: L 18.5mm X W 5.5mm X H 19.6mm

Learn More

Relay, SSR. Contacts: SPST. Control: 4-32VDC. Output: 25Amp 480-660VAC. Zero voltage switching. Mech Mtg: Din rail. Learn More

Relay, SSR. Control: 3-32VDC. Output: 10Amp 240VAC. Contacts. male 1/4" QC terminals. Note: Used/Removed from equipment. Learn More

Relay, SSR. Input: DC. Contacts: SPST NO. Contact Ratings: 10Amp 240VAC. Input: 3.5 to 15V. Mech Mtg: Panel, chassis. NIB with hardware. Lead free. Rohs compliant.

Learn More