SIGNAL TRANSFORMER INC - MPL-12-1296A – Semi-Toroidal Transformer. Dual 13V Primaries, Triple Secondaries 18.6 V and 9.6 V, 24VA
Special Price
$8.98
Regular Price
$18.95
READY TO SHIP - ONLY 238 LEFT IN STOCK!
SKU
132862
SIGNAL TRANSFORMER INC - MPL-12-1296A – Semi-Toroidal Transformer. Dual 13V Primaries, Triple Secondaries 18.6 V and 9.6 V, 24VA
Experience a seamless power conversion with the Signal Transformer MPL-12-1296A, a robust semi-toroidal transformer designed for efficient AC to AC transformation. It boasts a dual 15 VAC primary voltage rating and offers three outlets with two rated at 18.5 VAC @ 216 mA each, and one at 9.6 VSC @ 180 mA, catering to a variety of electrical needs. Ideal for PCB mounting, this transformer is equipped with a pin termination style and is single-phase, ensuring a compact and versatile addition to your power management solutions. Whether you require step-up or step-down functionality, this transformer's conversion function versatility makes it a reliable choice for your electrical and industrial applications.
Signal’s MPL triple output transformer use hum-bucking (Semi-Toroidal) construction that minimizes radiated magnetic fields. These transformers are ideal for critical low-height PC board applications.
Type: Low Profile Semi-Toroidal
Primary: Dual 13 VAC Primaries (Terminals 4+3, 2+1).
Secondaries: Terminals 5+6, and 8+9: 18.6 VAC @ 216mA each, Terminals 7+10: 9.6 VAC @ 180mA.
Mounting: Through Hole
Termination Style: PC Pin or Solder
Dielectric Strength - 1500 Vrms Hipot
Electrostatic shield - not necessary due to split bobbin construction
Reduced magnetic radiation
Insulation System - Class B, 130° C, UL 1446 E66312
Dimensions: 2.5" Long x 2" Wide x 1" Height Above Board.
When used with voltage regulators: Regulator 1 - 5VDC 270mA, Regulator II - 12VDC 85mA 12VA. Flathead PCB mount 10 pin.
Note: All ten terminals are coated with an anti-tarnish coating that disintegrates upon soldering. If you want to just test these transformers, remove the coating by touching with a soldering iron.
Special Custom Built for Gould Instruments P/N 294273 REV.00-1.
Approval: UL and CSA
Made in USA
New
| SKU | 132862 |
|---|---|
| Condition | NS - NEW SURPLUS |
| Part Number | MPL-12-1296A |
| Alternative Part Number | 294273 REV1 LP-12-1296A GOULD INSTRUMENTS |
SIGNAL TRANSFORMER INC - MPL-12-1296A – Semi-Toroidal Transformer. Dual 13V Primaries, Triple Secondaries 18.6 V and 9.6 V, 24VA
Experience a seamless power conversion with the Signal Transformer MPL-12-1296A, a robust semi-toroidal transformer designed for efficient AC to AC transformation. It boasts a dual 15 VAC primary voltage rating and offers three outlets with two rated at 18.5 VAC @ 216 mA each, and one at 9.6 VSC @ 180 mA, catering to a variety of electrical needs. Ideal for PCB mounting, this transformer is equipped with a pin termination style and is single-phase, ensuring a compact and versatile addition to your power management solutions. Whether you require step-up or step-down functionality, this transformer's conversion function versatility makes it a reliable choice for your electrical and industrial applications.
Signal’s MPL triple output transformer use hum-bucking (Semi-Toroidal) construction that minimizes radiated magnetic fields. These transformers are ideal for critical low-height PC board applications.
Type: Low Profile Semi-Toroidal
Primary: Dual 13 VAC Primaries (Terminals 4+3, 2+1).
Secondaries: Terminals 5+6, and 8+9: 18.6 VAC @ 216mA each, Terminals 7+10: 9.6 VAC @ 180mA.
Mounting: Through Hole
Termination Style: PC Pin or Solder
Dielectric Strength - 1500 Vrms Hipot
Electrostatic shield - not necessary due to split bobbin construction
Reduced magnetic radiation
Insulation System - Class B, 130° C, UL 1446 E66312
Dimensions: 2.5" Long x 2" Wide x 1" Height Above Board.
When used with voltage regulators: Regulator 1 - 5VDC 270mA, Regulator II - 12VDC 85mA 12VA. Flathead PCB mount 10 pin.
Note: All ten terminals are coated with an anti-tarnish coating that disintegrates upon soldering. If you want to just test these transformers, remove the coating by touching with a soldering iron.
Special Custom Built for Gould Instruments P/N 294273 REV.00-1.
Approval: UL and CSA
Made in USA
New
