Other Hardware

Hardware, Extra Thick Fender Washers 430 Stainless Steel. For 5/16" Bolts. A fender washer is a flat washer with a larger outer diameter in proportion to its center hole. They are designed to spread the load on thin sheet metal. Interestingly, they are named after their use on automobile fenders. Extra Thick Fend Washer 0.120” Thick Dimensions: 2" OD x 0.343” (11/32) ID Material: 430 Stainless Steel Package of 20 • Fender washers offer a bolt or screw a wider bearing surface that will disperse the load weight to a greater surface area and ensure that the nut or bolt is pressed up against a smooth surface reducing the chances the fastener loosening over time because of contact with an uneven surface as well as keeping a fastener from pulling through a hole that is larger than the diameter of the head. • A fender washer though similar in shape to a standard washer the outside diameter is much larger in proportion to the center hole. • Made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will outperform and outlast all zinc plated fasteners for years without the need to perform costly and time consuming maintenance. • The vast majority of stainless steel fasteners are produced with metals from the austenitic family. Their high levels of chromium and nickel provide tough corrosion resistance and the ability to withstand considerable physical strain without fracturing, albeit at a higher cost than the martensitic varieties.. • Fender Washers made o 430 is a Magnetic Stainless Steel that is Magnetic (Does not contain Nickel) and will outlast washers made of steel or zinc for years to come. Learn More

Leader Tech - LT-2791 - EMI Shielding EMI Shielding.

Leader Tech (HEICO Company) is a world leading innovator and manufacturer of EMI shielding products for circuit boards, electronic enclosures and interconnect cables.

Antenna High Power MTU Shielding.

Customer P/N DX056-13185. Leader Tech P/N LT-2791

Stainless Steel (Non-Magnetic)

Dimensions: Length 5.212" X Width 0.50" X  Depth 0.2875" 

New in Manufacturers Factory Packaging.

 

Learn More

Hardware, gasket. Rectangular 5 x 3" cork gasket. New. Note: (Non adhesive back). Learn More

Hardware, kit. Mount kit for TO-5 / TO-39 devices. New. Package of 2. Learn More

Hardware, kit. Mount kit for 1/4-28 stud devices. New. Learn More

Motorola - HEPA0503 Hardware, Heatsink.

Adapter kit (only) for TO-5 devices.

New.

Learn More

Hardware, kit. For stud devices using 10/32 threads. New. Learn More

Hardware, kit. For TO-36 devices. New. Note: Cross NTE414. Learn More

Hardware, washer. Flat #4. Material: Fibre. Dimensions: 0.120" (3.05mm) ID, 0.250" (6.35mm) 1/4" OD x 0.032" (0.81mm) thick. Package of 100. Learn More

Enclosure, gasket. Waterproof. Dimensions: 3.6" OD x 2.25" wide x 0.245" high. Nema IP 66. New. Learn More

Blank. Material: metal. Dimensions: 1.627" long x 1.190" wide x 0.131" high. COVER or SHIELD ??

Learn More

Unistrut - P1007 Hardware, Nut.

Unistrut products have been helping to build a better world since 1924. Used extensively in nuclear, industrial and commercial construction markets for over 60 years, Unistrut Metal Framing has set the standard for product design, quality and performance.

Brand Name: Unistrut

Finish: Electrogalvanizing

Grade: 45

Material of Construction:  ASTM A1011 SS Steel

Special Features: Part of Complete System

Sub Brand: Metal Framing Components

Thread Size: 0.3125 in

Thread Type: UNC

Type: Channel Nut With Spring

CATALOG DESCRIPTION: 5/16""-18 ELECTRO-GALVANIZED 1-5/8"" CHANNEL NUTS W/SPRING

Category: Screws,Nuts,Bolts,Washers

Note: From manufactures box of 100Pcs/6lbs.

Alternate: P1007EG, 303815, 786364100708, UNSP1007EG.

UPC: 78636410070

Proudly Made in the USA.

