Featured Products

Connector, jumper cable. 8 Position female to 8 Position female. Length: 2". Note: VER/8 (F) to 8 (F). Manufactured for the military. Learn More

ELECTRO - 724868 - 9-196 - Magnetic Sensor, Tubular

With 2-Conductor Cable

New Old Stock 

Learn More

3M - 560B - 7000005896 - Connector, Solderless Terminal.

3M Scotchlok Insulation Displacement Connector 560/560B is a double run or tap connector for tap or parallel splicing. It is suitable for general purpose electrical connections on an auto, boat, van or trailer. Polypropylene insulated, self stripping and flame retardant.

Insulation Displacement Connector, Double Run or Tap, 600 Volt, 18 to 16 AWG (Solid/Stranded), 14 AWG (Stranded), Flame Retardant, Polypropylene Insulation, Blue, Bulk.

Scotchlock IDC S/LOK Connector Tap & Parallel.

Self Stripping.

Wire Size: 18 - 16 AWG / 14 AWG Stranded

Ibsukation Outer Diameter: 0.145"

Color: Dark Blue.

Scotchlok, 600V.

Package of 10.

UPC 00054007201816

Learn More

3M - 3666-0002 Connector, PCB Card Edge, Pak 100.

Housing Gender: Receptacle.

Contact Gender: Female.

26 & 20 AWG

Current: 1 Map

Mount: Flange Mount

Circuit count: 30 Position (2 Row) / 60 Contacts.

Pin spacing: 0.1".

Outside dimensions: 3.5" long x 0.433" wide.

Overall 4.390" long with 3.891" mount centers.

Note: Edge card to ribbon cable.

More info: http://multimedia.3m.com/mws/mediawebserver?mwsId=66666UF6EVsSyXTt4Xf6Lxz6EVtQEVs6EVs6EVs6E666666--&fn=ts0011.pdf&fn=ts0011.pdf

Learn More

TE Connectivity Raychem - D06209-000 - ZH2-10.0-0-FSP-SM - Tubing, Heat Shrink, ST Zerohal Polyolefin Black Thin/Single Spool.

Flexible, Highly FlameRetardant, Low Recovery Temperature, ZEROHAL Polyolefin Tubing

Style: Straight, Versafit V2 Tubin

Body Material: Zerohal Polyolefin

Color: Black

Shrink Wall Type: Thin/Single

Inside Diameter Before Shrinking (mm): 10.4

Inside Diameter After Shrinking (mm): 5

Minimum shrink temperature: 70°C [158°F]

Minimum full recovery temperature: 90°C [194°F]

Minimum Operating Temperature (°C): -30

Maximum Operating Temperature (°C): 125

Thickness: 0.56 mm

Packaging: Sold by Complete Reel

Material: Polyolefin (PO) Halogen Free

Features: Flame Retardant Rating UL VW-1

Shrink Ratio: 2:1

Full Reel: 164 Foot Reel (50m)

Applications: Electrical insulation and strain relief of connections and terminations in computers, appliances, and other
commercial electronic products. Jacketing and bundling of light duty harnesses in rail and mass transit vehicles, buildings, and other enclosed areas where emission of toxic gasses from burning materials containing halogens is
very undesirable.

 

Learn More

Unidentified Manufacturer - 4PStrip - Vintage 4 Position Phenolic/Bakelite Terminal Strip, Screw Type Solder Lugs.

Contacts: 4 Screw Terminals with Solder Terminal Lugs on Back of Unit.

4 Tie Down Points.

Phenolic Flush Beau Part

Dimensions: Height 2.10" X Width 1.565" X 0.065" Thickness

Mounting: Four 0.135" Mounting Holes

Applications: Speaker Sets, Shortwave Radio, Antenna Connections, Audio/Visual, TV, Two Radio, Drake 2a, Etc...

Vintage New Old Stock

Proudly Made in USA

Note: See SKU 4169 for a heavier duty more deluxe 3 Position Phenolic/Bakelite Terminal Strip. 

Learn More

General Electric - GE 73 - BP2 - 1w 14v T1.75 Automotive Miniature Lamp, Wedge Base Bulb.

Designed for long and reliable performance under harsh conditions

Voltage Rating: 14V

Current: 0.08A (80mA)

Type: Incandescent

Power: 1 Watt.

