Featured Products

SMK - TV-3 JP27 Pushbutton Power Switch, P/N ES309059

SPDT-Snap Latching.

3A 125 VAC

Brass Solder Lugs - Sealed

Plunger type Push On - Push Off Power Switch.

Mounts on 13/16" centers, 1-1/8" behind panel. 3mm tapped holes

Connection: 3-solder terminals.

U/T, JPN, CSA

Made in Japan - New Old Stock

Used on various consumer audio /Video equipment including Akai GX-620, GX-625, GX-266-2, GX-266ii and other Reel To Reel players.

Learn More

Square D - AN3161P10 - Circuit Breaker.

Push Buton 10Amp.

Thermal Pop-out button.

Class 9311.

Panel Mount on 1.75" Centers.

Dimensions: 2 1/16"" by 1 1/2"" by 3/4"

Terminals: Screw.

NSN: 5925-00-254-2673

Vintage Old Stock

Applications: Boeing 707

Learn More

13-position 26-Contacts Ribbon to edge card connector. Learn More

SSAC - LLC14B2AX – Single Probe Liquid Level Control, New SSAC - Solid State Advance Controls - Acquired by Littelfuse in 2014) is a timer manufacturing industry leader known for its reliable designs that provide long service lives with low maintenance costs. SSAC has been an industry leader since its inception more than 40 years ago. The LLC14B2AX is a specific model of a Littelfuse LLC1 Series single-probe conductive liquid level control, designed for OEM equipment, which automatically manages liquid levels by detecting when a conductive liquid (like water) touches a probe, triggering a pump to fill or drain a tank, with built-in features like a time delay to prevent rapid cycling and adjustable sensitivity to ignore foam. In essence, it's a smart sensor and controller that keeps your liquid levels within set limits, often used to automate pumps in various machines and systems. Key Features & Functionality • Single Probe: Uses one probe to sense the liquid level, along with a common connection. • Conductive Sensing: Works by detecting the electrical conductivity of the liquid between the probe and the common point, using a low-current AC voltage to prevent electrolysis. • Pump Control (Fill/Drain): Can be set to start a pump when the level drops (fill mode) or stop a pump when the level rises (drain mode). • Time Delay: Includes a built-in delay (e.g., 2 seconds for the '2' in the part number Single probe conductive liquid level control. "Fill", Operating Temperature: -20 C to 55 C Pump-up Mode. 2 Seconds. Supply Voltage: 120VAC. Note: Board only, Probe Purchased Separately. Made in USA Applications: Ideal for commercial appliances, water heaters, boilers, and other OEM equipment needing automated liquid management. More info: http://www.ssac.com/files/downloads/30/LLC1.pdf Learn More

SL WABER - X4D-041A Connector, Industrial Power Strip, 250V, 10Amp, Fuse Protected.

SL Waber is the largest supplier of surge protection products to the office products and retail market place and has become a major force in the sale of power protection equipment. 

4 Position, 10Amp 250V. Continuous Duty

Two Resettable Circuit Breakers.

With a 14-3 Conductor SJT power cord.

Length: 8".

Male Plug: Hubble 15A-250V.

Multiple Outlet Strip.

New Old Stock

Learn More

SOLICO - 6-167 - Lamps & Lights.

125VAC 1/3 Watt.

Mount: Snap-in Panel.

Body Material: Nylon

Lens Material: Polycarbonate

Lens: 20.9mm Long x 10.3mm Wide.

Front Panel View Overall: 31.3mm long x 17.2mm.

Hole in Panel must be 31.1mm - 31.5mm Long x 12.00mm - 12.2mm Wide.

Behind Panel: 20.5mm deep.

Contacts: (2) 1/4" Male Quick Connect Terminals.

Color: Red.

