Featured Products

CUTLER-HAMMER - SA1RW20 - Switch, Pushbutton.

SPST NC. Ultra Miniature.

bushing: 0.119".

Actuator: Red 0.165".

Dimensions: Body - 0.25" D round x 0.362" high.

Contacts: 2 PCB tab/lugs.

Learn More

Switch, toggle. 3PST 15Amp 125VAC/10Amp 250VAC, 3/4HP 250VAC. No bat. Mount: panel. Contacts: 6 screw terminals. Listed: UL. Learn More

Switch, toggle. 3PDT-15A. On-Off-On. Two threaded hole front panel mounting, 0.89" spacing. Screw terminals, missing screws. bulk pkg'd. Width 1.37" (34.8mm), Height 1.79" (45.5mm), Length 1.77" (45mm) NSN 5930-002403671, Made in the USA. Learn More

Switch, toggle. SPDT 10Amp 250VAC. 3 Position, center off, both sides momentary. Bushing length: 1/2". Lever length: 9/16". Contacts: 3 screw terminals. Learn More

Cutler-Hammer / Eaton - 8788K5 - MS25072-8 Switch, toggle.

SPDT Off/ON(Mom). Heavy duty.

Plate Design: Toggle Switch

Switch Style: Toggle/Joystick

Termination: Type Screw

Contact Material: Brass

Features: Heavy Duty

Maximum Amperage: 20 A

Color: Black

Double marked 8788K5.

Mount: Panel. Two hole mount with 1.792" centers.

Dimensions: 2.147" long x 1.152" wide x 2.535" deep (behind panel).

Contacts: 3 large stud terminals.

Genuine Cutler Hammer - New Old Stock

Learn More

Cutler-Hammer / Eaton * - 8373K8 - Switch, Toggle.

DPST 6Amp @ 125VAC, 3Amp @ 250VDC.

Threaded bushing: 3/8" x 0.355".

Actuator: 0.50".

Dimensions: Overall 1.153" long x 0.687" wide.

Termination: 6 Solder Terminals.

Genuine Cutler Hammer - New Old Stock

Military NSN 5930-00-259-8341.

Learn More

Switch, toggle. DPDT 2 Position 6Amp 125VAC/3Amp 250VAC. Threaded bushing 3/8" D x 0.349" long. Actuator: Bat 0.68". Material: plastic. Mount: panel. Dimensions: 1.172" long x 0.694 wide. Termination: 6 solder terminals. Complete with hardware. Learn More

Safran - Eaton - CUTLER-HAMMER - 8636K2 - Switch, Trigger.

DPST Momentary 16Amp 125VAC/DC, 8Amp 250VAC/DC.

1HP 125VAC/DC.

Tool Handle, Snap Switch, Lockable.

Trigger: Metal.

Mount: 2 Screw.

Termination: 4 Screw.

Dimensions: Length 1.329"

Type: Military Style

Learn More

Relay, reed. Input: DC. Contacts: SPST NO. Coil Voltage: 12VDC. Coil Resistance: 1K Ohm. Mech Mtg: PCB 4 pin. Note: Dry with clamp diode. Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 2Amp 115VAC, 1Amp 28VDC inductive, 4Amp 28VDC resistive. Actuator: On-On. Connection: solder. Mech: PCB or Panel. Body: 13.5mm long x 8.6mm wide x 13.0mm high. Threaded seated bushing 10.1mm D round x 6.3mm high. Actuator 10.8mm long. Note: Miniature. Complete with red rubber sleeve over bat. Learn More

EATON CUTLER-HAMMER - 9-2741-6 Contactor, coil.

24VAC 50/60HZ.

Learn More

CW - CTI 40983 - Switch, Sub-Miniature Slide.

Contacts: SPDT, Maintained On-On.

Contact Ratings: 0.5Amp 125VAC.

Connection: Hook SolderTerminals.

Mech: PCB.

Panel Mount

Features 10,000 Electrical Life Cycles

Panel Hole: 0.397" long x 0.314" wide.

Overall with Mount 0.770" long x 0.314" wide, two mount holes at 0.561".

New Old Stock

Learn More

CTI INDUSTRIES - 433920000 Audio, Connectors.

3.5mm stereo jack.

Dimensions: approximately 12mm wide x 14mm deep x 8.4mm high.

Package of 10.

Alternate: 35RAPC2BHN2

Learn More

EATON CUTLER-HAMMER - D5PR3T1 Relay, Control, DC.

Status: Discontinued

UPC: 782114 45535

Brand: Cutler Hammer, Div of Eaton Corp

Series: D5PR

Contacts: 3PDT

Published Coil Voltage: 24 VDC

Rating @ 120 VAC:16 Amps

Rating @ 220/240/277 VAC:16 Amps

Rating @ 24/28/30 VDC:16 Amps

Max Current:16 Amps

Mounting: Plug In

Termination: 0.250 in. Flat Blade

Enclosure: Plastic

No. of Electrical Conn.:11

Contact Material: Silver Alloy

 RoHS: Yes

Dimensions: H x W x D:2.1 in x 1.37 in x 1.4 in

Note: 1/4HP-120V 1/2HP-240V UL-EQ151M.

