Starters & Contactors

Motor starter. Manual 3-phase. Adjustable from 10-16A. 240/480V. Learn More

SERIES B 690VAC 0.60A Adjustable 0.4 - 0.6A Current MANUAL MOTOR STARTER AC3 2-push buttons w/ (1) 140-A11 1 N.O & 1 N.C. Auxiliary Switch 8 oz. Learn More

Cutler-Hammer / Eaton - 10172H- 10172H 334A - Thermal Overload Switch

Status: Discontinued

Pilot Duty Ratings: 115-230 VAC, 30A

Body Approximate Overall Dimensions: 2.2" x 1.95" X 1.0"

New Old Stock - This Item has no Shelf Life

NSN 5925-00-783-5581

Made in USA

Learn More

SIEMENS - 3TF4010E-0A1S - Relay, AC.

Coil: 24VAC

Contacts: 3-Pole 20Amp with 1 N.O. auxiliary contact.

Mounting: DIN rail.

Size: 1.75 x 3.0 x 3.3"H.

Weight: 2 lbs.

Made in Germany

New

Learn More

Contactor, Reversing. Size A. Coil:24VDC. 3-Pole open type. Auxilliary: (2) N.C.I.-DC HP: 1.5 at 200/230V, 3A 460V, 5A 575V. 5.2"L x 3.5"W x 5.6"H. weighs 2.5 lbs unpacked. Learn More

General Electric - CR101H400H - Manual Motor Starter.

Enclosure NEMA 4

Number of Poles 2

Number of Thermal Units 1

Current Rating: 16 Amperes

Type:     Full Voltage

1 Phase HP/Volts: 1/4 HP at 32 VAC, 1 HP at 115/230 VAC, 3/4 HP at 277 VAC 25 to 60 Hz

Dimensions: Length 2 3/4 Inches, Depth 4 9/16 Inches, Width 4 1/4 Inches

Weight: 3.75 lbs.

1 HP Maximum

Toggle, With Handle Guard/Lock Off.

Genuine General Electric - Factory New Old Stock

Learn More

ALLEN BRADLEY - AB - 500F-FOJ930 - Contactor Contactor, Size 5, 3-pole, 24 VAC coil, 270A AC continuous rating, 500 MCM terminals included. Voltage type for actuating: AC Rated control supply voltage at AC 50 Hz: 110 V Rated control supply voltage at AC 60 Hz: 120 V Type of electrical connection of main circuit: Screw connection Service limit current rating: 311 A Continuous current: 270 A Heat dissipation: 19.8 W Circuit closing inrush current peak including offset, max: 3163 A NEMA size: Size 5 Pole configuration: 3 power poles with 1 NO auxiliary contact Operating volt amperes burden: Sealed: 96VA, 60 Hz coils (series L) Hp rating, max 75 Hp @ 230V load voltage, 3-phase (plugging and jogging duty) Transformer primary switching kVA rating: 94 kVA @ 460V load voltage, 3-phase (inrush current ≤20 times continuous current) Modular version: Yes Coil operating limits: 85 % Factory New Learn More

FILNOR INC. - 9857-FH80 1.03-Ohm - Grid Resistor, 80 Amp, Class 9857.

Number of Taps: 10

Drawing Number: R27189

Class 9857 - Stainless Steel Grid Resistors
• Standard grid resistors in stock to reduce costly down time
• All units are insulated for 1000 volts AC or DC
• Reliable stainless steel resistor elements and terminals
• Standard 26.5” dimensions for quick replacement of otherbrands
• Stable resistance over wide temperature ranges
• High wattage saves space, weight and cost

Silicon Bonded Mica Insulating Washers -Higher Temperature rating than epoxy bonded.

End Frame Insulator -Molded fiberglass material is used to insulate the connection
between the support rods and the end frame. This allows for the grid structure to be held securely together and double insulated to ground.

Support Rods - Threaded support rods are insulated with silicon bonded mica tubing to provide primary protection from grounding/shorting out.

End Frames - Filnor endframes are designed so that the resistors can be mounted in racks or stacked.

