Lenses & Mirrors

18" Ellipse Scan Mirrors, Made for IBM, Very Fragile - Partial Transmission

Learn More

New Right Angle Rear Projections Lens - 4"Round Plastic to 5.5"x 4" RectangularCompact Delta 7T-AC REV. B - 9" x 6" x about 6" overall Learn More

AV Equipment/Video. Lens / TX zoom, fast f1:1.6 C-mount 11-110mm, 6-12VDC input power. Lens size: Large 3" D opening. Electrically operated with cable and connectors. Dimensions: approximately 7.25" L x 4" x 5". Cross: Picker P/N T10-J374-001. Learn More

3.745"W x 3.08"H x 0.60"Thick Six(6) Irregular sides, as measured from the Front Mirror side: 2.23" x 1.14" x 1.85" cross top x 1.5" x 2" down x 3.725" across. Sides and corners are Beveled. Top & Bottom are really flat. Learn More

Lens. Rear projection. Dimensions: 3.75" OD x 3.82" long.

Learn More

Lens and Mirrors. Optical glass Prism 7 x 50 binoc replacements. Learn More

NEW ASPERICAL TV LENS Lens 1/3" AI f/0.75 9mm Standard Aspherical Learn More

Curved First Surface Mirror. Thick slice of GLASS 0.66" thick at the ends, about 0.5" in the middle. 1" X 7" long. Learn More

Plano convex lens. Dimensions: Curved face with a flat top 1.633" and flat botton 2.276" and 3.031" at it's widest x 2.33" high. Learn More

Camera Lens Mount. Image sensor: 1/3" CCD 270,000 (EIA) / 290,000 (CCIR) Pixels. Video format: B/W EIA or CCIR. Operating voltage: DC 9V~12V. Power: 1.5Watt. gama: r=0.45 PCB - Board: 44mm*38mm*1.6t. Learn More

Lens, rear projection. Delta 101A. Size: 3-3/4". Made in the USA. Note: New older stock.

Learn More

Lens. XR-Heliflex f=122mm. Used. Learn More

CCTV Lens HX 3.7mm 1:1.6 CS mount. Motorized with cable to DIN connector with 4 pins. Learn More

Lens aperture. NIB.

Learn More

Copal Shutter Assembly with reflex viewing system. Expertly crafted "Guillotine Copal Shutter" with a special bayonet lens mount measuring about 1.5" ID.Could have been used for a high speed electronic (oscillographic) motioncapture system or vidicon camera front end? The whole assembly is approx 2-1/2" square and has two motors, a 0.60" dia 4-wire stepper w/gear and a Namiki high -eff PM motor, less than 1/2" in dia, which could opperate from a single solar cell. The optics include a single surface mirror with reflex prism. Micro gears and dozens of miniature metric screw, etc. Learn More

Focus adjustment for KOWA 67mm lenses. Manufactured by Peterson Engineering for KOWA. Learn More

OPTICAL Bright-line VIEWFINDER with Rubber Eyepiece and 3 LEDs at bottom of screen - for old CCTV Cameras - has 5" cord with 8-pin plug and Rectangle mounting bracket - 40mm Half-Silvered Dome in front 2"OD x 2.4"L less bracket, etc New-in-box Learn More

Waterhouse stops KOWA 31mm F/ 0.75 Lens Learn More

Waterhouse Stops KOWA 33.1mm for 50mm F/0.75 lens Learn More

Waterhouse Stops KOWA 35.7mm for F/ 0.75 Lens Learn More

Waterhouse Stops KOWA 39.6mm for 50mm F/0.75 lens Learn More

Waterhouse Stops KOWA 43.8mm for 50mm F/ 0.75 Lens Learn More

Focus adjustment for KOWA 50mm lenses. Learn More

KOWA - CL-70U LENS.

1:1.67, 40mm wide smooth barrel back end, threaded at 41.8mm for 18mm - 64mm = 2.52inches Long -- 52.7mm Front end 1:1.67 / 67.1mm. Black.

Learn More