Fans

Comair Rotron -  032942 - ST12B3QDNX - Fans, Axial.

Sprint 12VDC 0.28 Amp, 3.4 watt (Operates with 6 to14 VDC) 

3400RPM, 34CFM.

Plastic blades & housing, ball bearings.

Noise 41dB 

Connections: Red + Positive, Black - Minus, Blue Stall

PTC and Polarity Protected - 10sec. Delay from stall until output goes Low

Dimensions: (80 x 32mm).

Fan Stall Output: Open Collector (Requires Pull-Up Resistor) 15mA max Sinking

OverallDimensions: 3.15" x 3.15" x 1.3".

3.15" (80mm) square with four 6-32 threaded inserts on strut side at 2.81"centers.

Weight: 0.45 lb

Newark Stock No. 91B3081

UL, CSA Listed

SHICOH IC FAN - 0610-12 -  0610-12HHV - 12VDC 2 Wire Brushless Fan, Axial.

In Japanese Shicoh means “thinking” it is the working philosophy of everyone at Shicoh Engineering.

12VDC 0.15A. (230mW) 3.5".

Termination: 2 Wire,  22 AWG Female Connector

11 Plastic Blade Ultra Quiet Server Square Fan.

Brushless Ball Bearing Motor

4 hole 2" Spacing.

Overall Dimensions: 2.35" x 2.35" X 0.425". (60mm X 60mm X 10.3mm)

Opening: 2.3".

Mounting: 4 Hole 2" (50mm) Spacing

Weight: 0.9 oz.

Silent at 6VDC, Lots of air Flow at 12VDC

Air Flow @ 12VDC: 12.7 CFM (m3/min)

RPM: 3300

Very Thin, Silent on 6V, Lots of Air at 12V.

Number Fan Blades: 11

Material-Venturi / Propeller: UL94V-0 Plastic

Static Pressure (Max): 12.7 / 0.33(m3/min) 

Noise: 16.7 (dBA)

Weight: 0.9 Ounce

Life Expectancy-MTBF: 50,000 Hours @ 25C

Applications: Computer/Server/IC/CPU Cooling

Quality Made in Japan prior to current product line transfer to China.

New Old Stock.

Approval: UL/CSA

Alternates: Dynatron F6010AP-12LCWDF126010BL, Quick Cool E232190, F6010AP-12LCW 

Globe - D47-B10B-04W49-00 Fan, axial.

Power: 12VDC 0.44amp, 3.6 Watt

Air flow: 88 CFM.

Ball bearing.

Material: Plastic.

Dimensions: 1" x 4.7" square (120mm x 120mm x 26mm), 7 blades.

Weight: 6 oz (218.291g)

Used/Removed from equipment.

NIDEC-TORIN - TA225DC - A31390-10 Fan, Axial.

Input Power: 12VDC 0.08A. 2 Wire/Pin.

Speed: 2600 RPM.

Air Flow:12 CFM.

Construction: 9 plastic blades metal frame.

Mounting: 2 hole 2.78" spacing.

Dimensions: 2.37" x 2.71" x 0.8".

Opening: 2.25".

Ball Bearings.

Weight: 3.6 oz.

Terminals Out Top, Solder or Small Quick Connect

Model A31390-10.

Made in Japan

Mopar - Chrysler Dodge Plymouth  -  Heater  - Blower Motor Switch, Rocker, Automotive.

Actuator: 4 Position (Off is Open, LO=C TO L, MED= C TO M, HI=C TO M + HI).

Connection: (4 Terminal) Male Quick Connect terminals.

Body: Overall 1.316" long x 1.448" wide x 1" behind panel.

Actuator extends to 1.571" above assembly.

Note: Blower Motor Switch.

Mounted on a plate 1.316" long x 1.448" wide.

Vintage - Genuine Chrsyler Dodge Plymouth - Factory New Old Stock

Similar to 3502681 (1970's Vintage)

Alternate Appplications - Hobbyist Motor/Fan Control

COMAIR ROTRON - ST12G6X - 031504 - Fan, Axial, Sprint DC.

12VDC 0.12Amp 1.4 watt,

Airflow: 33 CFM.

Sprint DC.

Plastic 5 blades.

PTC & Polarity Protected

Mount: Panel 4 holes with 2.82" centers.

Dimensions: 80mm Square x 32mm wide.

Note: Alt P/N: 031504.

UL, CSA Listed 

Condition: LN Used/Removed from equipment.

Mixed length on lead wires. Some slightly dusty/dirty.

Weight 7 oz.

