Light Sensor

EATON CUTLER HAMMER OPCON - 1550B-6501 - Photoelectric Fiber Optic Sensor.

Enclosure Material: Body: Noryl, Lens: Nylon

Environmental Rating: NEMA 1,3,4,12,13

Input Voltage: 90-132 Vac

Led Indicators: Red output status

Operating Mode: Fiberoptic, Infrared

Operating Temperature: -40° to 158°F (-40° to 70°C)

Sensor Type: Fiberoptic

Switch Type: Photoelectric

Alt P/N: 106983.

UPC 782113825595

Made in USA 

New

Clarostat Honeywell SKAN-A-MATIC - T43008 - LED Modulating Amplifier, Super Pulser

Status: Discontinued

Increased Range

Enhanced Ambient Light Immunity

Two Sensitivity Ranges

Relay or Open Collector Output

Total Photoelectric Control

115 VAC Input

Phase and Sensitivity Trimpot Adjustments

Two LEDs Indicating

D2 and D1 12-pin Rectangular Plug-In

Output: Transistor, Mode: DARK Energize 

Compatibility with Sensors: An R43 or T43 Series control can operate any LED thrubeam pair or skanner except the S111, S20, S22 and S27 Series skanners. A 100 mA LED can be wired directly across terminals 11 and 12. Others require an external 1/4 W resistor between the blue (+) lead and terminal 12 . For a 60 mA LED use a 6.8 ohm
resistor; for a 40 mA LED, use a 27 ohm resistor. Both a 6.8 ohm and 27 ohm resistor are included with each R43 or T43 Series control. These controls should not be used to operate an incandescent lamp device.

Applications: Penetrate dusty atmosphere, Increase operating distance, Rejest ambient light, and sense single vs multiple layers

New Old Stock

Made in USA

Clarostat Honeywell SKAN-A-MATIC - R40100 - Amplifier Relay with Power Supply.

Status: Discontinued

Complete photoelectric control
■ Open collector, relay, or solid state relay output
■ Output indicator LED
■ 15 turn sensitivity adjustment
■ Regulated DC power supply
■ May be wired LIGHT or DARK energize

115VAC input.

5 Amp Relay

11 Pin Plug-in Module. 

Operates with one reflective skanner or thrubeam pair, Not supplied.

Note: Used Removd from Equipment

Made in USA