Dynamic Braking Stainless Steel Grid Resistor - stamped grid, chomium alloy stainless steel grid resistors - Reliable stainless steel resistor elements and terminals - 8 evenly spaced taps.

Dimensions: 26.5" X 12" X 6".

Applications: • Crane Control • Dynamic Braking • Neutral Grounding • Harmonic Filters • Mining Equipment • Transit • Load Banks • AC and DC Motor Acceleration

Made in USA

Learn More

3-Phase 63Amp NEW Telemecanique - Square D Starter, self protected with options LA1LC010. LA1LC021. LA1LD080BD-24VDC. LD5LD030-switch. Approx 8.7" x 11'D x 8"H. Weighs 21-pounds before packing. NEW Starters, Integral, Self-Protected, Open, 63 Amp Learn More

Square D - 9999SX6 - Contactors.

Auxiliary contact 1NC for size 00-7 starter.

Coil Voltage (AC): 600 V

Contact Current Rating: 10 A

Current Rating: 10 A

Logic Function: OR

Number of Contacts: 1

Termination        Quick Connect

Voltage Rating (AC): 600 V

RoHS: Compliant

Series B.

Without hardware.

Learn More

SIRIUS 3RV1021-1EA10 2.8-4Amp OVERLOAD RELAY Manual Self-Protected Combination Motor Control WITH SIRIUS 3RA1125-1ED23-1BB4 Fastbus Combination Starter, mounted on FBS2545 3-wire frame. Instr. Ord. No:3ZX1012OHTV02?-1AA1 And 3ZX1012-0RT02-1AA1. 180x45x155mm tall including mount. Learn More

460V 3-Ph 60Hz 8-FLAmps 5HP Adjustments: T90-400%FLA Initial Current - T290-400%FLA Current Limit - 0-2Sec Starting Pulse - 30-2Sec Acc Time - Econ-O-Mizer On/Off - 50-400%FLA Current Trip Used, with Lectron Current Calibrator module and MOV505. 6.5" x 5" x 5.4" high Solid State Motor Control. Learn More

Motor starter heaters for magnetic starters, full voltage. Maximum motor full load amperes 4.43 - 4.87 Learn More

GENERAL ELECTRIC - QC2IGA ASTAT - 7.5HP Reduced Voltage Motor Starter

ASTAT-CD Plus solid state reduced voltage starters (also referred to as Soft Starters) provide smooth, stepless acceleration/deceleration of AC squirrel-cage induction motors from zero to full speed over an adjustable time period. ASTAT-CD Plus starters are supplied with 120/240 VAC (50/60Hz) control power input.

Learn More

AUX CONTACT Kit 1NO / 1NC For series CR305-308 NEMA 1&2 CAUTION: Before installing in a Nuclear application, determine that the product is intended for such use. This message brought to you by GE - we bring good things to life. Learn More

Motor, controls. General duty safety switch disconnects 200Amp 240VAC 3 phase, non-fused. Catalog number JU324. Learn More

3-Phase 200-460V 50/60Hz Suitable for reduced torque on start.12Amp Max FLA 208/230V-3HPmaximum 380/415V-5HP 460V-7.5HP 575V/10HP Use with magnetic starter - Requires separate motor Overcurrent, Overload and Overheating Protection. Two adjustable starting torque settings for reversing or two-speed applications. Adjustable starting ramp time to 7 seconds. Not suitable for high torque loads. Open/panel Learn More

Contactors, contacts. Series A, auxiliary contact block. Learn More

Contactors, auxiliary contacts. Series B, size 0-4, 2 NO. Learn More

Resistor, ceramic. Resistance: 250 Ohm. Power: 10 watt. Adjustable with slider. Technology: wirewound. Enamel coated. Dimensions: 0.385" D x 1.75" long. Radial solder lug. Package of 2. Learn More

Resistor Kit for SLO-SYN synchronous motors. 250 Ohm tubular wirewound 5% with mounting brackets. Cross: A201052-41. BM102088-020. Learn More