Toggle Switch
- Honeywell/Micro Switch - 104TL226-5 - Switch, Toggle / Rocker. 4PDT, 3 Position Military GradeSpecial Price $189.98 Regular Price $250.00
Honeywell/Micro Switch - 104TL226-5 Switch, Toggle.
4PDT (Mom) On/None/Off.
125VAC 7.5Amp/250VAC 6Amp.
Resistive DC: 125V 0.75Amp/250V 0.5Amp/28VDC 7.5Amp.
Inductive load: 125VAC 7.5Amp/28VDC 7.5Amp.
Termination IWTS (16-20AWG) MIL-S-3950.
Threaded bushing length: 0.432".
Actuator length: 0.643".
Operating temperature: -85 to 160 Deg F.
Terminals accept pins M39029/1-101, not included.
Note: Military. Environmentally sealed shaft.
Learn More - Honeywell - Micro Switch - 104TL1-72 - Switch, Toggle / Rocker. Contacts: 4PDT. /MS27724-3Special Price $48.98 Regular Price $55.00READY TO SHIP - ONLY 39 LEFT IN STOCK!
Honeywell - Micro Switch - 104TL1-72 -Switch, Toggle / Rocker
Contacts: 4PDT.
Contact Ratings: 0.75 A at 115 Vdc,0.5 A at 250 Vdc,0.5 A to 20 A at 0.5 Vdc to 28 Vdc,0.5 A to 15 A at 0.5 Vac to 277 Vac.
Actuator: (On) On (On) = (Mom) On (Mom).
Mech: Bushing 15/32 in.
Operating temperature: -85degF to +160degF.
Note: Environmentally sealed switch, completely sealed switching chamber, high strength, temperature resistant, non-tracking case, material and silver cadmium oxide contacts.
Military qualified MS27724-3.
Contacts: IWTS (14-16AWG) termination.
Double listed as MS27724-3 SKU 133204
Learn More - Carlingswitch - 2GK53-NBL3 - Model XSC1 - Switch, Toggle with Paddle, DPST 15A 125V, 10Amp 250VAC.IN STOCK - MORE THAN 100 READY TO SHIP!
Carlingswitch - 2GK53-NBL - Model 3XSC1 Switch, Toggle with Paddle.
G Series Toggle Switches Contains a slow-make, slow-break contact mechanism.
Contacts: DPST. Double Pole, On-None-Off
Contact Ratings: 15Amp 125VAC, 10AMP 250VAC, 1/2 HP 125-250 VAC
Actuator: Nylon Bat Handle. Toggle Length - .687", Bushing Length - .465"
Use .250" Tab Terminations
Note: With Hardware.
Alternates: 2GK51-NBL3, 35-3150, AML33FBA4AC01
New Old Stock
Learn More - C & K Components - 7401T1ZQE - Switch, toggle. Contacts: 4PDT.
C & K Components - 7401T1ZQE Switch, Toggle.
Contacts: 4PDT.
Contact Ratings: 5Amp.
Actuator: On/On.
Connection: Solder Terminals.
Mech: Panel Mount 0.5" D.
Note: Miniature.
Silver Plated Contacts.
Epoxy sealed. SS case.
Learn More - Eaton - Cutler-Hammer - AN3023-9 - 8713K14 - Switch, Toggle. DPST 20Amp.
Eaton - Cutler-Hammer - AN3023-9 - 8713K14 Switch, Toggle.
Contacts: DPST.
Contact Ratings: 20Amp.
Actuator: On-Off(Mom).
Normally Closed.
Connection: Screw Terminals.
Mech: Panel with 2 holes 1.85" centers.
Body: Flange 2.123" long x 1.262" wide x 0.046" thick.
Overall 2.123" long x 1.5" wide x 0.953" high plus contacts.
Note: Double marked AN3023-9 and ST55L.
NSN: 5930-00-548-5328
Genuine Vintage Cutler Hammer - New Old Stock
Made in the USA.
Learn More - Cutler-Hammer / Eaton - 7590K6 - Switch, Toggle. Contacts: DPST (2 Position).
Cutler-Hammer / Eaton - 7590K6 - Switch, Toggle.
