Military Switch

Honeywell/Micro Switch - 104TL226-5 Switch, Toggle.

4PDT (Mom) On/None/Off.

125VAC 7.5Amp/250VAC 6Amp.

Resistive DC: 125V 0.75Amp/250V 0.5Amp/28VDC 7.5Amp.

Inductive load: 125VAC 7.5Amp/28VDC 7.5Amp.

Termination IWTS (16-20AWG) MIL-S-3950.

Threaded bushing length: 0.432".

Actuator length: 0.643".

Operating temperature: -85 to 160 Deg F.

Terminals accept pins M39029/1-101, not included.

Note: Military. Environmentally sealed shaft.

Learn More

Honeywell - Micro Switch - 104TL1-72 -Switch, Toggle / Rocker

Contacts: 4PDT.

Contact Ratings: 0.75 A at 115 Vdc,0.5 A at 250 Vdc,0.5 A to 20 A at 0.5 Vdc to 28 Vdc,0.5 A to 15 A at 0.5 Vac to 277 Vac.

Actuator: (On) On (On) = (Mom) On (Mom).

Mech: Bushing 15/32 in.

Operating temperature: -85degF to +160degF.

Note: Environmentally sealed switch, completely sealed switching chamber, high strength, temperature resistant, non-tracking case, material and silver cadmium oxide contacts.

Military qualified MS27724-3.

Contacts: IWTS (14-16AWG) termination.

Double listed as MS27724-3 SKU 133204

Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 2Amp 115VAC 60Hz (Res load), 4Amp 28VDC (Res load), 1Amp 115VAC 60Hz (Inductive load), 1Amp 28VDC (Inductive load). Actuator: On-On. Connection: PC Leads, tarnished, cleanable. Mech: PCB. Note: Military double marked MS21354-231. Military NSN 5930-010433006. New, complete with hardware. Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 15A/125VAC 0.5HP, 10 Amp 250VAc. Actuator: On-None-Off. Connection: solder terminals. Mech: PCB, bushing is threaded. Body: 1.121" wide x 0.631" deep x 0.619" high. More info: page 154 http://www.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/pg07002001e.pdf Learn More

Eaton - Cutler-Hammer - AN3023-9 - 8713K14 Switch, Toggle.

Contacts: DPST.

Contact Ratings: 20Amp.

Actuator: On-Off(Mom).

Normally Closed.

Connection: Screw Terminals.

Mech: Panel with 2 holes 1.85" centers.

Body: Flange 2.123" long x 1.262" wide x 0.046" thick.

Overall 2.123" long x 1.5" wide x 0.953" high plus contacts.

Note: Double marked AN3023-9 and ST55L.

NSN: 5930-00-548-5328

Genuine Vintage Cutler Hammer - New Old Stock

Made in the USA.

Learn More

Honeywell/Microswitch - PTY2091 - PUSH / PULL 2-Position Maintained Switch Assembly Model-B

2 Position Maintained Contacts

Industrial, Full Voltage

Applications: Safety Emergency Stop/Start Switch

In Manufactures Packaging with Installation Instructions

UL CSA Approved

Note: Lens Cap Purchased Separately

Alternates: Senasys PTY2091, ITT G330207-1, NSN 5930-01-244-0512

Proudly Made in USA

Learn More

Cutler-Hammer / Eaton - 8448K2 Switch, pushbutton.

DPST NO Momentary 15Amp 125VAC/10Amp 250VAC.

Bushing diameter: 0.461".

Threaded bushing length: 0.344".

Actuator length: 0.219".

Mount: panel.

Dimensions: 1.329" long x 0.743" wide x 0.766" high plus contacts.

Termination: 4 screw terminals.

Complete with hardware.

Learn More

Eaton - Cutler Hammer - 7691K14 Switch, Toggle.

4PST 15Amp 125VAC/10Amp 250VAC, 3/4HP 250VAC.

Threaded bushing 3/8" x 0.463".

Actuator: 0.687" long.

Mount: Panel. Heavy duty.

Termination: 8 solder terminals.

Complete with hardware.

Learn More

Switch, micro. With roller. Two (2) position, one NO, one NC, 10Amp 125/250VAC. Learn More

Switch, toggle. 3PST 15Amp 125VAC/10Amp 250VAC, 3/4HP 250VAC. No bat. Mount: panel. Contacts: 6 screw terminals. Listed: UL. Learn More

Cutler-Hammer / Eaton - 8788K5 - MS25072-8 Switch, toggle.

SPDT Off/ON(Mom). Heavy duty.

Plate Design: Toggle Switch

Switch Style: Toggle/Joystick

Termination: Type Screw

Contact Material: Brass

Features: Heavy Duty

Maximum Amperage: 20 A

Color: Black

Double marked 8788K5.

Mount: Panel. Two hole mount with 1.792" centers.

Dimensions: 2.147" long x 1.152" wide x 2.535" deep (behind panel).

Contacts: 3 large stud terminals.

Genuine Cutler Hammer - New Old Stock

Learn More

Cutler-Hammer / Eaton * - 8373K8 - Switch, Toggle.

DPST 6Amp @ 125VAC, 3Amp @ 250VDC.

Threaded bushing: 3/8" x 0.355".

Actuator: 0.50".

Dimensions: Overall 1.153" long x 0.687" wide.

Termination: 6 Solder Terminals.

Genuine Cutler Hammer - New Old Stock

Military NSN 5930-00-259-8341.