New Old Stock

 

Learn More

44-Pin Male Connectot with pins plated goldAlso stamped on the part is Lockhed P/N 6944693-1 , NSN 5935-00-503-5317 Learn More

Transistor, power. Max voltage: 8VEBO. Package: TO-3-8 gold. P/N: HZCA101. Note: Silicon. Military NSN 5961-01-048-0338. Lockheed Martin 6088717-1. Learn More

IC, military. Linear hybrid microcircuit. Lockheed Martin marked 6086636-1 (IBM). Package: TO-3-8 gold leads. Note: Military NSN 5962-01-098-8189. No other information available. Learn More

75 OHM F TO UHF/ VHF SPLITTER TRANSFORMER Learn More

SSAC - SR24A-539 - Solid State Flasher. Timer Module, New. Solid State Flasher. Totally solid state and encapsulated no moving parts to arc and wear out over time and encapsulated to protect against shock, vibration and humidity. High immunity to line noise and transients -designed specifically for moving vehicle applications. Status: Discontinued Timer module 24VAC input. 1 Amp Output. Load is energized for First 1/2 Second after the input power is applied. Connections: 1/4" Male QC Terminals. Mount: Panel. Operating/Storage Temperature: -20° to 60°C / -40° to 85°C Dimensions: 2.015" Long x 2.015" Wide x 0.8" High. New Old Stock. Made in USA Learn More

Relay, timer module. 20A 230VAC 0-150 Second, ext res. On Delay. Fixed, non adjustable. Encapsulated solid-state package with 1/4-inch quick connect tabs. Note: [Will operate on 115 VAC]. Requires heatsink appropriate to any other 20A solid state relay. Learn More

Sprague - 2N4126 Transistor, PNP.

Voltage: 25V.

Current: 200mA.

Dissipation: 625mW.

Operating temperature: -55 to 150 Deg C.

Package: TO-92, plastic.

Note: Silicon.

Package of 10.

Learn More

SIGMA - C9179-X-6749 - Mini Open Frame 12V Form A, Normally Open The SIGMA C9179-X-6749 is a Mini Open Frame Relay with a 12V DC coil. It is commonly found as surplus electronic stock and is designed for basic switching applications. Technical Specifications • Type: Mini Open Frame Relay • Form A: A Form A relay configuration is a Single Pole, Single Throw (SPST), Normally Open (NO) switch that completes a circuit only when the coil is energized. It acts as a "make" contact, meaning it remains open (off) by default and closes (on) to allow current to flow when activated. • Coil Voltage: 11 – 14V DC (Standard 12VDC) • Coil Resistance: 780 Ohms • Contact Material: Silver Alloy • Contact: Configuration: Single Pole, Single Throw (SPST) • Contact Diameter is Approximately 0.0775” indicating low current. • Connections: Four Pin = 0.09” x 0.02” Quick Connect, PCB or Solder • Contact Form: Form A (Single Pole Single Throw, Normally Open) • Mounting: PCB or Two Mounting Holes • Construction: Open Frame, meaning the internal switching mechanism is exposed rather than sealed in a plastic or metal housing. • Approximate Dimensions: 0.96” Height Above PCB x 1.2” Width x 1.2” • Made in USA Learn More

Signal Transformers - PC-24-35 Transformer.

Output: 1VA; Parallel - 12V 70mA or Series - 24VAC, 

Current Output: Parallel - 70 mA, Series  35 mA

Input: 115VAC, 50-500 Hz

Mount: PCB 6 pin.

Dimensions: 25.40mm long x 34.92mm wide x 21.08mm high.

Weight 0.157 lb (71.21 g) 

RoHS compliant. No center tap.

Miniature Low Power Transformers
Signal’s PC low power transformers are designed to operate between
50 Hz and 500 Hz without any degradation in output voltage.