The 7500 series general purpose Toggle Switch offers the widest selection of features and the design flexibility to meet a variety of applications.
Contacts: DPST (2 Position).
Contact Ratings: 6Amp @ 125VAC, 3Amp @ 250VAC, 2Amp 277VAC.
Elect Config: Off - None - On
Terminatuion: Solder Terminals.
Mech: Panel Mount with Threads.
Body: 1.317" long x 0.753" wide x 1" behind panel, including terminals. (33.3X31.8X14.3mm)
Note: Bushing: 3/8" D x 0.50" long.
Actuator: Bat 0.544" long.
Complete with Hardware.
Approvals: CSA, UL, RoHS Compliant
Genuine Cutler Hammer - New Old Stock
Alternate: Newark 04M4782, Allied 70155741, UPC 786685680514
Applications: Industrial
Learn More - Cutler-Hammer / Eaton - 3-678 - Switch, Toggle. Contacts: DPST 6A 125V.Special Price $4.98 Regular Price $6.95IN STOCK - MORE THAN 100 READY TO SHIP!
Cutler-Hammer / Eaton - 3-678 Switch, toggle.
Contacts: DPST. Contact
Ratings: 6Amp 125VAC / 3Amp 250VAC (2.5 A L 125VAC 2A 277VAC).
Connection: solder terminals.
Mech: Bushing length: 0.462" D x 0.462" long. Body: 1.339" long x 0.75" wide x 1.198" deep including terminals.
Actuator: plastic, black.
Made in USA
Learn More - Cutler-Hammer / Eaton - 7560K53 - Switch, toggle. DPST 15Amp 125VAC.Special Price $4.95 Regular Price $5.95Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC 1/2HP (10Amp 250VAC, 3/4HP 250VAC). Connection: screw. Mech: Panel. Body: 1.321" long x 0.747" wide x 0.735" high. Standard 15/32" threaded bushing x 0.478" long (seated 0.664" long). Note: No Bat. Learn More
- JBT - ST50M - Switch, toggle. Contacts: DPST, 15A 125VAC, 6.0A 250 VAC.Special Price $24.98 Regular Price $32.50
JBT - ST50M - Switch, Toggle.
Contacts: DPST.
Current: 15A @ 125 VAC
Current: 6.0A @250 VAC
Actuator: Off-On(Mom).
Connection: 4 Screw Terminals.
Mech: Single hole mount/bushing.
Dimensions: Width: 0.75 in, Height: 2.2 in, Length: 1.32 in
Note: Threaded bushing: 0.460" D x 0.460" long.
Actuator length: 0.694" long.
NSN 5930-00-615-5364
Made in the USA.
Learn More - Cutler-Hammer / Eaton - 8372K7 - 8372K107 - Switch, Toggle. DPST 6Amp 125VAC.Special Price $9.98 Regular Price $14.50Out of stock
Cutler-Hammer / Eaton - 8372K7 - 8372K107 - Switch, Toggle.
This line of switches employs a quick-make/quick-break contact mechanism. The resultant high-speed movement eliminates the “teasing” of the switch and reduces the pitting of the contact surfaces due to arcing. Self-cleaning and wiping contact action assures positive contact on switch operation. These switches are especially suited for use in small motor applications.
Contacts: DPST.
Contact Material: Bronze Silver Plated
Contact Mechanism: Quick-make/quick-break wiping action
Contact Ratings: 6Amp 125VAC, 3Amp 250VDC.
Actuator: On-Off.
Mounting means: Threaded bushing—0.468 in (11.89 mm) dia., 32 threads/inch
Keyway—0.068 x 0.035 in (1.73 x.89 mm) deep, provides anti-rotation featureConnection: Screw terminals, no hardware. #5-40 X 5/32"
Mech: Panel, Standard 15/32-32 threaded bushing seated 0.540" long.
Body: 1.156" long, plus contacts x 0.689" wide x 0.592" deep, plus contacts.
Note: P/N: 8372K7 is 8372K107.
NSN 5930-00-283-8804
Listed UL/CSA. RoHS Compliant
Made in the USA.
