Unidentified MFG - TCO-D085 PRGR 87C - Thermal Cut Out, Axial Leads, 87C/188F.
- Buy 10 for $1.98 each and save 34%
Unidentified MFG - TCO-D085 PRGR 87C - Thermal Cut-outs, Axial Leads
Thermal Cut-offs (also known as Thermal Fuses) are miniature, NON-RESETTABLE temperature sensitive devices designed to prevent appliances and electronic equipment from overheating. Thermal cutoffs are UL and CSA listed. Literally thousands of different applications have been devised for thermal-cutoffs, thus providing a large replacement market. Such applications include: Hair Dryers Refrigerators Battery Chargers Irons Hot Plates Glue Guns Electric Motors Window Fans Coffee Makers Microwave Ovens Popcorn Poppers Dishwashers And hundreds of others The TCO (Thermal Cut-Off) responds to temperature by interrupting an electrical circuit when the operating and/or environmental temperature exceeds the thermal rating of the device. This is accomplished when the internal organic pellet experiences a phase change, allowing the spring activated contacts to permanently open the circuit.
Trip Open Temperature: 87C / 188F
Maximum Current Rating: 15 Amps
Typical Opening Temperature Tolerance: +0°C, –4°C
18 Gauge Solid Copper Wire
Full 1 1/3” leads to fit all replacement configurations
Note 1: Temperature sensitive devices. Do not store above +48°C (+120°F).
Note 2: Color Band does not denote temperature group.
Note 3: The electrical resistance of the thermal cut–off is comparable to that found in an equal length of 18 gauge solid copper wire. With proper air flow, heat generation below 15 Amps is minimal, above 15Amps the upper limit on the currentcapacity will depend on the environment for each specific application.
Note 4: A general rule of thumb for continuous operating temperature for thermal cut–offs is 30°C less than the Maximum Opening Temperature.
TCO-D085 PRGR 87 C.
Alternate: NTE 8085
SKU | 2889 |
---|---|
Condition | NS - NEW SURPLUS |
Part Number | TCO-D085 PRGR 87C |
Alternative Part Number | NTE 8085, 5-208 |
Unidentified MFG - TCO-D085 PRGR 87C - Thermal Cut-outs, Axial Leads
Thermal Cut-offs (also known as Thermal Fuses) are miniature, NON-RESETTABLE temperature sensitive devices designed to prevent appliances and electronic equipment from overheating. Thermal cutoffs are UL and CSA listed. Literally thousands of different applications have been devised for thermal-cutoffs, thus providing a large replacement market. Such applications include: Hair Dryers Refrigerators Battery Chargers Irons Hot Plates Glue Guns Electric Motors Window Fans Coffee Makers Microwave Ovens Popcorn Poppers Dishwashers And hundreds of others The TCO (Thermal Cut-Off) responds to temperature by interrupting an electrical circuit when the operating and/or environmental temperature exceeds the thermal rating of the device. This is accomplished when the internal organic pellet experiences a phase change, allowing the spring activated contacts to permanently open the circuit.
Trip Open Temperature: 87C / 188F
Maximum Current Rating: 15 Amps
Typical Opening Temperature Tolerance: +0°C, –4°C
18 Gauge Solid Copper Wire
Full 1 1/3” leads to fit all replacement configurations
Note 1: Temperature sensitive devices. Do not store above +48°C (+120°F).
Note 2: Color Band does not denote temperature group.
Note 3: The electrical resistance of the thermal cut–off is comparable to that found in an equal length of 18 gauge solid copper wire. With proper air flow, heat generation below 15 Amps is minimal, above 15Amps the upper limit on the currentcapacity will depend on the environment for each specific application.
Note 4: A general rule of thumb for continuous operating temperature for thermal cut–offs is 30°C less than the Maximum Opening Temperature.
TCO-D085 PRGR 87 C.
Alternate: NTE 8085