Featured Products

CW IND Switch, slide.

Contacts: DP3T ( 3 Position).

Contact Ratings: 3Amp AC, 0.5Amp DC, 125VAC.

Connection: 8 PC Pins.

Mech: Panel, or PCB, Right Angle (Actuator).

Body: 1.174" long x 0.406" wide (Plus Actuator), x 0.363" high.

Four (4) mount pins at approximately 1.149" centers.

Note: Each Adjacent Contact shares its common.

Vintage New Old Stock - Tarnished Terminals

Made in USA 

Learn More

Cutler-Hammer / Eaton - 3-683 Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 6Amp 125VAC, 3Amp 250VAC.

Actuator: One side momentary.

Connection: Solder.

Mech: panel.

Panel hole: 1.345" long x 0.752" wide x 0.791" high.

Threaded bushing 15/32" D x 0.487" long.

Actuator 0.683" long.

Made in the USA.

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 7Amp 115VAC. Actuator: On-(Off). Connection: Solder terminals. Mech: Panel, bushing. Body: 28.8mm long x 16.1mm wide x 22.6mm deep behind panel. Note: Threaded bushing length: 13.0mm. Actuator length:17.4mm. Double marked:ST42B. Complete with hardware. Learn More

Cutler-Hammer / Eaton - 8374K7 Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 6Amp 125V/3Amp 250VAC.

Connection: 6 Wire leads.

Switch Circuit: On - None - On

Mech: Panel, bushing.

Body: 29.3mm long x 17.6mm wide x 19.8mm deep behind panel.

Note: Both position maintained.

Threaded bushing length:12.5mm.

Bushing seat: 1.3mm.

Actuator length: 12.6mm.

Complete with hardware.

UL Approved

Proudly Made in USA

Learn More

Switch, toggle. Contacts: DPDT. Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (3HP 250VAC). Connection: screw terminals. Mech: Panel. Panel hole: 1.433" long x 1.307" wide x 0.974" high. Threaded bushing 3/4 / 32. Actuator: 0.682" long. Note: Special feature: Switch must stop in center position. Can not switch L to R w/o stopping. Complete with hardware. Learn More

Cutler-Hammer - Eaton - 7604K3 - Switch, Toggle. Contacts: 3PDT.

7600 Series 

Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (1HP 1-2-3PH, 115-575VAC).

Connection: Screw Terminals.

Mech: Panel Mount, Two Hole Mount at 0.873" centers.

Panel Hole: 1.861" long x 1.384" wide x 0.85" deep.

Flush Mount 1.440" long x 1.270" wide hole.

Note: Both Positions Maintained.

Genuine Cutler Hammer - New Old Stock

NSN 5930-00-410-4000

Made in USA

 

Learn More

Eaton CUTLER-HAMMER - ST42H - 8809K16 Switch, toggle.

Contacts: SPDT.

Contact Ratings: 10Amp 115VAC.

Actuator: On-Off-On (Mom).

Connection: solder.

Mech: Panel.

Panel hole: 1.140" long x 0.631" wide x 0.626" high.

Standard 15/32" threaded bushing x 0.521" long (seated).

Actuator: 0.675" long.

Note: Complete with hardware.

Learn More

Eaton - Cutler Hammer - SF21SCW191 Switch, toggle.

Contacts: Miniature SPDT.

Contact Ratings: 125VAC 5Amp.

Actuator: On-On.

Connection: solder terminals.

Mech: PCB or Panel with threaded bushing.

Bushing length: 0.311".

Actuator length: 0.414".

Complete with hardware.

NSN: 5930-00-270-1674

Learn More

CUTLER-HAMMER - SC2BXN1 - Switch, Rocker.

Industries Finest Miniature Snap-in, Lighted Rocker Switch. well defined movement, Interlocking actuator, Stainless Steel retainng clip. A very finely manufactured quality momentary rocker switch. 

Contacts: DPDT.

Contact Ratings: 5Amp 125VAC.

Contact resistance: 10 milliohms.

Mechanical Life: 30,000 Cycles

Actuator: On - Center Off - On.

Connection: 8 Solder Terminals.

Mech: Panel, Snap In.

Terminals: Copper with Silver Plating

Dimensions: Body 0.475" X 0.450".

Panel Cutout: 0.736: X 0.657" (18.7 x 16.7 mm)

Behind Panel Dimension .902: (22.9 mm)

Note: No Lamp, No  Lens Cover. Center Off.

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 15Amp 125VAC. Actuator: On-Off(Mom). Connection: solder terminals. Mech: One hole threaded bushing mount/panel. Body: 1.136" long x 0.632" wide x 0.626" high. Note: Bushing length: 0.494". Actuator length: 0.674". Learn More

SAFRAN EATON CUTLER-HAMMER - 8512K15 - Switch, toggle.

Contacts: 4PDT.

Contact Ratings: 15Amp 115VAC.

Actuator: On-On-On.

Connection: Flush terminal screws.

Mech: Panel, bushing 15/32".

Body: 41.8mm long x 33.5mm wide x 32.0mm deep behind panel.

Note: Environmentally sealed switch (watertight). 20,000 Operations at rated load.

Threaded bushing length: 12.1mm.

Actuator length:17.3mm.