Learn More - Cutler-Hammer / Eaton - 3-139 - Switch, toggle. Contacts: DPST.Special Price $4.98 Regular Price $6.50
Cutler-Hammer / Eaton - 3-139 Switch, toggle.
Contacts: DPST.
Contact Ratings: 6Amp 125VAC.
Actuator: On/Off.
Connection: Solder Terminals.
Mech: panel, 0.45" threaded bushing.
New Old Stock
Learn More - CUTLER-HAMMER - SF6TCX392 - Switch, toggle. DPST RA.Special Price $1.98 Regular Price $3.00Out of stock
CUTLER-HAMMER - SF6TCX392 Switch, toggle.
Contacts: DPST.
Connection: RA PCB 4 Pin.
Mech: PCB. Body: 0.4" wide x 0.6" deep x 0.25" above pc board - plastic.
Note: Miniature. Red actuator, black body.
Learn More - Cutler-Hammer / Eaton - 3-211 - Switch, toggle. SPDT 6A/125VAC, 3A/250VACSpecial Price $4.98 Regular Price $6.50READY TO SHIP - ONLY 89 LEFT IN STOCK!
Cutler Hammer - Eaton - 3-211 - Toggle Switch.
Contacts: SPDt.
Contact Ratings: 6Amp 125VAC, 3Amp 250VAC.
Actuator: Off-On.
Connection: Solder.
Mech: Panel, standard 3/8" D x 0.339" (8.6mm) long, bushing mount.
Panel hole: 1.161" (29.5mm) long x 0.700" (17.70mm) wide x 0.652" (16.5mm) high, plus contacts.
Note: Flat bat 0.3777" (9.5mm) wide x 0.662" (16.8mm) long.
Learn More - Cutler-Hammer / Eaton * - 7585K4 - Switch, toggle. Contacts: DPST.$10.00Switch, toggle. Contacts: DPST. Contact Ratings: 6Amp 125VAC/3Amp 250VAC/ 2.5Amp 125VAC/2Amp 277VAC. Actuator: 2 Position. Connection: screw terminals. Mech: Panel, one hole. Body: 1.315" long x 0.755" wide x 1.037" below panel, including terminals. Note: Threaded bushing length: 0.357" (9.0mm). Actuator length: 0.573" (14.5mm). Made in the USA. Learn More
- EATON - CUTLER-HAMMER - 7590K9 - Switch, Toggle. DPST. 6A/125VAC, 3A/250VACSpecial Price $9.98 Regular Price $12.00Out of stock
EATON - CUTLER-HAMMER - 7590K9 - Switch, Toggle.
Contacts: DPST.
Contact Ratings: 6Amp 125VAC/3Amp 250VAC.
Actuator: On-Off-On.
Connection: Male 1/4" spade terminals.
Mech: Panel, one hole.
Body: 1.324" long x 0.750" wide x 1.157" behind panel including terminals.
Note: Threaded bushing length: 0.377".
Actuator length: 0.564".
UL listed, CSA approved.
NSN: 5930007107659
Proudly Made in USA
Learn More - Cutler-Hammer / Eaton - 8371K7 - Switch, toggle. DPST 6A 125V.$9.00Out of stockSwitch, toggle. Contacts: DPST. Contact Ratings: 6Amp 125V AC/DC, 3Amp 250VDC. Actuator: On - Off. Connection: 4 wire leads, 18AWG, 6" long. Mech: Panel mount. Bushing: 3/8" x 0.480" long. Body: 1.156" long x 0.937" x 0.687". Note: Listed: UL/CSA. Learn More
- Cutler-Hammer / Eaton * - 8373K8 - Switch, Toggle. DPST 6A @ 125VAC, 3A @ 250VDC.Special Price $12.98 Regular Price $18.50
Cutler-Hammer / Eaton * - 8373K8 - Switch, Toggle.
DPST 6Amp @ 125VAC, 3Amp @ 250VDC.
Threaded bushing: 3/8" x 0.355".
Actuator: 0.50".
Dimensions: Overall 1.153" long x 0.687" wide.
Termination: 6 Solder Terminals.
Genuine Cutler Hammer - New Old Stock
Military NSN 5930-00-259-8341.
