Power Supply

LAMBDA - KWS15-12 - 12VDC @ 1.3AMP

Sealed Modular

PC Mount 120/250Vac-In MFG.

NEMIC/LAMBDA

Learn More

Endicott Research Group ERG - E505-.4050U DC/DC Converter.

ERG’s E505-.4050U is a 500 Series DC-DC converter that converts a 5 VDC input voltage to 40 VDC@ 50mA, unregulated. There are many custom variations within each Series.

5VDC to 40VDC 50mAmps DC -DC CONVERTER

E 500 Series Unregulated Encapsulated

New 5-Pin module PCB Mount

Overall Dimensions: 1.4" (35.7mm) wide x 1" (25.4mm) deep x 0.777" (19.7mm) tall.

Additional Information: http://ergpower.com/pdf30/DC_DC_Converters.pdf 

Applications: The voltage needed could be for any number of applications, such as an ink jet printer used for CAD drawings or medical data where each jet needs 40 VDC to operate and that voltage is not in the system; so a DC-DC converter can be installed to convert 12 VDC to 40 VDC for each jet. Other applications that ERG’s DC-DC converters are used for include fuel pumps, test equipment and many others.

Proudly Made in USA

Learn More

Endicott Research Group ERG - E1353 Voltage Inverter Converter

ERG has been matching DC-AC inverters to backlit LCDs since 1979 for customers in the USA and around the world. ERG offers the industry’s widest range of DC-AC inverters for powering CCFL-backlit flat panel displays, bar none. Open frame and encapsulated inverters. Single-lamp to 6-lamp inverters.

DC-to-AC Converter

Converts 5 VDC to 200 VAC at 25 kHz.

Mount: PCB (4 Pin)

Encapsulated

Applications: Epson LCD driver. Power to ensure longer useful EL (Electroluminecent Lamp) Lamp Life. ERG supports all major manufacturers of CCFL-, LED- and EL- backlit LCDs, and offers a broad array of standard and custom solutions.

Alternates: EG9013, 8M059013

Proudly Made in USA

Learn More

DC/DC Converter. Output: +/-12V 30Watts. Input: 48V(-35 to -60VDC@ 1.2A). Dimensions: 3" square x 0.4" high, 9 pin. Listed: UL and CSA-Level3. Learn More

Power supply, switcher. +3.3VDC at 19.5Amps and +12VDC at 3Amp Max. 82Watt Max OUT - INPUT: 100-240VAC~2.3A 60/50Hz 6" x 4" x 1.3"High Weighs just under one pound. 2-pin Input and Three Terminal Output, prewired with Four +3.3V leads, Four Black Common leads and two +12V leads into 12-pin connector. Two pin Power Input - Beautiful NEW Switcher !!! UL-CE-TUV APL Approved.

Learn More

ASTEC - AA05A-024L-150S - Power Supply.

Input: 9-36V.

Output: 15V 5 watt.

Isolated Output.

Shielded.

Mount: PCB.

Operating Temp: -25 C to 71 C

Dimensions: 2" x 1" x 0.4" High, 4 leads.

Listed: UL.

Note: Double marked QA13-030-18 and MAS4030-8.

Learn More

GOULD - LMGT150/15 - 5V@20A 2X 12-15V@1.75A 

SWITCHER Power Supply

OPEN FRAME

Learn More

AULT INC - C39280-Z4-C73

250mA max thru 4-pin RJ-11 phone jacks.

Same as Siemens Optiset  E ITE Power Suppply

Model No. 69873
For Use With Optiset E Telephones Only

Use Cable 51A4871 (Included) 

P48-350250-A01RE

Input:120VAC 60Hz 160mA

Output: 2X35VDC 0.125A

Total Output: 0.25A Max

3-Prong Plug

Class 2

LR36665

PLEASE don't plug this into the wall outlet 120VAC [only 160mA] and plug Your phone into it, made special for OPTISET ''E'' telephones only.

Learn More

3P PACIFIC POWER PRODUCTS - KPT230C-49 Power Supply.

ATX 1U Computer switching

230W Max Out

+5V@25A, +12V@9Amp, +3.3V@15Amp and -12V +5Vsb @ 1Amp each.

Wire-Harness w/ 6 Molex Connectors.

