Key-Operated Switch

Switch, key. Contacts: 2 NO contacts. Contact Ratings: 250 VAC/5A, 220VDC/0.1A, 24 VDC/2A (42 VAC/0.1A, 42 VDC/0.1A). Mech: Single hole mount with anti-rotation washer. Note: Snap action. Key removes in only one position. Learn More

Switch, key, SPDT, 3 access levels. See details below: Lock entrance requires a 15mm hole, mounts on two threaded holes 22 mm on center. Note: We have no factory datasheet on this custom-made high quality key switch. The nature of the switch is described as follows: The switch is provided with 3 pairs of functionally different keys: 2 are marked REG, 2 are marked X, 2 are marked Z. The switch lock cylinder has 5 rotary positions starting fully counter-clockwise numbered 1-2-3-4-5. The switch contacts consist of a SPDT micro switch. The micro switch has, a normally open contact and a normally closed contact sharing a common terminal. The normally-open contact is closed in position 2 only. The normally-closed contact is opened in position 2 only.The REG switches can only access positions 1 and 2. The REG keys are insertable and removable in both positions.The X keys can only rotate to positions 2-3-4. The X keys are only insertable or removable in position 2. The Z keys can rotate to all 5 positions, but the Z keys are only insertable or removable in positions 2 and 3. Learn More

Switch, key. Contacts: DPDT. Contact Ratings: 250VAC 5Amp. Actuator: momentary. 2 NO and 2 NC contacts. Mech: Panel 16mm. Note: Key removable in one position only (Not the momentary side). With 2 keys. Learn More

Switch, key. Contacts: 4 Position. Note: Selector switch, round cylinder lock, key maintained. Non-illuminated. Bulletin 800, series C OOXO, OOOX, OXOO, XOOO. Key is removable only in locked position. Learn More

Switch, key. 7 Position Master key or 3 Position Op. Mech: Panel. Body: Overall 1.106" D x 2.103" deep, behind panel. Two threaded mount holes at approximately 0.880" centers. Note: Complete with four keys, two each Master and OP. Keys are removable in only 2 positions, Master or OP. Learn More

Switch, key operated. Grounded 3 Way 10Amp 120/277VAC, quiet locking key operated switch. Alt P/N: 84293-0. Note: 1st 23 pieces sold have two keys each, last 7 pieces only have one key each. Learn More

23-piece Switch assortment kit used by Cutler Hammer salesmen. 24 pc counting the attractive black carrying case. Learn More

Switch, key assembly. 3 Position. Less switch. Two keys with plastic bezel, only. Learn More

Switch, key. Contacts: 3PDT D.B.. Contact Ratings: 250 VAC/5A, 220 VDC/0.1A, 24 VDC/2A snap action. Connection: solder terminals. Mech: Panel, 3/4-inch mounting hole keylock. Complete with 2 keys. Note: Keys remove in each position. Learn More

Switch, key. Contacts: SP Grounded. Actuator: momentary. Contact ratings; 120/277VAC/20Amp. Note: Locking switch. Color: brown. Application:for mounting in a 2x4 handy box. Learn More

Switch, key. Key operated locking switch, SP 120/277VAC 20Amp. Side wired/ spring loaded screw terminals, hex grounding screw for mounting in 2 x 4 handy box. Color: brown. Learn More

Switch, key. P/B 30mm, 40mm mushroom head/actuator - Only. Red, 2NC. Lockable. Key removesin only one position. Each with two contact blocks MCB-01. Learn More

Switch, key. Contacts: 3 Position. Key removable in Positions 1 (Fully -CCW) and Position 3 (Fully CW)). Switch terminals are 8-1-2-3 on rear. Closures per position are Position 1 (8-1) Position 2 (1-2) and Position 3 (2-3). Connection: solder. Panel. Mount in 0.750" dia, hole with double flats 0.625" apart.Note: Key No: S13CH. Complete with two keys, internal washer and one nut. New. Note: All switches a keyed the same.

Learn More

Switch, key. Actuator head only. Model B. NIB, with manufactures installation sheet. Learn More

Switch, key. With snap action switching element. Position A basic position. Position C maintained action. Key removable in position A. One switching element. Depth: 32mm. Factory new individually packaged. Learn More

Double Pole grounded key switch 20Amp locking quiet switch(For mounting in a 2X4 handy box). Learn More

Switch, motor. Key switch with enclosure. Learn More

Switch, motor. Key switch. Series A. No enclosure. Learn More

Switch, key. Front operating section for heavy duty 3 Position selector switches. Key removable in center position only. Cylinder lock. Learn More

Switch, key. Remote key station. Complete with indicator lights and test circuit. Note: All are keyed differently. Learn More