Square D - 2245-S3-G1 - Relay, DC. SPST, Normally Open Contacts, 30Amp 6VDC. Used.
- Buy 10 for $16.98 each and save 15%
Square D - 2245-S3-G1 - Relay, Power.
Electro-magnetic relay with a wire coil, surrounded by an iron core. A path of very low reluctance for the magnetic flux is provided for the movable armature and also the switch point contacts. The movable armature is connected to the yoke which is mechanically connected to the switch point contacts. These parts are safely held with the help of a spring. The spring is used so as to produce an air gap in the circuit when the relay becomes de-energized.
Status: Discontinued Vintage
Industrial Heavy Duty with Resistor
Input: DC.
Contacts: SPST NO.
Contact Ratings: 30Amp.
Coil Voltage: 6VDC.
Mech Mtg: Panel, Open Frame.
Connections: Copper Stud Terminals
Size: Overall with mount 3" long x 3.3" wide x 2.037" high.
Mount Feet Approximately 2.285" on center.
Note: Used/Removed from equipment.
Contacts may have visible oxidation that does not affect Operation.
Can Also be disassembled and used as a Heavy Duty 6 VDC Solenoid.
Simple Durable Design - Proudly Made in USA.
| SKU | 6995 |
|---|---|
| Condition | AR - AS REMOVED |
| Part Number | 2245-S3-G1 |
| Alternative Part Number | R-A015, RFE 924652 |
| Common VDC | 6 - 10VDC |
| Type | 1 Pole |
Square D - 2245-S3-G1 - Relay, Power.
Electro-magnetic relay with a wire coil, surrounded by an iron core. A path of very low reluctance for the magnetic flux is provided for the movable armature and also the switch point contacts. The movable armature is connected to the yoke which is mechanically connected to the switch point contacts. These parts are safely held with the help of a spring. The spring is used so as to produce an air gap in the circuit when the relay becomes de-energized.
Status: Discontinued Vintage
Industrial Heavy Duty with Resistor
Input: DC.
Contacts: SPST NO.
Contact Ratings: 30Amp.
Coil Voltage: 6VDC.
Mech Mtg: Panel, Open Frame.
Connections: Copper Stud Terminals
Size: Overall with mount 3" long x 3.3" wide x 2.037" high.
Mount Feet Approximately 2.285" on center.
Note: Used/Removed from equipment.
Contacts may have visible oxidation that does not affect Operation.
Can Also be disassembled and used as a Heavy Duty 6 VDC Solenoid.
Simple Durable Design - Proudly Made in USA.
