Hydraulic & Pneumatic

Parallel Style Wide Opening Air Gripper 20mm-bore, Double Piston, Wide Opening, Two Fingers, 20mm Bore, Double Action, Operating Pressure: 0.1 ~ 0.6 MPa Effective Holding Force: 74N @ 0.5MPa - Bore Size: 20mm - Max Operating Freq: 40 C.P.M. - Opening / Closing Stroke: 100mm - Opening Width: 150mm - Closing Width: 100mm - Weight: 1690 grams - Learn More

ROTARY ACTUATOR 15-120 DEGREES IN 15DEG INCREMENTS 0.867"[22mm] SQUARE SHAFT. 82M-7R63 Series General Info: Drive:Right - Ports:1/4 NPT - Pounds:10 [ kg:4.6 ] - Clamping Force:3680 In-Lbs [420nM] - Inductive sensing module with LED display - DE-STA-CO Modell Nr 8PW-082-1 Learn More

Answer Engineering- Turn Act - TA-350-90-PN-8E-8T-400-A00-R82 - PN 122-111-04-20.

Turn Act Pneumatic Rotary Actuator - Special Clean Series Actuator - With Two Solid State Switches

3/4" shaft Two cables AC/DC Reed Switch.

Two 0.436" ID ports.

350-In-Lbs @ 100-PSI

210-In-Lbs @ 60-PSI

deg rotation 4.5-IN-3

Weighs 4.7 pounds.

Approximate Dimensions: 3" square x 7" long plus 1.75" 0.75" rusty keyed shaft.

Excellent condition but slight cosmetic rust on shaft from long term storage. 

Product line imay now be owned by Parker.

Additional Product  Line  Information: http://www.compactautomation.com/CorporateSite/media/itt/Resources/TechnicalData/Turn-Act_Products.pdf?ext=.pdf

Proudly Made in USA

Guaranteed not DOA.

 

Learn More

PARKER - CPOM3DDN – Hydraulic Pilot Operated Check Valve. Size: 3 - NFPA D05 Subplate Mounting Seal: N – Nitrile Cracking Pressure: Omit - 5 PSI Seals: Buna-N (Nitrile) Parker Division: Hydraulic Valve Division Pilot Operated Check Valve: CPOM Poppet Style: DD - Double Poppet A and B Ports Max Flow (at 3000 PSI): 20 GPM (77 LPM) Controlled Ports: A and B Port Series: CPOM Max Pressure: 5000 PSI (350 Bar) Subplate Pattern: NFPA D05 (CETOP 5, NG 10) Parker Group: Hydraulic Crack Pressure: 15 PSI Dimensions: Length 2.76”, Width 1.77” Height 1.57” Removed from Equipment – Excellent Condition Made in USA Learn More

NORGREN - RM/55463/M/50 - Cylinder, Roundline.

Magnet piston as standard – provides a wide range of control options

Attractive clean- line design – enhances installation appearance

Threaded rear end covers on ∅ 32 mm to ∅ 63 mm simplify mounting

Threaded fixing holes in both end covers – increased mounting versatility

Actuator. Single ended.

Dimensions: 63mm.

Piston rod material: stainless steel (Martensitic).

Strokes: 50mm.

Series A.

New Old Stock 

Note: Cosmetic Scratch from bulk storage.

Learn More

NORGREN - L64M4APQDN - Lubricator, Micro-Fog.

Olympian Plus plug in design

Constant oil density output with varying flow

Easy fill with quick release bayonet bowl

High visibility prismatic sight glass

Use Micro-Fog models in applications with one or more points of lubrication.

Use Oil-Fog models to lubricate a single tool, cylinder or other airdriven device.

250PSIG 17 Bar max.

Port size: 1/2".

Temperature: 170 Deg F / 80 Deg C max.

Note: Marked L64M-NNP-QDN.

Factory New

Learn More

NORGREN - K79DA00KS6KV2 - Directional Control Spool Valve.

Nugget 200 Directional Control Spool Valve.

Long Lasting Spool Design

High Flow Compaact Valve

110 50Hz/120V 60Hz 8VA.

Vacuum to 150PSI.

Operating Temperature: 120 Deg F.

New

Learn More

NORGREN - B64G4AKAD3RMN - Filter Regulator Assembly.

Port Size: 1/2" (0.50")

Flow† scfm (dm3/s): 225 (106)

Inlet: 250 PSIG 17 Bar.

Range: 6-150 PSIG -.4 - 10 Bar.

Temp: 175 Deg F / 80 Deg C.

Weight: 3.69 il (1.55kg)

Replacement Element: 4338-01 um

Olympian PLUS Plug-in System.

Effective liquid removal and particulate filtration

Large filter element area provides minimum pressure drop

High flow unit with large valve and diaphragm

Push to lock adjusting knob with tamper resistant option

New

Learn More

DESTACO - 82M-7L63C80-NA - Parker P82M63-3200 - Pneumatic Power Clamp Actuator Dual Shaft with Turck BDS-2AP6X3-H1141/S34 ProXimity Sensor, 2mm Sensing Distance,

Pneumatic power clamps provide automotive and sheet metal processing customers with superior holding power in a versatile, user-friendly and low-maintenance package. 

Heavy Duty Industrial Clamp

Equivalent Diameter: 63 mm

Stroke: 90 mm

Operation Range: -10C to 80 C

Max Inlet Pressure: 8 bar

With Optional Inductive Proximity Sensors and LED Indication Turck Ni-K09-o,095/0,11 - BDS-2AP6X3-H1141/S34

10-30 VDC 150 mA

Approximate dimensiuons: 16" X 6" X 6", 11 Pounds

Made in Brazil / Proudly Assembled in USA

Lightly Used , Removed from Equipment and in Excellent Condition.

Learn More

Pneumatic Clamp. Learn More