Clarostat Honeywell SKAN-A-MATIC - T43008 - LED Modulating Amplifier, Super Pulser 115VAC, New
Clarostat Honeywell SKAN-A-MATIC - T43008 - LED Modulating Amplifier, Super Pulser
Status: Discontinued
Increased Range
Enhanced Ambient Light Immunity
Two Sensitivity Ranges
Relay or Open Collector Output
Total Photoelectric Control
115 VAC Input
Phase and Sensitivity Trimpot Adjustments
Two LEDs Indicating
D2 and D1 12-pin Rectangular Plug-In
Output: Transistor, Mode: DARK Energize
Compatibility with Sensors: An R43 or T43 Series control can operate any LED thrubeam pair or skanner except the S111, S20, S22 and S27 Series skanners. A 100 mA LED can be wired directly across terminals 11 and 12. Others require an external 1/4 W resistor between the blue (+) lead and terminal 12 . For a 60 mA LED use a 6.8 ohm
resistor; for a 40 mA LED, use a 27 ohm resistor. Both a 6.8 ohm and 27 ohm resistor are included with each R43 or T43 Series control. These controls should not be used to operate an incandescent lamp device.
Applications: Penetrate dusty atmosphere, Increase operating distance, Rejest ambient light, and sense single vs multiple layers
New Old Stock
Made in USA
| SKU | 36112 |
|---|---|
| Condition | NOS - NEW OLD SURPLUS |
| Part Number | T43008 |
| Alternative Part Number | x43008 |
Clarostat Honeywell SKAN-A-MATIC - T43008 - LED Modulating Amplifier, Super Pulser
Status: Discontinued
Increased Range
Enhanced Ambient Light Immunity
Two Sensitivity Ranges
Relay or Open Collector Output
Total Photoelectric Control
115 VAC Input
Phase and Sensitivity Trimpot Adjustments
Two LEDs Indicating
D2 and D1 12-pin Rectangular Plug-In
Output: Transistor, Mode: DARK Energize
Compatibility with Sensors: An R43 or T43 Series control can operate any LED thrubeam pair or skanner except the S111, S20, S22 and S27 Series skanners. A 100 mA LED can be wired directly across terminals 11 and 12. Others require an external 1/4 W resistor between the blue (+) lead and terminal 12 . For a 60 mA LED use a 6.8 ohm
resistor; for a 40 mA LED, use a 27 ohm resistor. Both a 6.8 ohm and 27 ohm resistor are included with each R43 or T43 Series control. These controls should not be used to operate an incandescent lamp device.
Applications: Penetrate dusty atmosphere, Increase operating distance, Rejest ambient light, and sense single vs multiple layers
New Old Stock
Made in USA
