Hydraulic & Pneumatic

ASCO - Automatic Switch Co - Model - HV1744762 - Red Hat Solenoid.

Small 3-way solenoid operated valve with all three pipe connections located in the body. NEMA Type I Solenoid Enclosure. Valves are equipped with a NEMA Type 4 Watertight Enclosure. 

Commercial - General Purpose

Body Design: 3 Way Solenoid Valve

Coil Voltage: 120VAC/60Hz, 110VAC/50Hz

Coil Type: B94, P/N: MP-C-011, 099216-005D, 2 Wire.

Wattage: 10.7 W

Solenoid Enclosure: Watertight

Pressure: 15 PSI Air, Inert Gas & Water.

Material: Brass Valve

Maximum  Fluid Temperature: 200 F

Approximate Lead Length: 18"

1/4" PIPE Three-Way Operation: Normally Open & Normally Closed.

Uses Rebuild Kit 174889 D-7240 DS-796

Dimensions: 45x37x91mm High Including Coil.

Coil: 35x40mm Int. 120V 60Hz 10.7W Ind.

Boxed with Instructions - New Old Stock.

A 726048003 CSA

Proudly Made in USA

Learn More

Cylinder, SS. Stainless steel. 3" Stroke, vacuum actuation. Dimensions: 1.5" D x 9" long, 3/4" threaded bushing. Learn More

FLAT II Stainless Steel Body Cylinders Learn More

SUN HYDRAULICS - XICA-XXV - Hydraulic Catridge,

All Ports Blocked Cavity Plug T-16A

F0833/104625

Mark Number 56059

416579

Cartridges

Corrosion Resistant

Cavity Plugs

2 Port, All Ports Blocked.

5000-psI Series-3

Learn More

Cylinder, air. 4 inch 100mm stroke. 145PSI-max 1.77 x 2.0 x 6.4"L including threaded shaft & nut. Learn More

Schroeder Industries - 8ZZ5 - Filter Element

Micron Rating: 5 Microns Absolute

Dimensions: OD Top: 3.115, OD Bottom: 3.115, ID: 1.64, Length: 8.18

End Caps: Corrosion Resistant Steel / Aluminum

Center Tube: Corrosion Resistant Steel

Media: Microglass Fiber Media

Seal: Buna (Nitrile)

Bypass Setting: -

Collapse Rating: 450 psid

Filtration Rating: Bx = 200 Bx[c] = 1000

Hydrafil# : BF-SCH-623746-L8-6MB

Sealed - New in Box.

Learn More

Volume Booster Relay, Proportional. Ratio: 1:1. Adjustable Bias +18, -10-PSIG. Supply pressure: 30-nominal 60-PSIG max. Input pressure range: 0-20-nominal, 0-50-PSIG max. The CR101A1 is a proportioning unit designed for pneumatic control where the application requires amplifing the volume of control air or biasing of the control air pressure. New, in box with instruction since early seventies. Learn More

Compressed gas regulator UL-650L max inlet 150psi and 0-60psi / 0-400kPa USG gage. 2.5 lbs. Learn More

Welker gold-line shot pin 75mm stroke. "The mounting surface for the shotpin must be flat within 0.05mm (0.002") 80.6mm[3.176] square x 21"long - Cylinder: WCP-002 Bore: 63mm Stroke: 75mm. Weight: 21 lbs. General Info: (Rap or Rigid coupler) - Double rod, Extend stop or Retract stop available. Learn More

PARKER HANNIFIN - Hydraulic Filter Division - 932340Q 10QYM

Hydraulic Filtration Element 3.10" OD x 8.10" Length.

inner Diameter: 1.690"

Filter Type: Pleated Synthetic Elements

Filtration Selectivity Raring: 12 MICRON ABSOLUTE (B12=200)

Maximum Flow: 60 GPM

Operating Temperature Range: -45 TO 225 F

Initial Differential Pressure: 6 PSID

Center Tube: ZINC PLATED CARBON STEEL

End Caps: CARBON STEEL

Hydraulic Filter Div of Parker Hannifin in Metamora OH.

Proudly Made in USA

Alternates: P 031081-3S61, Luber-Finer LH95105V, Carquest 84852

Learn More

Norgren Fluidics  - 4LD-010-D00+ - 4LD-010 - Check Valve, Miniature.

A check valve is the simplest type of directional control valve used in hydraulic systems. Check valves stop the flow of fluid in one direction and allow free flow in the opposite direction. They are also known as non-return valves. Check valves may be used as prefill valves, bypass valves, pre-tensioning or protection of hydraulic components against pressure surges.