Bulb Size T1.75

Size: T10

Base: Wedge, Clear White

Lumens: 4

Candle Power: 0.3

Life: 15000 Hours

Packaged: Bulk

Alternate: ‎23015

UPC 043168230155

Genuine General Electric - New Old Stock - Made in USA 

Applications: Step/Courtesy; Ash tray; Auto Transmission Indicator; Brake Warning; Directional Signal Indicator; Hi-Beam Indicator; Ignition Switch; Instrument, General; Radio dial; Seat Belt Warning and also Applianaces

Learn More

Eaton Bussmann - HPC - Midget Fuse Holder. Rated 600V, 30A, Panel Mount, New

Series: HPC

Screw Type Knob

Package: Bulk

Part Status: Active

Mounting Type: Panel Mount

Fuse Size: 0.394" Dia x 1.496" L (10mm x 38mm) (13/32" x 1 1/2")

Current Rating (Amps): 30 A

For Use With/Related Products: Class CC Fuses, 13/32" x 1-1/2"

Compatible Fuse Series AGU, ATM, ATQ, BAF, BLF, BLN, FLM, FLQ, FNM, FNQ, GGU, HC10S, KLK, KLKD, KLM, KTK, OTM, TRM, Series HPS, Nonindicating, Nonrejection, Fuse Cap Style

Fuse Type: Cartridge, Midget

Temperature: -40 C to 150 C

Fuseholder Type: Holder

Number of Circuits: 1

Voltage: 600V

Termination Style: Solder, Quick Connect - 0.250" (6.3mm)

Alternate: UPC 051712719629

New Old Stock

UL Approved

Learn More

OHMITE - C300K5R0E - Resistor, Corrugated Ribbed Tubular Ceramic.

Corrib® resistors are ideal for applications involving high currents at very low resistance values. These large, heavyduty resistors are designed to withstand frequent start-stop cycles characteristic of motor starting, dynamic braking and other similar applications.

Technology: Industrial Wirewound Ribbed, Series 280.

Resistance: 5 Ohm. 

Power: 300 watt.

Tolerance: 10%.

Maximum Voltage: 1000.

Operating Temperature: 25 C to 400 C

Temperature Coefficient: 400 PPM/C

Mount: Chassis

Termination: Lug

Dimension: 1-1/8" D x 8-1/2" Long. (216mm Long)

Note: Ribbed construction for enhanced cooling.

Vitreous Enamel, Corrugated Resistive Wire.

More info: https://www.ohmite.com/assets/docs/res_280.pdf

Alternates: Mouser 588-C300KR25E, Newark 64H4137

New Old Stock - Made in USA

Learn More

OHMITE - C300KR25E - Resistor, Corrugated Ribbed Tubular Ceramic.

Corrib® resistors are ideal for applications involving high currents at very low resistance values. These large, heavyduty resistors are designed to withstand frequent start-stop cycles characteristic of motor starting, dynamic braking and other similar applications.

Technology: Industrial Wirewound Ribbed, Series 280.

Resistance: 0.250 Ohm. (250 milliOhms)

Power: 300 watt.

Tolerance: 10%.

Maximum Voltage: 1000.

Operating Temperature: 25 C to 400 C

Temperature Coefficient: 400 PPM/C

Mount: Chassis

Termination: Lug

Dimension: 1-1/8" D x 8-1/2" Long. (216mm Long)

Note: Ribbed construction for enhanced cooling.

Vitreous Enamel, Corrugated Resistive Wire.

More info: https://www.ohmite.com/assets/docs/res_280.pdf

Alternates: Mouser 588-C300KR25E, Newark 64H4137

New Old Stock - Made in USA

Learn More

Keystone Electronics - 184 - 30 Volt Battery Holder, Aluminum New

An established design that has gained wide acceptance for commercial and military applications. Batteries are held under constant spring tension assuring low contact resistance. Recommended for use where shock or severe vibration is encountered. 

Clips: Spring Steel, Nickel Plate

Phenolic Base: Type PBE, Per MIL-P-3115C

Contact Eyelets: Brass, Nickel Plate

Frame and Clips: Aluminum 2024-T3

Insulating Washers: Moisture Proof, Resin Impregnated Fibre

Solder Lugs: Brass, Tin Plate

Numer of Cells: 2

Mounting Type: Chassis Mount

Termination Style: Solder Lugs

Battery Cell Size: 2/3A

Battery Holder Dimensions: See Attached Illustration.

Two mounting holes on Bottom 1.912" Spacing.

Chassis Mount.

Solder Lug Terminals.

Heavy Duty - New Old Stock.

Made in USA

Battery Cross Reference: Eveready 413, NEDA 210 

Alternates: Digi-Key 36-184-ND, Mouser 534-184, Newark 35F1638

Learn More

Marathon Kluka - 599GP200402PSB - Terminal Block, 2 Pole, 15A 300V Feed Thru Solder

Housing Gender: 2 Position (2 x 1).