Learn More - Cutler-Hammer / Eaton * - 7665K4 - Switch, toggle. 4PDT 15A 115VAC.$17.50Switch, toggle. Contacts: 4PDT. Contact Ratings: 15A 115VAC (20Amp Resistive) 400Hz. Actuator: On-On. Connection: 12 solder contacts. Mech: Panel. Body: 1.442" (36.6mm) long x 1.332" (33.8mm) wide x 0.977" (24.8mm) high, plus contacts. Note: Threaded bushing: standard 3/8" D x 11.7mm long. Actuator: 17.1mm long. Complete with hardware. Alt P/N: MS25068-23. Learn More
- SAFRAN EATON CUTLER-HAMMER - 8512K15 - Switch, toggle. 4PDT 15A 115V.Special Price $42.98 Regular Price $56.00
SAFRAN EATON CUTLER-HAMMER - 8512K15 - Switch, toggle.
Contacts: 4PDT.
Contact Ratings: 15Amp 115VAC.
Actuator: On-On-On.
Connection: Flush terminal screws.
Mech: Panel, bushing 15/32".
Body: 41.8mm long x 33.5mm wide x 32.0mm deep behind panel.
Note: Environmentally sealed switch (watertight). 20,000 Operations at rated load.
Threaded bushing length: 12.1mm.
Actuator length:17.3mm.
Complete with hardware.
New Old Stock- Made in USA
Learn More - C & K Components - 7401SY9CBE - Switch, toggle. 4PDT 5Amp 120VAC.$9.95Switch, toggle. Contacts: 4PDT. Contact Ratings: 5Amp 120VAC or 28VDC (0.4VA 20V AC/DC). Actuator: On-None-On. Connection: PC terminals. Mech: PCB, vertical. Panel hole: 0.845" long x 0.500" wide. Note: Miniature. Non-threaded bushing. Learn More
- C & K Components - 7411SHZBE - Switch, toggle. 4P On-On-On.Special Price $18.98 Regular Price $24.50
C & K Components - 7411SHZBE Switch, toggle.
Contacts: 4P.
Contact Ratings: 5Amp 120VAC or 28VDC (0.4VA 20V AC/DC).
Actuator: On-On-On.
Connection: Solder.
Mech: PCB, vertical.
Panel hole: 0.845" long x 0.500" wide.
Note: Miniature. Threaded bushing.
Complete with hardware.
Learn More - JBT - ST50L - Switch, Toggle. Contacts: DPST NC, 15A,125VAC, 6A 250VAC.Special Price $24.98 Regular Price $34.50
JBT - ST50L - Switch, Toggle.
Contacts: DPST Normally Closed (NC).
Current: 15A @ 125 VAC
Current: 6.0A @250 VAC
Number of Positions: 3
Actuator: On - None - (Off), Momentary - Off.
Connection: Screw Terminals.
Mech: Standard 15/32" Threaded Bushing.
Dimensions: Width: 0.75 in, Height: 2.2 in, Length: 1.32 in
Alternate: 5225S
Made in USA
Learn More - Safran - Cutler-Hammer - Eaton - 8867K5 - Switch, toggle. DPST On/Center-off.Special Price $12.98 Regular Price $14.50
Safran - Cutler-Hammer - Eaton - 8867K5 Switch, toggle.
DPST On/Center -off.
Threaded bushing: 1/4" D x 0.144" long.
Actuator: 0.445" long.
Dimensions: 0.530" x 0.544", square.
Termination: 4 solder terminals.
Note: Miniature. Complete with hardware.
NSN: 5930-00-889-8602
Made in USA
Learn More - Eaton CUTLER-HAMMER - 8511K7 - Switch, toggle. DPST None/Off/ON(Mom).Special Price $28.98 Regular Price $36.50
Safran Eaton CUTLER-HAMMER - 8511K7 - Switch, toggle.
DPST, Off/ON(Mom).
Threaded bushing length: 0.461".
Lever length: 0.681".
Environmentally sealed.
One hole mount.
Dimensions: 1.324" long x 0.891" wide x 1.224" high.
Contacts: 4 screw terminals.
Complete with hardware kit.