IEC power cord receptacle input 120/230VAC 50/60Hz

AutoSelect.

Total power on +5 and +3.3V is 125W max, Fan Cooled.

Dimensions: Approximately 9" x 4" x 1.5".

Weight: 3.2 lbs.

New Old Stock

More Info: www.pcguide.com/ref/power/sup/partsMotherboard-c.html

Learn More

DC/DC Converter. Lanpac. Package: 1.25" square module, 5 pin. New. Learn More

Voltage regulator. Neg 5.2V 1.5Amp. Negative input/Negative output integrated switching regulator. Mount: PCB, horizontal. Package: 3 Pin with a two pin mount tab opposite side. Note: DC/DC Converter. Learn More

DC/DC 5V-In 28V@25MA Out -=- CONVERTER MODULE Learn More

DC/DC Converter. 1.5 Watt. Input: 5VDC. Output: 5VDC 150mA. Encapsulated. Case: 12 Pin PCB. New. Learn More

Inventronics - EUC-150S070ST - LED Driver, 150W Constant Current Type

The EUC-150SxxxST Series operate from a 90 ~ 305 Vac input range. These units will provide up to a 5.95 A of output current and a maximum output voltage of 428 V for 150 W maximum output power. They are designed to be highly efficient and highly reliable. The standard features include lightning protection, over voltage protection, short circuit protection, and over temperature protection.

Input Voltage / PFC: 90 ~ 305 Vac / 0.99 (typical)

Output Voltage: 128 ~ 214 VDC, 1.05A 150 Watt Constant Current

Ultra High 92% Efficiency

Active Power Factor Correction (0.99 Typical)

Constant Current Output

Lightning Protection

Fully encapsulated with waterproof IP67 level compliant

Reliability Protections: OVP, OTP, SCP

Safety Regulation: Comply with UL8750 & EN61347

MTBF: 300,000 hrs @ 25ºC, full load, 110 Vac input

Lifetime: 80,000 Hrs @ 110 Vac Input, 80% load, 25ºC ambient Temp.

 

 

 

Learn More

Inventronics - EUC-150S070STA - LED Driver, 150W Constant Current Type

The EUC-150S070STA LED Driver is a 150W, constant-current LED driver that operates from 90-305 Vac input with excellent power factor. It is created for high bay, tunnel and roadway lights. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature.

Input: 100-240VAC/277VAC.

Output: 107 - 214 VDC Output.

High Efficiency (Up to 93%)
Constant Current Output
0-10V Dimming Control
Input Surge Protection: 4kV line-line, 6kV line-earth
All-Around Protection: OVP, SCP, OTP
Waterproof (IP67) and UL Dry / Damp / Wet Location
SELV Output
TYPE HL, for use in a Class I, Division 2 hazardous (Classified) location
UL Type TL (Temperature Limited)

 

Learn More

WEHO - S-400-24 - Power Supply, DC, Switching. 400 Watt, 24 VDC, 17 Amp

Connect this unit to 110 or 220 Volts AC household power, and it will supply 400 Watts at 24 Volts DC and 17 Amps.

This power supply has been engineered specifically for use with DC motors. Most power supplies designed for use with LED lighting or other electronics will simply shut down when exposed to the high current demands of motors. Built-in current limiting protects the unit from overloads and short circuits. The current limiting feature enables these power supplies to keep functioning through the high-current start-up surges from motors. AmpFlow power supplies will just limit the current to the rated maximum even when a larger load is called for, (like when a DC motor starts up). Also, inductive loads (like motors) can cause damage to power supplies that are not designed for them.

These power supplies also work well in any application where AC line voltage needs to be converted to DC voltage. Other uses include LED lighting, HAM radio, battery charging, and replacing plug-in AC adapters when more power is required.

Short-circuit and overload protections help these units survive harsh operating conditions. The power supply shuts down temporarily if the temperature, current, or voltage goes beyond the safe operating range, and it starts up again automatically when the condition goes away – no rebooting is necessary.

This high-efficiency power supply has an output voltage that is adjustable by plus or minus 10%. It includes an EMI filter to minimize interference with radio signals and a soft-start circuit that reduces the AC inrush current peaks. Every power supply goes through a full-load burn-in test, so no defective unit leaves the factory.