Voltage Rating: 150 V (AC/DC) Class C

Voltage Rating: 300 V (AC/DC) Class B

Currrent Rating: 15 A

Base, Phenolic, 150oC (UL RTI)

Open Back Design JJ (GDI-30F) Material Available

Screws, #5-40 Binder Head, Slot, Brass

Terminals, Plated Brass

Wire Range with Wire Binding Screw   #16 - #22 AWG

UL Recognized File No. XCFR2.E47811

CSA Certified File No. LR19766

RoHS Compliant

Mounting Type: 2 Hole Mount 1.12" centers.

Pin Spacing: Approximately 0.40" (3/8").

Outside Dimensions: 1.41"" Long x 0.56" Wide x 0.41" High.

Black.

New Old Stock

UL, CSA

Learn More

Eaton Bussmann - HPS - Midget Fuse Holder, Rated 600V, 30A, Panel Mount, New

Series: HPS

Bayonet Type Knob

Package: Bulk

Part Status: Active

Mounting Type: Panel Mount

Fuse Size: 0.394" Dia x 1.496" L (10mm x 38mm) (13/32" x 1 1/2")

Current Rating (Amps): 30 A

For Use With/Related Products: Class CC Fuses, 13/32" x 1-1/2"

Fuse Type: Cartridge, Midget

Fuseholder Type: Holder

Number of Circuits: 1

Voltage: 600V

Termination Style: Solder, Quick Connect - 0.250" (6.3mm)

Alternate: UPC 051712740357, Newark 94F2236, Mouser 504-HPS-10

Learn More

Toshiba - MG25J1BS11 Transistor, IGBT.

Status: Discontinued

Max voltage: 600V (.6KV).

Max current: 25Amp.

Package: Module with Hardware.

Made in Japan

New Old Stock

 

Learn More

UID - 421 - Connector, Sockets for Transistors and other TO-66 Components.

Sockets are installed onto chassis using eyelets or screws. Transistor is installed afterwards. Assembly and repairs are simplified since socket will stay in place without transistor mounted. white Insulator ensure the component leads are electrically isolated from chassis.

Status: Discontinued Vintage - New Old Stock 

Material: Phenolic Socket 1.09" x 0.86" x 0.43", with 3 solder terminals.

Color: Brown.

Mount: Chassis

Contacts: Brass, Tin Plated

Applications: Power Transistors, CB Radio 12v Mobil power supply circuits. 

Alternates: NTE421, ECG421

Proudly Made in USA

 

 

Learn More

ALLEN BRADLEY - 700-B220A1 - 700B220A1 - Relay, Contactor.

Status: Discontinued 

Heavy Duty Non Inductive 

600 Volts Max.

Coil Voltage: 120VAC 50/60Hz (600VAC max).

Contacts: 4P with2NC & 2 NO Contacts

Contact Ratings: 10 Amps

Mech Mounting: Panel - Din Rail Relay.

Packaging: Open Frame.

UL Approved

Proudly Made in USA

New Old Stock

Learn More

F Jack Panel Mount F-61 "F" Connector.

The F connector (also F-type connector) is a coaxial RF connector commonly used for "over the air" terrestrial television, cable television and universally for satellite television and cable modems, usually with RG-6/U cable or with RG-59/U cable.

Form Factor: Straight Jack

Gender: Female

Material: Material: Brass Body with Nickel Plating

Type: Solder or crimp stud that extends approximately 0.215" in length.

Mount: Bulkhead Chassis or Panel Mount.

Mounts in 3/8" Chassis Hole

Thread Size: 3/8-32UNEF

Overall Length: 0.80" with 0.365 Protrusion 

Includes Nut and Wavy Washer Hardware

Alternate: Beldon F611CH, Newark 74H9893

Applications: Oil, Gas, defense, nuclear, chemical/petrochemical,marine applications and test equipment. Commonly used in video, CATV, data and telephone communications applications.

New Old Stock - Proudly Made in USA

Learn More

MicroChip - Microsemi - APTM50HM38FG - 4 N-Channel Full-Bridge MOSFET Power Module

Trans MOSFET Array Dual N-CH 500V 90A 12-Pin Case SP6

MOSFET Type: FREDFET 7

Mount: Chassis Mount, Screw

Number of Contacts: 6

Continuous Drain Current: (ID) 90 A

Drain to Source Voltage: (Vdss) 500 V

Fall Time: 77 ns

Gate to Source Voltage (Vgs): 30 V

Input Capacitance: 1.2 nF

Operating Temperature: -40 C to 150 °C

Max Power Dissipation: 694 W

Number of Elements: 4

Power Dissipation: 694 W

Rds On Max: 45 mΩ

Rise Time: 35 ns

Turn-Off Delay Time: 87 ns

Turn-On Delay Time: 18 ns

Approximate Dimensions: See Attached Detailed Diagram

RoHS Compliant

Does not include mounting hardware.

