Military Switch

Honeywell/Microswitch - PTY2091 - PUSH / PULL 2-Position Maintained Switch Assembly Model-B

2 Position Maintained Contacts

Industrial, Full Voltage

Applications: Safety Emergency Stop/Start Switch

In Manufactures Packaging with Installation Instructions

UL CSA Approved

Note: Lens Cap Purchased Separately

Alternates: Senasys PTY2091, ITT G330207-1, NSN 5930-01-244-0512

Proudly Made in USA

Learn More

Cutler-Hammer / Eaton - 8448K2 Switch, pushbutton.

DPST NO Momentary 15Amp 125VAC/10Amp 250VAC.

Bushing diameter: 0.461".

Threaded bushing length: 0.344".

Actuator length: 0.219".

Mount: panel.

Dimensions: 1.329" long x 0.743" wide x 0.766" high plus contacts.

Termination: 4 screw terminals.

Complete with hardware.

Learn More

Switch, toggle. 3PST 15Amp 125VAC/10Amp 250VAC, 3/4HP 250VAC. No bat. Mount: panel. Contacts: 6 screw terminals. Listed: UL. Learn More

Vibtage Aircraft Eaton Cutler Hammer AN3023-3, 8710K14 Toggle Switch, Contacts: DPDT. Contact Ratings: 15Amp 115VAC. Actuator: On-On. Connection: Screw terminals. Mech: Panel, 2 hole flange, 2.114" (53.7mm) long x 1.261" (32.0mm) wide) with 1.8" (45mm) centers. Body: 36.7mm long x 37.2mm wide x 34mm deep behind panel. Note: Heavy duty, aircraft switch. Operation: maintained. Double marked:AN3023-3 and ST55N.

Learn More

CUTLER-HAMMER - MS35058-31 - 8809K16 - JBT58 - Switch, Toggle.

Eaton’s military purpose switches are designed to meet the requirements of MIL-S-83731. Sealed Switches have a silicone rubber lever seal assembled between the lever and the bushing to resist the entrance of contaminants such as dust, sand or water into the contact structure. The switch mechanisms are completely enclosed to resist the entrance of contaminants into the switch. All metal parts are plated to resist corrosion. The heavy duty switches are offered in both standard toggle lever and lever lock versions. Circuit designations are stamped on the side of each switch.

SPDT On/Off/ON(Mom), 3 pos.

Double marked JBT58, Formerly Known as ST42H.

Maximum voltage: 220VAC/250VDC.

Threaded bushing length: 0.505".

Actuator: sealed 0.663" long.

Dimensions: 1.132" long x 0.627" wide x 0.664" high.

NSN 5930-00-655-1523

Contacts: 3 screw terminals. 

 

Learn More

Eaton CUTLER-HAMMER - 8690K11 - Switch, Toggle.

DPDT, 2 position, 15Amp 125VAC/10Amp 250VAC.

One Hole Panel Mount.

Dimensions: 2.5" long x 1.158" wide x 1.055" high. 0.95" behind panel.

Contacts: 6 screw terminals.

New Old Stock

Alternate: TE Connectivity 8690K

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 3Amp 250VAC. Connection: wire leads. Mech: Panel, bushing. Panel hole: 1.008" long x 0.516" wide. Note: Standard 3/8" D bushing x 0.473" long. Learn More

Cutler-Hammer / Eaton - 8652K1 Switch, lever.

DPST, Normally Open,

20A 125VAC/10A 250VAC, 1-1/2HP 250V, 1HP 250VAC.

Momentary, with Integral Retain-On pin, Overahanging tool, Metal Delrin Trigger/Actuator.

Dimensions: base 2.250" long x 1.009" wide x 0.751" high.

Overall with lever 3.5" wide x 2-1/16" high.

Terminals: 4 screw contact.

Complete with screws.

Made in USA

Learn More

Eaton CUTLER-HAMMER - MS35058-26 - 8804K13 - Switch, toggle.

SPDT On/ON(Mom).

Double marked 8804K13.

Maximum voltage: 220VAC/250VDC.

Threaded bushing length: 0.513".

Actuator: sealed 0.675".

Dimensions: 1.14" long x 0.647" wide x 0.618" high.

Contacts. 3 screw terminals.

Learn More

Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC. Actuator: On-Off (Ctr). Connection: screw terminals. Mech: panel mount, bushing. Body: 1.338" long x 0.750" wide x 0.757" high plus terminals. Bushing: 3/8" D x 0.480" long. Shaft: 0.650" long. Note: Military double marked MS35059-24, NSN 5930-006362821. Learn More