Learn More

Quad 4-Position Thumb or Screw Driver Binding Post, Phenolic Terminal Strip Board.

These heavy-duty binding posts were designed with the audiophile in mind. The high-quality plating process eliminates the possibility of corrosion to maintain the highest possible signal transfer and resist harsh environmental conditions.

Key Features

• Satin nickel
• Audiophile quality
• Ideal for high power applications
• Non-oxidizing

Phenolic Strip  0.065" Thick

Contact Material: Brass Nickel Plated Screw Terminals

The large 0.25" diameter knurled head allows for positive finger tight connections. Length 0.50"

Contacts: 4 Position Quick Connect or Solder Terminal Lugs on back of unit.

Terminal Strip Dimensions: 2.875" Long X 0.64" High, Protrudes 0.56" in Back

Secure Electrical Connection for Optimum Performance.

Applications: Speaker sets, Shortwave Radio, Antenna Connections, Audio/Visual, TV, Two Radio, Drake 2a, Etc..

Vintage New Old Stock

Proudly Made in USA

Learn More

CUSTOM - 8-629 - 1/4" Nylon Shaft Extenders, Attenuator Shaft Extension.

Fits 1/4" ID "D" Shape (Half Round) Shaft,

Durable Nylon Extender is Approximately 3" long.

Provides 2.5" Extension. 

Universal Audio or Industrial Applications. 

Great for Recessed Potentiometers, Rotary Switches, Thermostates.

Vintage - New Old Stock - Difficult to Find Hardware

Learn More

Warner Electric - 7430-448-003 - Hardware. Mounting bracket assembly kit. The Warner Electric part number 7430-448-003 is a hardware item that functions as a mounting bracket assembly kit. This bracket is sold separately for use with Warner Electric's Compact Series photoelectric sensors, such as the 7115-448-003 model. • Product Type: Mounting bracket assembly kit • Part Name: 7430-448-003 • Manufacturer: Warner Electric • Purpose: Sold separately as hardware for mounting photoelectric sensors • Compatible Products: Used with Warner Electric's Compact Series sensors, such as the 7115-448-003 Made in USA New Learn More

Hardware kit.Terminal accessory. Learn More

Hardware kit. Spring kit. Learn More

NEW Warner Electric 5180 101 011 Control Collar/Spring Learn More

Hardware, rivet. Blind. Self-plugging mechanically locked stem. Serrated stem-type w. Material: aluminum alloy. Steel comp stem. Fastener length: 0.33" min, 0.35" max. Head: 0.054" min, 0.064" max. Shank: 0.14" min, 0.143" max. Head major diameter: 0.238" min, 0.262" max. Grip length" 0.188" min, 0.250" max. Learn More

Hardware, washer. 1.196" OD (30.4mm) (1-3/16") x 0.064" (1.6mm) with an ID of 0.247" (6.2mm). Material: Nylon. Color: beige. Package of 25. Learn More

Hardware. Transistor covers for TO-3 devices.

Material: thermoplastic polyester.

Package of 10. 

Alternate: Keystone 4634

Learn More

Hardware, nuts. 8/32 wing nuts. Plated. Package of 50. Learn More

Hardware, wire brush. For cleaning motor/commutator. Dimensions: overall the handle 13.5" long. Brush housing is 7" long. Brush extends 5.25" out. Soft steel bristles. Bristles fan out when fully opened. Learn More

Umpco - MS-921333-71 - 5340-00-057-2904 -Hardware, Cable Clamp. 1/2" - 13/64".

Cushioned Metal, Synthetic Rubber Jacketed.

Mount: 5.0mm hole.Diameter: 0.203"

Material Thickness: 0.032"

Center to Center Distance Between Loop and Mounting Hole: 0.656 inches nominal

Distance from Loop Center to Tongue End: 0.875 inches nominal

Loop Inside Diameter: 0.500 inches nominal

Note: Clamp is actually marked MS21333.

Military bags are double marked 5340-00-057-2904.

Applications: Commerical, Industrial, Engine Wiring Harness

 

Learn More