VISHAY DALE - ITU-1731-4 High Current Toroid Inductor Copper Coil Horizontal Mount 50uH 40A
Special Price
$12.98
Regular Price
$18.50
READY TO SHIP - ONLY 444 LEFT IN STOCK!
SKU
17488
- Buy 10 for $7.98 each and save 39%
- Buy 50 for $6.98 each and save 46%
VISHAY DALE - ITU-1731-4 High Current Toroid Inductor Copper Coil Horizontal Mount 50uH 40A
Toroid inductance coils are important electrical components for preventing electromagnetic interference, widely used in supply circuits, miniature TVs, adapters, DC-DC power modules, various electronic products, etc. The advantage of the toroidal shape is that, due to its symmetry, the amount of magnetic flux that escapes outside the core (Leakage Flux) is low, therefore it is more efficient and thus radiates less Electromagnet Interference (EMI).
Large Low Loss, Ferrite Core with stable electrical operating characteristics maximize inductor efficiency by minimizing copper losses
High-Reliability Low-Resistance Leaded Inductor.
Toroid Cores are Self Shielded requiring no need for an enclosure.
Inductance: 50uH
Current: 40Amp.
Inductance @ 1Vrms, 10Khz, 40Amps DC: 50uH min.
Inductance @ 1Khz w/out DC: 60uH
DC-Resistance: 0.01 Ohms.
Wire Diameter: 1.83mm (0.071") 11 AWG
Core Material: Ferrite
Dimensions: 2.2" Diameter x 1.1" High.
Connections: Quick Connect or PCB Solder Mounting.
Note: Leads are approximately 1" Long and some have 1/4" Quick Connects attached.
Operating Temperature: -55°C to 125°C
Extremely Conservative Design Current Rating.
We counted about 64 turns of 13AWG Enameled Magnet Wire on this High Current Toroid Choke designed to rid audio equipment noise from the lights and props used on a commercial stage.
Applications: Applications: EMI Filters, Buck and Boost Switches, Ballasts, Medical, Telecommunications, Musical Instruments, Industrial Controls, Chokes, Power Supplies, Inverters, Amplifiers and Control Circuits.
Made in USA – Factory New
Large Quantity Available, Discounted Special order Toroid where some units have quick disconnect and other's don't directly from Vishay Dale Factory.
SKU | 17488 |
---|---|
Condition | NS - NEW SURPLUS |
Part Number | ITU-1731-4 |
Alternative Part Number | 6-357, 150507, RD0965 LastCat26-15 |
VISHAY DALE - ITU-1731-4 High Current Toroid Inductor Copper Coil Horizontal Mount 50uH 40A
Toroid inductance coils are important electrical components for preventing electromagnetic interference, widely used in supply circuits, miniature TVs, adapters, DC-DC power modules, various electronic products, etc. The advantage of the toroidal shape is that, due to its symmetry, the amount of magnetic flux that escapes outside the core (Leakage Flux) is low, therefore it is more efficient and thus radiates less Electromagnet Interference (EMI).
Large Low Loss, Ferrite Core with stable electrical operating characteristics maximize inductor efficiency by minimizing copper losses
High-Reliability Low-Resistance Leaded Inductor.
Toroid Cores are Self Shielded requiring no need for an enclosure.
Inductance: 50uH
Current: 40Amp.
Inductance @ 1Vrms, 10Khz, 40Amps DC: 50uH min.
Inductance @ 1Khz w/out DC: 60uH
DC-Resistance: 0.01 Ohms.
Wire Diameter: 1.83mm (0.071") 11 AWG
Core Material: Ferrite
Dimensions: 2.2" Diameter x 1.1" High.
Connections: Quick Connect or PCB Solder Mounting.
Note: Leads are approximately 1" Long and some have 1/4" Quick Connects attached.
Operating Temperature: -55°C to 125°C
Extremely Conservative Design Current Rating.
We counted about 64 turns of 13AWG Enameled Magnet Wire on this High Current Toroid Choke designed to rid audio equipment noise from the lights and props used on a commercial stage.
Applications: Applications: EMI Filters, Buck and Boost Switches, Ballasts, Medical, Telecommunications, Musical Instruments, Industrial Controls, Chokes, Power Supplies, Inverters, Amplifiers and Control Circuits.
Made in USA – Factory New
Large Quantity Available, Discounted Special order Toroid where some units have quick disconnect and other's don't directly from Vishay Dale Factory.