Specialized

Universal Quad Spark Igniter. Replacement igniter for Weber, and numerous other grills.

This genuine OEM sourced ignition Module is specially designed for Weber grills. The electrode is used to create an electric arc on the burner and this ignites the fuel that is emitted by the burner. 

OEM Quality, Uses a Single 1.5V AA Battery, Has four (4) male spade terminals, Requires a 15/16" mounting hole. Easily convert nearly any grill requiring 1 to 4 ignition points. Push and hold button for continuous sparking. Includes Ignition Module, Push Button Lock Ring and Heat shield.

When using as a replacment for other grills, check below dimensions to ensure clearance. 

Dimensions: 3.75" Depth X 3.25" Width X 2.5" Height.  (Entends 1.9" deep behind front panel minus connecting cables)

Module has four (4) outputs. Use 1, 2, 3 or all four.

Alternate P/Ns 88826, 66836, 03341, MCM040334113, MCM03341, IGEIB9B, 040334113, SPM8781331523, SPM8990392123, ISH09-M994317, ALVB00L4, 567139586, 567280242,7628, 7629.  

Direct fit for following Weber models:

• Fits Weber 56514, 6511001, 6511301, 6512001, 6519009, 6519399, 6522301, 6531001, 6532001, 6532301, 6550001, 6570001, 6631001, 6631301, 6670001
• Fits Weber Genesis Series 300 gas grills
• Fits Genesis Series E310/E320/E330 Grills (2011 and Newer) with Front Mount Control Knobs.
• This kit is a perfect replacement for the 3-burner Genesis with the dials on the front.
• Durable and Lasts Longer, Universal Spark generator BBQ Gas Grill Replacement
• Requirers "AA" Battery (Battery not included)
• Electronic Ignitor Module, Reignite an old grill

TRW PT6702, NEW UHF Transistors GOLD

Semiconductor Material: Silicon
Terminal Type and Quantity: 4 ribbon
Overall Length: 0.230 inches maximum

NSN 5961-00-449-3337

DLA900-81-C-3644

Unidentified MFG - 9-112 Back At-ya Mirror - First Surface Mirror.

A first-surface mirror or front-surface mirror (also commonly abbreviated FS mirror or FSM) is a mirror with the reflective surface being above a backing, as opposed to the conventional, second-surface mirror with the reflective surface behind a transparent substrate such as glass or acrylic. Afirst surface mirror typically reflects 94 to 99%.

3-Sided for Lasers.

Reflects laser light back at emitter.

3 Mirrors Mounted on a Funnel Shaped Mount.

Dimensions: 73mm wide x 56mm tall.

Three threaded mounting holes on bottom, 2" centers.

Minor scratches on mirrors from storage in paper.

Applications: First Surface mirrors are primarily used for projecting clear sharp images in applications such as: Flight Simulation, Reflecting Telescopes, Kaleidoscopes, Periscopes, Laser, and Medical imaging.

Picker/Philips X-RAY - 350953 - Jumper Cable, 74868 - RG-11/U Coax Cable, UG-573A/U RF N Connector Male to Male. 24 inch length.

Highest Quality Heavy Duty Medical Grade Coax Cable, Used/Removed from Equipment. 

Laird Thermal System - MARLOW INDUSTRIES - CP2-31-10-L-1.

Ceramic Plate Series Thermoelectric Cooler - The CP2-127-10-L1 is a high-performance and highly reliable standard Thermoelectric Cooler. Assembled with Bismuth Telluride semiconductor material and thermally conductive Aluminum Oxide ceramics. 

Thermal electric cooler. Peltier junction's 3Amp 2.5V.

Dimensions: Approximately - 30mm sq x 5.3mm tall, (29.7mm x 29.7mm x 4.7mm).

MFG Part Number 40655-202.

New Old Stock. 

• Thermoelectric Coolers for Reagent Storage
• Thermoelectric Coolers for Handheld Cosmetic Lasers
• Cooling for Centrifuges
• Heads-Up Displays, Imaging Sensors
• Peltier Cooling for Machine Vision

Endicott Research Group ERG - E505-.4050U DC/DC Converter.

ERG’s E505-.4050U is a 500 Series DC-DC converter that converts a 5 VDC input voltage to 40 VDC@ 50mA, unregulated. There are many custom variations within each Series.

5VDC to 40VDC 50mAmps DC -DC CONVERTER

E 500 Series Unregulated Encapsulated

New 5-Pin module PCB Mount

Overall Dimensions: 1.4" (35.7mm) wide x 1" (25.4mm) deep x 0.777" (19.7mm) tall.

Additional Information: http://ergpower.com/pdf30/DC_DC_Converters.pdf 

Applications: The voltage needed could be for any number of applications, such as an ink jet printer used for CAD drawings or medical data where each jet needs 40 VDC to operate and that voltage is not in the system; so a DC-DC converter can be installed to convert 12 VDC to 40 VDC for each jet. Other applications that ERG’s DC-DC converters are used for include fuel pumps, test equipment and many others.

Proudly Made in USA

BEMAN - MP-6 Resistor, Ceramic.

Resistance: Precision 1090Meg Ohm.

