WattStopper - HB350W-L3 - High Bay Passive Infrared Occupancy Motion Sensor for Wet Locations
- Buy 10 for $38.98 each and save 9%
WattStopper - HB350W-L3 - High Bay Passive Infrared Occupancy Motion Sensor for Wet Locations
The HB350W-L3 High Bay Passive Infrared (PIR) Occupancy Sensors for Wet Locations consist of a sensor and a lens
module. Designed for automatic lighting control in warehouses and other medium and high bay wet location applications.
The HB350W-L3 occupancy sensors are designed to mount to a light fixture and control one load in that fixture. They can be wired to control all ballasts in the fixture, or to control half of the ballasts, providing high/low lighting control. When motion is detected within the sensor’s coverage area, the relay in the sensor closes, and lighting loads are automatically turned on. When motion is no longer detected for the duration of the time delay setting, the relay opens and the lighting load is turned off. The sensor’s sensitivity and time delay settings are factory preset at “normal” and 15 minutes, respectively, which are suitable for high
bay applications. However, if the values need to be adjusted for specific applications, they can be easily changed using the DIP switches on the unit.
Weight: 6 Ounces
UPC: 754182924042
Additional Information:
https://www.mc-mc.com/ASSETS/DOCUMENTS/ITEMS/EN/WattStopper_HB350W_L3_Installation_Instructions.pdf
https://assets.usesi.com/product-media/brochures/500654_brochure.pdf
New
| SKU | 177198 |
|---|---|
| Condition | FN - FACTORY NEW |
| Part Number | HB350W-L3 |
WattStopper - HB350W-L3 - High Bay Passive Infrared Occupancy Motion Sensor for Wet Locations
The HB350W-L3 High Bay Passive Infrared (PIR) Occupancy Sensors for Wet Locations consist of a sensor and a lens
module. Designed for automatic lighting control in warehouses and other medium and high bay wet location applications.
The HB350W-L3 occupancy sensors are designed to mount to a light fixture and control one load in that fixture. They can be wired to control all ballasts in the fixture, or to control half of the ballasts, providing high/low lighting control. When motion is detected within the sensor’s coverage area, the relay in the sensor closes, and lighting loads are automatically turned on. When motion is no longer detected for the duration of the time delay setting, the relay opens and the lighting load is turned off. The sensor’s sensitivity and time delay settings are factory preset at “normal” and 15 minutes, respectively, which are suitable for high
bay applications. However, if the values need to be adjusted for specific applications, they can be easily changed using the DIP switches on the unit.
Weight: 6 Ounces
UPC: 754182924042
Additional Information:
https://www.mc-mc.com/ASSETS/DOCUMENTS/ITEMS/EN/WattStopper_HB350W_L3_Installation_Instructions.pdf
https://assets.usesi.com/product-media/brochures/500654_brochure.pdf
New
