Ferrite & Toroid Core

Inductor, ferrite. Inductance: 15uH. Tolerance: 20%. DCR: 0.26 Ohm. Shielded. Package: SMD, 4.0 � 4.0 mm footprint; less than 1.8 mm tall. More info: http://www.coilcraft.com/pdf_viewer/showpdf.cfm?f=pdf_store:lps4018.pdf Learn More

Laird - DM STEWARD - STE28S0670-000 - 28S0670-000 - Ferrite.

One Piece Split Core Ferrite Suppressors for Flat Cable 150ohms 100MHz 12.5mm Inside Slot

Impedance: 60 Ohms @ 25 MHz, 150 Ohms @ 100MHz, 310 Ohms @ 300 MHz

Core Material: 28  

Operating Temperature: -40 C to 125 C         

Has two rounded edges on opposite side which are 0.095" wide x 0.59" deep x 0.13" tall.

Dimensions: Inside Length: 12.5 mm, Outside Length: 17.02 mm, Outside Width: 14.99 mm, Inside Height: 0.51 mm, Outside Height: 3.4 mm  

Laird Technologies Acquires Steward, Inc. and Its Subsidiaries in 2006

Newark P/N 32AC5311

New Old Stock

Made in USA

Learn More

Amidon FB73-2401 - Ferrite Beads - 9.6mm Round

• Amidon Ferrite Shielding Bead
• EMI/RFI Supression Bead, Ferrite Bead

Dimensions: 9.6mm round x 4.9mm high with a 4.8mm id. (OD 0.38, ID 0.197, HT 0.19)

Permeability 2500

AL @ 10KHz (nH/N2) 1585 (Reference Only)

Ae (cm2) 0.11

Le (cm) 2.15

Frequency  Typical Impediance

1MHz          8  Ohm

5 MHz         20 Ohm

10 MHz       20 Ohm

25 MHz        15 Ohm

https://www.amidoncorp.com

Learn More

Inductor, ferrite. 68uH 70mA. Tolerance: 5%. DC Resistance: 16.6 Ohm. Test frequency: 2.52MHz. Unshielded. Case: 1008 (2520 metric) SMD. Dimensions: 2.5mm long x 2mm wide x 1.8mm high. Rohs compliant. Factory new parts. Learn More

Inductor, ferrite. 22uH 1.5Amp 10% 110mOhm (0.11 Ohm). Technology: wirewoud. Case: SMD. Dimensions: 0.307" (7.8mm) long x 0.276" (7.0mm)wide. Seated height: 0.217" (5.50mm). New. Learn More

Wilco - ES-8088 - Inductor, Ferrite. Inductance: 3.9mH Current: 50mA Resistance: 10 Ohm Type: Radial, Wirewound. Core Material: Ferrite Mount: PCB Temperature: -55 C to 125 C Case: 2 Pin Radial. Dimensions: 0.340" Diameter x 0.423" High. Lead Spacing: 5.0 mm. Alternates: Alcara 045-0170, AIUR-04-392J, Bourns RLB9012-392KL Made in USA Learn More

Inductor, ferrite. 1mH 250mA 2.4 Ohm. Tolerance: 20%. Case: SMD. New. Learn More

Inductor, ferrite. 330uH 0.4Amp. DC Resistance: 1.26 Ohm. Magnetic shielded. Case: 3128 SMD. Note: Factory new from manufacture 13" reel. Alt P/N: DX045-0192-SMT.

Learn More

Inductor, ferrite. Core. Dimensions: 0.475" D x 0.603" long. Thickness 0.095", and with an ID of 0.278". Learn More

Inductor. Model AT-14E. Mount: PCB. Miniature open frame 6 Pin. Dimensions: 14.6mm long x 14.5mm wide x 11.6mm high. Note: Marked 34D01. Mitsumi Electric/Mitsumi Newtec.

Learn More

Inductor. Ferrite center. Yellow housed, 4 to 5 turns of magnet wire. Mount: PCB, 2 Pin. Dimensions: 9.7mm x 9.7mm x 12.0mm high. New. Note: Manufacture Frontier Electronics Co Ltd. Learn More

Frontier - 2405-12 - Inductor.

Frontier Electronics is a leading designer and manufacturer of passive components including Magnetics (Inductors, Transformers, Coils), Diodes, MLCCs, and Integrated Passive Components (Antennas, Baluns, Filters, Diplexers).Frontier Electronics' corporate headquarters and main warehouse is located in Simi Valley, California.

Ferrite Center.

Red Housed, 12 turns of Magnet Wire.

Mount: PCB, 2 Pin.

Dimensions: 9.7mm x 9.7mm x 12.0mm high.

New.

Note: Manufacture Frontier Electronics Co Ltd.

Learn More