Miniebea NMB - 4710NL-05W-B50 - 24 VDC Axial Fan, 119X119X25.5mm, Case/Server Cooling Fan 

Brand: NMB-Minibea DC Brushless Fan Motor

Dual Ball Bearing

Size: 120*120*25mm

Air Flow: 114.7 CFM

Speed: 2800 RPM   Noise: 41.3 dB

Power: 6.96 Watts

Operating Temperature: 14 to 140F (-10 to 60C)

Mean Time to Failure (MTTF): 180,000 hours

Rated voltage: 24 VDC - 2 Wire, 0.31 Amps

Approvals: CE, CSA, UL, VDE

RBM CONTROLS/ESSEX - 54-6406 - 12VDC SPST Automotive Blower Relay

NO 72-Ohm Coil

Auto Automotive Blower Relays

3-Terminal

1/4"Quick Connect Lug/Terminals

Note: Terminals 1 + 3 are N.O. contacts, Terminal 2 is positive 12V, case is neg or ground, with a heavy steel housing - flange mount 2 holes 1.7" centers 3.7oz

TRW GLOBE - 19A2689 Fan, Axial. Xerox 127P1668 

A Vaneaxial fan consisting of a disk-type wheel within a cylinder with a set of air guide vanes. It has a higher efficiency than any other type of axial-flow fans and more expensive to manufacture.

24VDC.

Vaneaxial.

Dimensions: Round 2.620" D x 2.577" deep.

Mounts in hole with instrument-style flange front, four holes 2.111" apart, 3" centers.

Four plastic blade.

Two wire, 5" long with a 2 position Molex connector.

Made in USA

Fan, axial. 5-13VDC, 0.20Amp. Marked: "C.T.55 13 5VDC". 9 Blade. With a sealed Buehler box on a bracket, 2 leads for 5-13VDC and 4 leads going to the motor, 1.9" deep overall. Maybe replaced with 1.69.011.128. Dimensions: 62x22mm plus motor.

COOLTRON - FD4010B12W7-81-2N Fan, Axial.

12VDC 130mA 2.16 watt, 9 blade.

Operating Voltage: 6.0 to 13.8 VDC

Ball Bearing.

Air Flow: 5.5 to 8.6 CFM.

Static Pressure: 3.7 (mmH20).

Noise: 28.60 dBA.

Material: Thermoplastic, PBT, UL 94V-0

Operation Temp: -20℃~70℃ (Humidity 15%-90%RH)

Storage Temp: -40℃~85℃ (Humidity 15%-90%RH)

Insulation Resistance: 10MΩ, 500VDC/min between bare wire and frame

Dielectric Strength: 5mA max. 500VAC/min between bare wire and frame

Dimensions: 1.6" square x 0.412" deep, (40 x 40mm x 10.5mm deep).

Mount: 4 hole, 1.77" (32.0mm) Centers. 

With 2 conductor #28 AWG wire leads.

Life Expectancy: 80,000 Hours @ 40C

Alternate: FD4010-81 Series

UL, CUL, TUL Approvals

Applications: Server and General Equiment Cooling

Additional information: http://www.cooltron.com/uploads/soft/20150811/1439267854.pdf

https://www.datasheetarchive.com/whats_new/669a1639db195bddfc0eef380b68db3d.html

http://www.cooltron.com/stockshow/pdf/FD4010B12W7-81-2N2.pdf

https://www.youtube.com/watch?v=fH_2Jjzqzxg

EBM Papst - W2G076-BD01-13 - Fan, Axial, Ball Bearing.

Voltage:  12VDC

Nominal Voltage Rating: 6 -16 VDC

Power: 4.0 watt

Air Flow: 67 m3/h

Speed: 4200 RPM

Sound Power Level: 5.8B

Sound Pressure Level: 43

Numer of Blades:5 Blade

Construction Material: Glass-fiber reinforced PBT/PA Plastic.

Temperature: -20 C to 75 C

Connections: Quick Connect

Dimensions: 3.15" square x 1.26" deep (80mm x 32mm).

Service Life: 62500 Hours

Protection: IP54 / IP68

Approvals: VDE, CSA, UL, CE

Used/Removed from equipment.

EBM Papst.

U. S. Toyo Fan - TAC12038115HT - Fan, Axial.

Ball Bearing AC Fan

Size: 119mm X 119mm X 38mm

115VAC 50/60Hz 0.24Amp/0.18Amp. 

Power: 17.0 Watts

Speed: 3000 RPM

Noise 47 dB @ 1M

Airflow: 105 CFM

(17 watt 60Hz 3000RPM 105CFM

Made in Taiwan

DC DENSITRON CORP. - DPF60B12L - DC Brushless Fan, 12VDC 0.1A

Voltage: 12VDC

Current: 0.1A (100mA)

Thick 10-Blade Plastic Fan,

2-Wire Pancake Fan.

Dimensions: 60mm Square x 15.8mm

New Old Stock

Made in Japan