NSN: 5945-01-553-8376

KU style.

Proudly Made in USA

Learn More

The kind of connector you'll find on the Aurora, but that's probably a secret - - panel mount receptacle - Cage Nr 67720100-Pin.Note: ALT P/N: CIM01-HN. Learn More

Comet Thru Beam, short range, source 10-30VDC WITH 6 CAMade in the USA Learn More

Switch, toggle. Contacts: 4PDT. Contact Ratings: 15A 115VAC (20Amp Resistive) 400Hz. Actuator: On-On. Connection: 12 solder contacts. Mech: Panel. Body: 1.442" (36.6mm) long x 1.332" (33.8mm) wide x 0.977" (24.8mm) high, plus contacts. Note: Threaded bushing: standard 3/8" D x 11.7mm long. Actuator: 17.1mm long. Complete with hardware. Alt P/N: MS25068-23. Learn More

Cutler-Hammer Eaton - 8906K4920 - Switch, Toggle. Environmental Sealed, Resistant to Dust, Dirt, Spray Extreme Temperatures Contacts: SPDT. Contact Ratings: 15A @ 125VAC, 15A @28VDC. Actuator: Center-Off. Pull-to-Switch. Momentary Both Sides. Requires 0.47" diameter hole to mount, 15-32 Bushing 32 Thread Connection: Screw Terminals with screws, black dress nut, washer, nut and locating ring. Mech: Panel Mount. Thermoset molding materials meet flame retardant requirements Temperature Range: -85°F to +160°F (-65°C to +71°C) Life: 20,000 operations at rated load 40,000 operations mechanical life Note: Must Pull-to-switch either side. Applications: Aircraft-instrument, military-purpose style. Lever lock with lever seal. Made in USA - Mil Grade Lever Lock toggle switch Learn More

Cutler-Hammer / Eaton - ELC-PA10AADT plus 4 I/O Modules

At less than half the size of most PLCs, the Cutler-Hammer. ELC is an ideal solution when space is at a premium and specialized I/O needs present themselves.

(1)-ELC-PA10AADT: Logic Controller

PLC; 10 I/O

6-In 4-Output Module capacity.

Plus (1)-ELC-AN02NANN: Analog 2-point Output unit.

And (2)-ELC-EX08NNAN Digital Input units, 8-point AC.

Plus (1)-ELC-EX16NNDR Digital I/O 8-In and 8-Relay Out Expansion module.

Original boxes and cables, instructions with Instruments.

Additional Information: 66ed730e5dd7fa35cdbdbdff6fa8ca70.pdf

https://www.eaton.com/content/dam/eaton/products/industrialcontrols-drives-automation-sensors/legacy-page---logic-and-io-legacy-products/elc-modular-plcs/IL05003010E%20ELC-PA10AADx%20ELC%20Analog%20Controllers.pdf

New

Learn More

Proximity sensor. Tubular 12mm 1ND NC 2M CBL. Learn More

Cutler-Hammer / Eaton - CH Switch Salesman Sample Kit

Large Assotment of High-Eend Industrial Switches incliusive of Key, Rotary, Pushbutton, Limit, & Special Switches. 

23-piece Switch assortment kit used by Cutler Hammer salesmen.

24 pc counting the Attractive Black Carrying Case.

Proudly Made in USA

Learn More

Cutler-Hammer / Eaton - 8906K4919 Switch, Toggle., Lock Lever. Environmental Sealed, Resistant to Dust, Dirt, Spray Extreme Temperatures Contacts: SPDT. Contact Ratings: 15A 125VAC. Temperature Range: -85°F to +160°F (-65°C to +71°C) Life: 20,000 operations at rated load 40,000 operations mechanical life Requires 0.47" diameter hole to mount, 15-32 Bushing 32 Thread Actuator: Momentary-both-sides, Must Pull-to-switch One side only. Center-Off. Lever Lock with Lever Seal. Connection: Screw Terminals with black dress nut, washer, nut and locating ring. Aircraft-Instrument Military-Purpose Style. (Pull-to-switch On) / Off / (On). Learn More

Cutler-Hammer / Eaton - 6552A-6503 - Cable Accessory.

50/55 Series Cable

2 Conductor

Length: 3 Feet.

Made in the USA.

Learn More

Eaton - Cutler-Hammer - E57-18LU08-D  Switch, Proximity.

Premium Series -Inductive

Output: Normally Open

Sensing Range: 8mm.

Supply: 10-50VDC 200mA.

Max. Load Current: 0.25 Amps

Body Composition: Metallic

Status Indication: LED

Connection: 2-meter 2-conductor unshieded cable.

Body: 18mm diameter, threaded with two nuts.

Non Embedable.

Short Circuit Protected / Reverse Polarity Protection

With Wiring Diagram.

UPC 782113922478

UL, CE Approved.

 

Learn More