General Specifications
• Dielectric Strength - 1500 Vrms Hipot
•  Insulation System - Class B, 130° C, UL 1446 E66312

Agency Certifications
• UL recognized to UL 506 / UL 5085-2, File # E63829
• CSA certified to C22.2 #66.1, File # 221070

Learn More

SIGNAL TRANSFORMER INC - DPC16-1500 - Dual 8V Laminated Transformer 24VA

Signal’s PC low power transformers are designed to operate between 50 Hz and 500 Hz without any degradation in output voltage.

8V+8V 1.5A

Frequency: 500 Hz

Max Output Current: 1.5 A

Max Power Dissipation: 24 W

Number of Contacts: 8

Output Power: 24 W

Primary Winding(s): Dual

Secondary Winding(s): Dual

Termination: PC Pin

Dimensions: Height 34.9 mm, Height - Seated (Max) 34.93 mm, Length 41.3 mm, Width 57.2 mm

NEW TRANSFORMERS 

Learn More

SIGNAL TRANSFORMER INC - DPC-16-260 Transformer. 4.4VA.

Primary: Dual 115VAC 50-500Hz.

Secondary: Series 16VCT 260mA.

Parallel 8V 520mA.

Type: Laminated Core

Mount: PCB 8 Pin - Through Hole.

Voltage Isolationm: 1500 Vrms

Dimensions: 41.30mm X 31.80mm

Weight: 0.313 lb

Alternate: Mouser 530-DPC-16-260,  Hammond 160F15

Learn More

SIGNAL TRANSFORMER INC - LP-16-1500 - Transformer, Power.

Flathead Low Profile

Ratings: 24VA, 8VAC 3Amp parallel, 16VCT 1.5Amp series. (Dual).

Mount: PCB, 8 pin.

Dimensions: 2.25" wide x 2.818" deep x 1.261" above board.

Learn More

IC. CMOS 4/8 channel analog switch multiplexer. Case: 16 Cdip, pulls/used, ceramic gold leads. Learn More

Relay, reed. Input: DC. Contacts: SPST NO. Contact Ratings: 500mA. Coil Voltage: 5VDC. Coil Current: 500 Ohm. Mech Mtg: PCB. Packaging: 8 Dip. Learn More

SIGNAL TRANSFORMER INC - ST-2-10 -  10VCT@110mA or 5V@220mA

Signal’s ST and DST transformers utilize a dual cavity platform
providing superior isolation and low capacitive coupling. Rigid pin construction for easier board insertion and higher reliability.

Sold for the 1.1VA Split Bobbin PCmount Dual Output Transformer on the board made for Royal Streetlamps measuring 2.8" x 1.7" x1.3"tall. Has a full wave bridge and four resistors, 3 wires marked ON - C - DIM. ST-3-10 Xfmr: Pri:115V Sec:series 10VCT 110mA Out:parallel 5V 220mA. Xfmr:35x29x24mm

ST-2-10 Specifications

Product: Class 2 Transformers     

Primary Voltage Rating:  115 VAC              

Secondary Voltage Rating: 10 V CT/5 V   

Power Rating: 1.1 VA      

Secondary Current Rating: 110 mA/220 mA         

Mounting Style: Through Hole   

Primary Winding: Single Primary Winding             

Secondary Winding: Dual Secondary Winding      

Length:  34.9 mm             

Width:   28.6 mm             

Height:  24.6 mm             

Series:   ST          

Operating Frequency: 50 Hz/60 Hz          

Product Type: Power Transformers

Termination Style: Solder Pin      

Tradename: Split/Tran   

Type: Printed Circuit Mount Transformer

UL, CSA, RoHS Compliant

New

Learn More

Relay 24VDC. Led indicating. Case: Plastic enclosed 8 octal plug in mount. Learn More

Relay 8-28VDC. Led indicating. Input voltage 8-28vdc Photoelectric Amplifiers Open Collector Output capable of loads up to 250ma. @ 28vdc max. Case: Plastic enclosed 8 octal plug in mount. Learn More

Relay 230VAC. Led indicating. Case: Plastic enclosed 11 octal plug in mount. Learn More