Extremely low crack pressures 10-32 UNF or barbed tube connections Direct in-line mounting Control flow direction in medical equipment, instrumentation systems, and in miniature pneumatic control systems.

Duckbill type check - Non-venting

Material: Body - Aluminum, Duckbill - Epichlorohydrin

Crack Pressure: 8" H2O (Pressure required to produce .001 scfm (28.3 cc/m) forward air flow)

This check valves has a 200 x 200 mesh, stainless steel inlet filter screen to protect the duckbill.

Furnished with two adapters for use with 1/16" ID flexible tubing.

Connection: 10-32 UNF.

Tube Connection.

Genuine Norgren Fluics - New Old Stock

Proudly Made in USA

Learn More

Noshok - PGL-C-63-N-C-300 - Gauge, Pressure.

0-3000PSI / 0-20000kPa.

Glycerin Filled.

Connection: 1/4" NPT Threaded Shaft.

Dimensions: 2.5" D x 2.5" high x 1.333" deep.

New - Manufactured in Germany.

Learn More

FABCO-AIR - J-5-X - Pancake Cylinder.

Double-acting pneumatic cylinder actuator with single rod - Fabco-Air (Pancake original series) - 1/2" (B1/2") bore - 1-1/2" (S1-1/2") stroke - #8-32 UNC-2B female threaded rod-end - 2 x #10-32 UNF-2B threaded pneumatic ports - rated for -25...+250°F / -31...+121°C ambient - round cylindrical shape - clear anodized Aluminium body / hard Chrome-plated stainless steel piston rod / standard Buna-N seals - through-hole mounting - rated for 12psi...250psi

Bore size: 2.7mm, 1/2" (B1/2")

Stroke length: 1-1/2" (S1-1/2")

Functions: Double-acting pneumatic cylinder actuator

Design: Single rod

Pressure: 12psi min.- 250psi max.

Shape: round cylindrical

Connection type: 8-32 UNC-2B female threaded rod-end, 2 x #10-32 UNF-2B threaded pneumatic ports

Mounting mode: Through-hole mounting

Material: Clear anodized Aluminium body, Hard Chrome-plated stainless steel piston rod, standard Buna-N seals, Duralon-lined fiberglass rod bushing, 303 stainless steel shaft, pre-lubricated with Magnalube-G grease

Port: 1/8" NPT.

Ambient and media temperature: -25 -250 deg F.

Stroke tolerance: +/- 1/64".

Learn More

FABCO-AIR - E-5-X - Pancake Cylinder.

Double-acting pneumatic cylinder actuator with single rod - Fabco-Air (Pancake original series) - 1/2" (B1/2") bore - 1/2" (S1/2") stroke - #8-32 UNC-2B female threaded rod-end - 2 x #10-32 UNF-2B threaded pneumatic ports - rated for -25...+250°F / -31...+121°C ambient - round cylindrical shape - clear anodized Aluminium body / hard Chrome-plated stainless steel piston rod / standard Buna-N seals - through-hole mounting - rated for 12psi...250psi

Port: 1/8" NPT.

Ambient and media temperature: -25 -250 deg F.

Stroke tolerance: +/- 1/64".

Bore size: 2.7mm 1/2" (B1/2")

Stroke length: /2" (S1/2")

Functions: Double-acting pneumatic cylinder actuator

Design: Single rod, rubber bumpers (both ends)

Pressure: 12psi min., 250psi max.

Shape: Round cylindrical

Connection type: #8-32 UNC-2B female threaded rod-end

2 x #10-32 UNF-2B threaded pneumatic ports

Mounting mode: Through-hole mounting

Material: Clear Anodized Aluminium body, Hard Chrome-plated stainless steel piston rod, standard Buna-N seals, Duralon-lined fiberglass rod bushing, 303 stainless steel shaft, pre-lubricated with Magnalube-G grease

Learn More

NEW with bag o' gaskets & 3 screws. http://www.airlinehyd.com/APOLLO/SMC/VQ4000.PDF Learn More

Schroeder Industries - FZX3 - Excellement 2000-Series Beta-x

-/>200 Synthetic Microglass Filtration Media

3-Micron

Pleated Microglass Media

3-inch Nominal Length

High Collapse Pressure: 3045 PSI.

ISO 9001:2015 Certified.

Proudly Made in USA.

Learn More

Numatics - 215-172A - 215-172A-12-84 - Pneumatic Pressure Regulator.

Numatics Pressure Regulators are designed to control the pressure in compressed air lines. They provide consistent pressures; they remove fluctuations in the air supply and are adjustable. 

Sandwich Dual Air Regulator

Mounts between the valve and subbase.

New Old Stock

 

Learn More