Light Sensor

Photoconductive cell. Vactrols-LED. OptoIsolator = LED & Photoresistor. Maximum On-Ohms Light Adapt: 200 Ohm @ 10mA. Dark Adapt: 1.2K Ohm @ 1mA, 125 Ohm @ 10mA, 75 Ohm @ 40mA. Maximum Decay to 100K: 1500ms. Mount: PCB. Package: 4 axial leads 92 each side. Dimensions: 0.409" long x 0.380" wide x 0.311" high. Learn More

Photodiode/Phototransistor. Red lens. Unknown specifications. Maybe IR? Package: TO-18 gold leads. Learn More

Reflective object sensor. Phototransistor output. 30V 25mA 75mW. Package: 4 Pin molded. New. Learn More

Litetouch switch. Mount: panel. Dimensions: 4-7/8" long x 3" wide x 6-1/8" high plus 3/4" each side for mount (2 hole mount with 2-1/3" centers). Used/Removed from equipment. Learn More

TRI-TRONICS - SDLRF1 - High Resolution High Speed SensorSMARTEYE®, High Gain, Red LED, NPN, F1 Fiberoptic Block.

SUPPLY VOLTAGE: 12 to 24 VDC, Polarity Protected

CURRENT REQUIREMENTS: 75 milliamps (exclusive of load)

OUTPUT TRANSISTORS: (1) NPN and (1) PNP sensor output transistors

Outputs sink or source up to 150 milliamps (current limit)

RESPONSE TIME: High Speed Models

500 microseconds, Very High Speed Models,100 microseconds

High Gain Models, 1.5 milliseconds, LED LIGHT SOURCE:

Options: Infrared= 880nm, Red= 660nm, Blue= 480nm, White= Broadband spectrum. Pulse Modulated

AMBIENT TEMPERATURE:

-40ºC to 70ºC (-40ºF to 158ºF)

RUGGED CONSTRUCTION:

Chemical resistant high impact polycarbonate housing

Waterproof, NEMA 4X, 6P, and IP67 enclosure rating

Conforms to heavy industry grade CE requirements

DIMENSIONS:

Width: 2.715 in (69.0mm), Height: 1.715 in (43.6mm), Depth: .64 in (16.3mm)

MAXIMUM SENSING RANGE:

Retroreflective: up to 20 ft.

Proximity: up to 3 ft.

Fiberoptic Proximity: up to 7 in.

w/o lens / 1 ft. w/lens

Fiberoptic Opposed Mode: up to 16i n.

w/o lens / 20+ft. w/lens

Proudly Made in USA

Learn More

Optoelectronic Module for Reflective Sensing - Optimum reading place 3.8mm in front of device. Batch counters, level indicators, end-of-tape indicators. TIL32GaAs IR LED paired with TIL78 Silicon Phototransistor in molded ABS housing 18mm wide x 15mm.

Learn More

Sensor, reflective detector. One channel transmissive assembly. Learn More

SPECTRONICS - SD5443-4 - SD5443-400 - Phototransistor, NPN.

The phototransistor is a semiconductor device that is able to sense light levels and alter the current flowing between emitter and collector according to the level of light it receives.

The 5443 series Phototransistor consists of an NPN silicon phototransistor mounted in a TO-46 metal can package. The SD5443 configuration has glass lensed cans providing a narrow acceptance angle. The TO-46 packages are ideally suited for operation in hostile environments.

Status: Discontinued

Package: Glass Lensed, Domed Lens

TO-46 Metal Can Gold Body and Leads.

Voltage- Collector Emitter Breakdown: 30 V

Current - Collectors (Max): 16mA

Dark Current Mode: 100.0 nA

Note: Silicon.

Operating Temperature: -55 C to 125 C

Power Dissipation: 0.15 W

Alternates: SD5443-004, OP805. Honeywell SD5443-4

New Old Stock - Rare - Difficult to Find Component

 

Learn More

Photodarlington. Package: Glass Lensed - TO-46. Note: Silicon. Military NSN 5961-00-081-7101, 5205-241. Specification sheet available upon request. Learn More

Photodiode. Package: Glass Lensed - TO-46 gold leads. Note: Silicon. Specification sheet available upon request. Learn More

Photocell. Package: TO-8. Learn More

Photocell. Type4 CdS. Spectral peak: 515nm. 120V AC/DC. 43K Ohm. Package: TO-5. Learn More

Photocell. Package: ceramic. Learn More

Sensor. Reflective detector - skanner. Learn More

Sensor. Scanner fiber optic reflective. Note: Nano-Skan. Learn More

Sensor. Reflective detector - incand. Learn More

Clarostat Honeywell SKAN-A-MATIC - T43008 - LED Modulating Amplifier, Super Pulser

Status: Discontinued

Increased Range

Enhanced Ambient Light Immunity

Two Sensitivity Ranges

Relay or Open Collector Output

Total Photoelectric Control

115 VAC Input

Phase and Sensitivity Trimpot Adjustments

Two LEDs Indicating

D2 and D1 12-pin Rectangular Plug-In

Output: Transistor, Mode: DARK Energize 

Compatibility with Sensors: An R43 or T43 Series control can operate any LED thrubeam pair or skanner except the S111, S20, S22 and S27 Series skanners. A 100 mA LED can be wired directly across terminals 11 and 12. Others require an external 1/4 W resistor between the blue (+) lead and terminal 12 . For a 60 mA LED use a 6.8 ohm
resistor; for a 40 mA LED, use a 27 ohm resistor. Both a 6.8 ohm and 27 ohm resistor are included with each R43 or T43 Series control. These controls should not be used to operate an incandescent lamp device.

Applications: Penetrate dusty atmosphere, Increase operating distance, Rejest ambient light, and sense single vs multiple layers

New Old Stock

Made in USA

Learn More

Clarostat Honeywell SKAN-A-MATIC - R40100 - Amplifier Relay with Power Supply.

Status: Discontinued

Complete photoelectric control
■ Open collector, relay, or solid state relay output
■ Output indicator LED
■ 15 turn sensitivity adjustment
■ Regulated DC power supply
■ May be wired LIGHT or DARK energize

115VAC input.

5 Amp Relay

11 Pin Plug-in Module. 

Operates with one reflective skanner or thrubeam pair, Not supplied.

Note: Used Removd from Equipment

Made in USA

 

Learn More

Sensor, photologic. Plastic package. Note: Factory new parts. Specification sheet can be found at www.alldatasheet.com Learn More

Sensor, photologic. Open collector. Plastic package. Note: Factory new parts. Yellow dot. Specification sheet can be found at www.alldatasheet.com Learn More

Sensor, photologic. Open collector. Plastic package. Note: Factory new parts. Specification sheet can be found at www.alldatasheet.com Learn More

REFLECTIVE OBJECT SENSOR Learn More

Side-viewing optical sensor. Case: TO-92 type, three leads. No other info avail. Learn More

Side-viewing optical sensor. Case: TO-92 type, three leads. No other info avail. Learn More