Additional Information: https://www.microsemi.com/document-portal/doc_download/8189-aptm50hm38fg-datasheet

Applications: Welding converters, Switched Mode Power Supplies, Uninterruptible Power Supplies, Motor control

Note: Microsemi Corporation is a wholly owned subsidiary of Microchip Technology Inc.

 

Learn More

WEHO - S-400-24 - Power Supply, DC, Switching. 400 Watt, 24 VDC, 17 Amp

Connect this unit to 110 or 220 Volts AC household power, and it will supply 400 Watts at 24 Volts DC and 17 Amps.

This power supply has been engineered specifically for use with DC motors. Most power supplies designed for use with LED lighting or other electronics will simply shut down when exposed to the high current demands of motors. Built-in current limiting protects the unit from overloads and short circuits. The current limiting feature enables these power supplies to keep functioning through the high-current start-up surges from motors. AmpFlow power supplies will just limit the current to the rated maximum even when a larger load is called for, (like when a DC motor starts up). Also, inductive loads (like motors) can cause damage to power supplies that are not designed for them.

These power supplies also work well in any application where AC line voltage needs to be converted to DC voltage. Other uses include LED lighting, HAM radio, battery charging, and replacing plug-in AC adapters when more power is required.

Short-circuit and overload protections help these units survive harsh operating conditions. The power supply shuts down temporarily if the temperature, current, or voltage goes beyond the safe operating range, and it starts up again automatically when the condition goes away – no rebooting is necessary.

This high-efficiency power supply has an output voltage that is adjustable by plus or minus 10%. It includes an EMI filter to minimize interference with radio signals and a soft-start circuit that reduces the AC inrush current peaks. Every power supply goes through a full-load burn-in test, so no defective unit leaves the factory.

DC output voltage: 24V

DC output current: 17A

DC output voltage error: ±1%

Ripple & noise: 150mV

Efficiency: 86%

AC input voltage range: 85-132VAC/170-264vac 47-63HZ 

Input current: 6.5A/115V 4A/230V

AC inrush current: Soft-Start Current 25A/115V 50A/230V

Leakage current: 3.5mA/240VAC

DC adjustable range: ±10% rated output voltage

Over load protection: 105-135% cut off the output auto -recovery

Over-voltage protection: 115-135 cut off the output auto -recovery

Setup rise hold up time: 200ms 50ms 20ms

Withstand voltage: I/P-O/P:1.5KVAC 1minute, I/P-FG:1.5KVAC 1minute, O/P-O/P:0.5KVAC 1minute

Withstand temperature: -10°C~+60°C,20%-90% RH

Dimensions: 8.5" X 4.5" X 2.0"

Weight: 1.05kg (2 Pounds)

This unit meets all the following safety and EMC standards: UL 1950, EN60950, EN55022, IEC100-3-2, CE, ROHS

Applications: Motor Controllers, CNC, Industrial Automation, LED Strip Lights, CCTV Power Supply , AC/DC Adapter.

Alternates: AmpFlow S-400-24, Meanwell 2-400-24, Mulview S-400-24, Mingwei S-400-24

Factory New

 

Learn More

Hitachi - HN27C256AG-10 - UV Erasable Programmable ROM, 32768-word × 8-bit

Hitachi HN27C256AG is a 256-kbit ultraviolet erasable and electrically programmable ROM, featuring high speed and low power dissipation. Fabricated on advanced fine process and high speed circuitry technique, the HN27C256AG makes high speed access time possible for 16 bit microprocessors such as the 8086 and 68000. And low power dissipation in active and standby modes matches our CMOS 256-kbit EPROM. In programming operation, the HN27C256AG realizes faster programming times than our conventional 256-kbit EPROM by Hitachi’s Fast High-Reliability Programming Algorithm. Pin arrangement, pin configuration and programming voltage are compatible with our 256-kbit EPROM series, therefore existing programmers can be used with the HN27C256AG.

High speed -Access time: 100 ns (max)

• Low power dissipation - Active mode: 25 mW (typ) (f = 1 MHz), Standby mode: 5 µW (typ)
• High reliability and fast programming - Programming voltage: +12.5 V DC 

PGM12.5V

Package: 600-mil 28-pin cerdip (DG-28)

Made in Japan

Alternate: Philips 27C256-20N

 

 

Learn More

HITACHI - A2807-30S-14T -Cable, Rainbow Ribbon. 28-14C. (28 AWG 14 Conductor) Skip Bond, 100 Foot Length Reel.