Complete with hardware.

New Old Stock- Made in USA

Learn More

CUTLER-HAMMER - 8303K1 - SPST Slide

Mounting: Screw

Switch Type: SPST

Switch Operations: SLide On - Off

Number of Positions: 2

Dimensions: Width: 0.95 in, Height: 0.95 in, Length: 2.65 in

Fface Plate 19mm wide and 55.5mm tall.

The tab on the front for on and off is 12.7mm wire and 31mm high, threaded for your finger touch.

One screw mount centerd 5.3mm below top.

Made in USA

Learn More

Cutler-Hammer / Eaton - 8282K13 Switch, Toggle.

Contacts: SPDT. Full Size

Contact Ratings: 3Amp 125VAC/1Amp 250VAC.

Connection: Solder Terminals.

Switch Circuit: On - None - On

Mech: One hole threaded bushing mount/panel.

Body: 1.7" long x 0.518" wide x 0.53" high.

Note: Bushing length: 0.385".

Actuator length: 0.482".

New Old Stock - Bulk Packaged from Manufacturer

Made in USA

Learn More

CUTLER-HAMMER EATON - 7613K2 - Switch, Toggle.

Contacts: 3PDT.

Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (1HP 1-2PH 125-480VAC, 1HP 3PH 125-600VAC).

Actuator: Center-off ( 3 Positions maintained).

Connection: Solder Terminals.

Mech: Panel.

Panel hole: 46.5mm long x 35.1mm wide x 21.3mm high.

Standard bushing 15/32".

Shaft 0.677" long.

Note: Heavy Duty, 1HP up to 3 Phase.

NSN 5930-00-862-4559

Complete with hardware.

Applications: For appliancews,instruments, small motor drive devices.

Genuine Cutler Hammer - New Old Stock

Learn More

Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC 1/2HP (10Amp 250VAC, 3/4HP 250VAC). Connection: screw. Mech: panel. Body: 1.321" long x 0.745" wide x 0.738" high. Standard 15/32" threaded bushing x 0.351" long. Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (3/4HP 250VAC, 1/2HP 125VAC, 4.2AL 125VAC). Connection: screw. Mech: Panel. Panel hole: 1.135" long x 0.630" wide x 0.625" high. Standard 15/32" threaded bushing x 0.401" long (seated). Learn More

Switch, rotary. Contacts: 3PST. Connection: solder terminals. Note: Bushing length: 0.579" long. Actuator: 1/4" flattened, 0.514" long. Note: 3 Tier. Made in the USA. Learn More

IC. Pulse width modulator. Package: Hermetically sealed, 14 pin flatpack, 7 leads each side (axial), gold plated. Note: Alt P/N: CMP08015/B1/P. Manuf logo: "D". Learn More

IC. Logic ELPD. Synchronous state machine. Erasable and programmable, 66.6MHz. Package: 28 PLCC. Learn More

Cutler-Hammer Eaton - 7506K4 - Switch, Toggle.

The 7500 series general purpose Toggle Switch offers the widest selection of features and the design flexibility to meet a variety of applications. It is available in solder lugs, screw, 0.25-inch spade terminals.

Contacts: SPST.

Contact Ratings: 10Amp 250VAC.

Actuator: On-None-On (Mom).

Connection: Screw.

Mech: Panel.

Panel hole: 1.134" long x 0.637" wide x 0.684" high.

Standard 15/32" threaded bushing x 0.519" long (seated).

Actuator: 0.565" long.

Note: Complete with hardware.

Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 15Amp 125VAC/10A 250VAC, 3/4HP 250VAC. Actuator: center-off (On-None-On). Connection: 3 solder terminals. Mech: PCB / panel. Mount: 1 hole 0.469" D bushing. Body: 1.125" long x 0.624" wide. Note: Bushing length: 0.378" long. Shaft length: 0.632". Learn More

Hardware, mounting feet. Round 1-1/8" D x 1/8" high. Material: foam. Color: black. Pull off the waxed protective covering and apply. Mount: easy-to-install adhesive.Package of 100. Learn More

EATON - CUTLER-HAMMER - 6-168 Lamps & Lights.

Panel indicator, 24V.

Color: Amber. Flush.

Mount: Snap-in.

Dimensions: For hole 29.5mm-32.0mm long x 11.7mm wide, is 21.0mm deep plus contacts behind panel.

Front flange is 32.1mm long x 17.4mm wide.

Contacts: two 1/4" male QC terminals.

Note: Part is actually marked 5752345.

Proudly Made in USA

Learn More

Eaton Cutler-Hammer / Eaton - 3201G-11EA30 Switch, Rocker.

Easy Snap-In Mounting

Contacts: DPST.

Contact Ratings: 16Amp 250VAC 1HP, 125VAC 1/2HP.

Actuator: On-Off.

Illumination: Green.

Connection: 4, 1/4" Quick Connect Terminals.

Mech: snap-in panel mount.

Body: 21.4mm wide x 31.1mm-331.5mm deep, 26.0mm behind panel.

Lamp: 110V.

Life: >100000 Cycles 

New Old Stock

Alternate: TE Connectivity PRFDB1-16F-BG000L, 1634201-5 

Note: Eaton/England.

Learn More