Power: 6 Watt.

Tolerance: 2%.

Voltage: 30KV. Glass-like. Spiral Wound. Precision.

Dimensions: 5/16" D x 6" long.

Alternates: Heath Kit P/N 2-47, RCA WG-206, BE1090

New Old Stock

Additional Information: https://www.utm.edu/staff/leeb/Probe.pdf

Application: Fits Heathkit Model 336 and RCA WG-289 or WG-297 High Voltage Probes and others.

Note: Handle the 1090 resistor with care, very fragile.

Aerotec - UD-122 - Differential Pressure Switch

Differential Pressure Switch AF33(600)-24272

Factory - New Old Stock

Military S/N 1204.16-R 3360 - 072834531

AF33 (600)-24272

Packaged: MIL-B131B Class 2

Western Electric - L4BY-03-10C - Telecom.

Telephone system, stretch phone patch cord with WE-464A dual 1/4" plugs and 8' coiled stretch cord to WE-240A belt clip with locking switch with another 3' cord with four conductors, black.

Genuine Vintage Western Electric - New Old Stock

No phone or headset included.

Western Electric - 241A Switchgear Connector.

Dual Mono Male Plugs, 1/4" (6.35mm) 

Material: Heavy Duty Solid Brass.

Screw Terminals - Brass "T" Cable Clamp.

Authentic Vintage Western Electric - New Old stock

Alternate: 100395235

Complete with hardware.

CS2223M1 Power Supply Board, High Voltage, 15K VDC.

Approx 15,000VDC no load.

Current: Unknown.

Input: 120VAC.

Dimensions: 5 x 4 x 1" tall.

Red & Black #22 XLPVC Leads good for 20KVDC.

Note: Very nicely made.

ANSELL AlpaTec SOL-VEX - 37-175-11 - 15 Mil Gloves, green Nitrile. Size11. Package of 12 Pr.

Applications: Chemical Plants and Transportation, Chemical Processing, Oil Refining and Petrochemicals, Cleaning and Degreasing, Exposure to Chemicals, Solvents, Hazardous Liquids, PVC Cements or Standing Water, Janitorial and Maintenance Work

Gloves, Green Nitrile. Size: 11.

Flock-lined, Straight cuff.

Sandpatch Grip Design.

12 - 13" Length.

15.00 mil Thickness. ANSI/ISEA Puncture Level: 3

Industry Standards: ANSI 0 (Cut), EN388 3101, EN374 AKL, EN374 Micro, FDA 21 CFR 177.2600   

High performance Nitrile - Reliable chemical protection. Reduced chemical burns and caustic exposure. Puncture and abrasion protection. Reduced hand injuries. Cotton flock liner - Moisture absorption, Reduced dermatitis and increased comfort.

Component Materials Comply with 21 Cfr 177.2600 for Food Contact

Marked: For protection against OTTO Fuels.

USDA Accepted. FSN: 8415-01-147-6263.

Package of 12 Pr.

L-COM - CSMN9MF-5 -  Computer Related.

DB9 Female to DB9 Male Extension Cable.

Each End with Hood and Hold Down Screws.

Molded. Cable is 26-9C (26AWG 9 Conductor)

300V VW-1, AWM style 2464.

Length: 5 Foot. (1.5m)

Jacket: Grey

Operating Temperature: 80 Deg C.

RoHS Compliant.

New, Individually Packaged.

Alternate: Newark 28H8872, Allied 70126648

Applications: Communications & Networking, Test & Measurement, Power Management

ASTEC International - UM1291-1 - RF Modulator RF Modulator. 

Enclosed unit containing National Semiconductor LM1889 TV Video Modulator.

Dimensions: 4" long x 2-3/16" deep x 1-1/3" high.

Direct Replacement for FR Modulators used in Bally/Astrocade Arcades. Please see our large selection of cooling fans which can be used to greatly improve cooling and reliability of video consoles.

Unit Schematic and related information available by searching ASTEC UM1291-1 and National Semiconductor LM1889.

Genuine New ASTEC UM1291-1.

TE Connectivity AMP INC - 555414-1  Adapter, 8-Position RJ45

M/JK to 4-Position data connectorModular jack adapter Compatible to ICS-45-CA.Modular interface connector to 150-Ohm shielded twisted pair data connector.

Conn Data Connector/Modular Jack Adapter 4/8 POS ST 1 Port

See SKU 4659 for RJ11 Cord.

MSA - 7-201-1 - 460968 - Comfo II Custom Respirator Facepiece - Black, Size Medium

The 460968 Half Mask Respirator is constructed of Hycar rubber with an elastic band.  

Respirator, Face Piece - New Old Stock

Comes with 60 page manual.

Price is for one (1) Comfo II Respirator Facepiece without filter cartridges. 

See SKU 32215 for MSA - 459322 - Comfo Respirator Filter Cartridges P100, Type H

Western Electric - REP 202A - 202A - Telephone, Repeat Coil / Transformer.

Enclosed.

Contacts. 6 x 2 solder.

Dimensions: 1.721" long x 1.231" wide x 3.642" high plus contacts.

Genuine Vintage Wester Electric  - New Old Stock