Hitachi Cable Manchester cable products are designed and manufactured under strict ISO registration guidelines and our own stringent quality control standards to deliver the highest quality cabling solutions available.

Series 23104 - 0.50" Intermittently Bonded Rainbow Ribbon Cable

Conductor Type: Stranded 7/36 Tinned. 

Operating Temp: 105 Deg C.

Max. Voltage: 300

Insulation: Rainbow Multi-Colored PVC, Pitch 0.050", 9 mil.

Applications: Internal Wiring of Electronic Equipment such as computers and Electrical Business Machines.

Additional Information: https://cdn.thomasnet.com/ccp/01041195/111575.pdf

Alternate: 3M 3302/16 100,  Beldon 9R28016000100, RS Pro 359942, RBS-28014

 

Learn More

Japan Servo Motors - KH42HM2-852 - 1.8 Degree 2 Phase Hybrid Stepping Motor

Commerical Quality KH42 Series 800 Type High efficiency, High Torque, Low Vibration and Low Noise Motor.

Much improved quality and performance over the chinese Nema 17 Stepper Motors on Amazon & Ebay! Very nice upgrade for 3D printers at a great price!

This new series 800 type, which maintains the high torque performance of our conventional 500 Type and lower vibration and noise. High efficiency and high torque have been achieved through our intensive research on magnetic circuitry. A unique  tooth profile has been employed through the development of a new  proven theory to achieve low vibration and low noise. 

Specifications 

NEMA 17

Drive Method - Uni-Polar 6 Wire

Bearing Description

Step Angle - 1.8 Degrees/step

Voltage - 24 Volts 

Current - 0.38 Amps/Phase

Winding Resistance - 22.4 Ohms/Phase

Inductance - 21.5 mH/Phase

Holding Torque - 2.0 kgf cm (28 ounce inch)

Detent Torque - 150 gf cm (2.1 ounce inches)

Rotor Inertia - 42 g cm2 (0.23 ounce inches)

Weight -  260 g (0.57 Lbs.) 

Insulation Class JIS Class E (120 C 248F) UL Value Class B-130C 266F)

Insulation resistance  500 VDC 100Mohm min.

Dielectric Strength - 500 VAC 50 Hz 1 minute

Operating Temperature Range 0 - 50C

Allowable Temperature Rise 70 degrees

Dimensions 1.65" X 1.65"  X  1.34" (42mm X 42mm X 34 mm Max) 

Superior in Quality, Reliability, and Durability to the Cheap Chinese copies.

NEMA 17

Drive Method - Uni-Polar 6 Wire

Bearing Description

Step Angle - 1.8 Degrees/step

Voltage - 24 Volts 

Current - 0.38 Amps/Phase

Winding resistance - 22.4 Ohms/Phase

Inductance - 21.5 mH/Phase

Holding Torque - 2.0 kgf cm (28 ounce inch)

Detent Torque - 150 gf cm (2.1 ounce inches)

Rotor Inertia - 42 g cm2 (0.23 ounce inches)

Weight -  260 g (0.57 Lbs.) 

Insulation Class JIS Class E (120 C 248F) UL Value Class B-130C 266F)

Insulation resistance  500 VDC 100Mohm min.

Dielectric Strength - 500 VAC 50 Hz 1 minute

Operating Temperature Range 0 - 50C

Allowable Temperature Rise 70 degrees

Dimensions 1.65" X 1.65"  X  1.34" (42mm X 42mm X 34 mm Max) 

Superior in Quality, Reliability, and Durability to the Cheap Chinese copies.

ApplicatIons: RobotIcs,  3D Printer,  Arduino,  CNC,  Router.

 

 

Learn More

Powerex CM1000HA-25H Power Transistor Module IGBT, 1000 Amp 1200V. Single module.

Collector Emitter Breakdown Voltage: 1.2 kV

Collector Emitter Voltage (VCEO): 3.6 V

Element Configuration: Single

Input: Standard

Input Capacitance: 200 nF

Max Collector Current: 1 kA

Max Power Dissipation: 5.8 kW

Compliance: RoHS Compliant     

Applications: AC motor control. Motion/Servo Control. Uninterruptible power supplies, Welding power supplies. Laser power supplies. Module Case, With Hardware.

 

Learn More

Motor AC, Supply: 230/460V 3-Phase 60Hz. Current: 3.6/1.8A. Speed: 1725 RPM. HP: 3/4 Frame Size: 56C. Continuous duty. Code:N SF:1.0 Permanently lubricated ball bearings. Learn More