DC output voltage: 24V

DC output current: 17A

DC output voltage error: ±1%

Ripple & noise: 150mV

Efficiency: 86%

AC input voltage range: 85-132VAC/170-264vac 47-63HZ 

Input current: 6.5A/115V 4A/230V

AC inrush current: Soft-Start Current 25A/115V 50A/230V

Leakage current: 3.5mA/240VAC

DC adjustable range: ±10% rated output voltage

Over load protection: 105-135% cut off the output auto -recovery

Over-voltage protection: 115-135 cut off the output auto -recovery

Setup rise hold up time: 200ms 50ms 20ms

Withstand voltage: I/P-O/P:1.5KVAC 1minute, I/P-FG:1.5KVAC 1minute, O/P-O/P:0.5KVAC 1minute

Withstand temperature: -10°C~+60°C,20%-90% RH

Dimensions: 8.5" X 4.5" X 2.0"

Weight: 1.05kg (2 Pounds)

This unit meets all the following safety and EMC standards: UL 1950, EN60950, EN55022, IEC100-3-2, CE, ROHS

Applications: Motor Controllers, CNC, Industrial Automation, LED Strip Lights, CCTV Power Supply , AC/DC Adapter.

Alternates: AmpFlow S-400-24, Meanwell 2-400-24, Mulview S-400-24, Mingwei S-400-24

Factory New

 

Learn More

5.0VDC OUT 0.6Amp OUT 3.0WATTS 12.0V-IN -Vin Negative Input Terminal+Vin Positive Input Terminal * +Vout Positive Output Terminal * -Vout Negative Output Terminal * NC No connection * COM Common * TRM TrimBody: 1.268" x 0.653" tall. Learn More

MULTI PRODUCTS - WA5121000/1

Power supply, DC. +5VDC 1000mA, 12VDC 150mA out.

Fully enclosed grounded 3 prong wall mount with 5 conductor cable and a 5 position (F) molex socket.

Input: 120VAC 60Hz 30 watt.

Dimensions: 3" x 4-1/2 tall x 2-5/16" deep.

For use with indoor only computer related equipment.

UL listed.

Learn More

Power Supply. Triple out DC, switching. Input: 115/220VAC 47-63Hz. Output: +5V 6.5Amp, +12V 4.7Amp (6.5APK), -12 1.7Amp(4.0APK). Learn More

Power supply. Output: 12VDC 2.1Amp. Input: 85-132VAC 47-440Hz or 110-165V 37 watt. Dimensions: 4-1/2" long plus 3/4" terminal strip x 3-3/4" x 1-1/3" high. Note: Used. Learn More

Power supply. Output: 5VDC 3Amp. Input: 85-132VAC 47-440Hz or 110-165V 23 watt. Dimensions: 3-1/2" x 3-3/4" x 1-1/3" high. Note: Used. Learn More

15VDC 3.5A Light Switching P/S new, in box 100~240V 50/60Hz 0.9A Input Learn More

International Power Sources - IHN24-3.6 - POWER SUPPLY

Output Power: 86 W      

Input Voltage: 100 VAC, 120 VAC, 220 VAC, 230 VAC to 240 VAC

Number of Outputs: 1 Output   

Output Voltage-Channel 1: 24 VDC          

Output Current-Channel 1: 3.6 A              

Mounting Style:Chassis

Dimensions: Length: 177.8 mm, Width: 123.7 mm, Height: 81.28 mm      

Open Frame/Enclosed: Open Frame       

Industry: Industrial         

Input Frequency: 47 Hz to 63 Hz

Brand: International Power        

Load Regulation: Regulated        

Product Type: Linear Power Supplies      

Unit Weight: 6.614 lbs

Proudly Made in USA

Learn More

INTER'L POWER - IHB12-1.7 - Power supply, DC. Linear

12VDC 1.7Amp 20watt

Input Voltage: 100 VAC, 120 VAC, 220 VAC, 230 VAC to 240 VAC,

Number of Outputs: 1, Output Voltage (Channel 1): 12V, Output Current (Channel 1): 1.7 A

Chassis mount open frame.

More info: http://www.internationalpower.com/cases.html#b

Learn More