Learn More

Switch, toggle. DPDT 2 Position 6Amp 125VAC/3Amp 250VAC. Threaded bushing 3/8" D x 0.349" long. Actuator: Bat 0.68". Material: plastic. Mount: panel. Dimensions: 1.172" long x 0.694 wide. Termination: 6 solder terminals. Complete with hardware. Learn More

Safran - Eaton - CUTLER-HAMMER - 8636K2 - Switch, Trigger.

DPST Momentary 16Amp 125VAC/DC, 8Amp 250VAC/DC.

1HP 125VAC/DC.

Tool Handle, Snap Switch, Lockable.

Trigger: Metal.

Mount: 2 Screw.

Termination: 4 Screw.

Dimensions: Length 1.329"

Type: Military Style

Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 15A 125VAC. Actuator: Center-Off. Pull-to-switch. Momentary both sides. Connection: Screw terminals with screws, black dress nut, washer, nut and locating ring.. Mech: panel mount. Note: Must Pull-to-switch either side. Aircraft-instrument, military-purpose style. Lever lock with lever seal. Learn More

Cutler-Hammer / Eaton - 8906K4919 Switch, Toggle.

Contacts: SPDT.

Contact Ratings: 15A 125VAC.

Actuator: Momentary-both-sides, Must Pull-to-switch One side only.

Center-Off. Lever

Lock with Lever Seal.

Connection: Screw Terminals with black dress nut, washer, nut and locating ring.

Aircraft-Instrument Military-Purpose Style. (Pull-to-switch On) / Off / (On).

Learn More

Switch, toggle. Contacts: 4PST. Actuator: Off-(On) = momentary. Connection: 2 screw terminals. Mech: 3/8" threaded bushing. Note: Weather proof / oil sealed shaft. Double marked 8838K11. Learn More

Cutler-Hammer / Eaton - MS25125-9 Switch, Toggle.

Contacts: SPST.

Actuator: ON-OFF.

Connection: 2 screw terminals.

Mech: 3/8" threaded bushing.

Note: Double marked 8857K21.

Learn More

Vibtage Aircraft Eaton Cutler Hammer AN3023-3, 8710K14 Toggle Switch, Contacts: DPDT. Contact Ratings: 15Amp 115VAC. Actuator: On-On. Connection: Screw terminals. Mech: Panel, 2 hole flange, 2.114" (53.7mm) long x 1.261" (32.0mm) wide) with 1.8" (45mm) centers. Body: 36.7mm long x 37.2mm wide x 34mm deep behind panel. Note: Heavy duty, aircraft switch. Operation: maintained. Double marked:AN3023-3 and ST55N.

Learn More

Switch, toggle. Contacts: 4PDT. Contact Ratings: 15Amp 115VAC. Actuator: On-On-On. Connection: Flush terminal screws. Mech: Panel, bushing 15/32". Body: 41.8mm long x 33.5mm wide x 32.0mm deep behind panel. Note: Environmentally sealed switch (watertight). 20,000 Operations at rated load. Threaded bushing length: 12.1mm. Actuator length:17.3mm. Complete with hardware. Learn More

Tyco ALCOSWITCH - MSS 2450 - Switch, slide. DP4T-300mA 4-Position, Instrument Grade

Contacts: DP4T. Make before Break

Contact Ratings: 300mA 125VAC.

Actuator: 4-position.

Connection: Epoxy sealed with silver plated contacts.

Mech: PCB with mounting tabs on perimeter of frames.

Body: 0.38" x 0.95"L x 0.6" plus 0.37"L slide.

Tyco Electronics P/N - 5-1437580-7, Alcoswitch P/N - MSSA2450

NSN# 5930-01-081-4757

Learn More

JBT - MS35059-26 Switch, Toggle.

Contacts: DPDT.

Actuator: On (Mom) - On.

Connection: screw.

Mech: Panel.

Panel hole: 1.345" long x 0.766" wide x 0.813" high, plus contacts.

Standard 15/32" threaded bushing x 0.460" long.

Note: Complete with hardware.

Environmentally sealed switch.

Made in USA

NSN 5930-00-615-7880

Learn More

Switch, toggle. Contacts: DPDT MOM.(N.C.). Contact Ratings: 15Amp 125VAC. Actuator: On-(Off). Connection: screw terminals. Mech: Panel, bushing. Panel hole: 1.34" long x 0.78" wide x 0.738" deep, plus terminals.. Note: Standard 3/8" D bushing x 0.467" long (0.647" long seated). Actuator extends 0.705". Up position MOM. Double marked 8828K25. Learn More

CUTLER-HAMMER - MS35058-31 - 8809K16 - JBT58 - Switch, Toggle.

Eaton’s military purpose switches are designed to meet the requirements of MIL-S-83731. Sealed Switches have a silicone rubber lever seal assembled between the lever and the bushing to resist the entrance of contaminants such as dust, sand or water into the contact structure. The switch mechanisms are completely enclosed to resist the entrance of contaminants into the switch. All metal parts are plated to resist corrosion. The heavy duty switches are offered in both standard toggle lever and lever lock versions. Circuit designations are stamped on the side of each switch.

SPDT On/Off/ON(Mom), 3 pos.

Double marked JBT58, Formerly Known as ST42H.

Maximum voltage: 220VAC/250VDC.

Threaded bushing length: 0.505".

Actuator: sealed 0.663" long.

Dimensions: 1.132" long x 0.627" wide x 0.664" high.

NSN 5930-00-655-1523

Contacts: 3 screw terminals. 

 

Learn More