Featured Products

EATON - CUTLER-HAMMER - 6-168 Lamps & Lights.

Panel indicator, 24V.

Color: Amber. Flush.

Mount: Snap-in.

Dimensions: For hole 29.5mm-32.0mm long x 11.7mm wide, is 21.0mm deep plus contacts behind panel.

Front flange is 32.1mm long x 17.4mm wide.

Contacts: two 1/4" male QC terminals.

Note: Part is actually marked 5752345.

Proudly Made in USA

Learn More

Eaton Cutler-Hammer / Eaton - 3201G-11EA30 Switch, Rocker.

Easy Snap-In Mounting

Contacts: DPST.

Contact Ratings: 16Amp 250VAC 1HP, 125VAC 1/2HP.

Actuator: On-Off.

Illumination: Green.

Connection: 4, 1/4" Quick Connect Terminals.

Mech: snap-in panel mount.

Body: 21.4mm wide x 31.1mm-331.5mm deep, 26.0mm behind panel.

Lamp: 110V.

Life: >100000 Cycles 

New Old Stock

Alternate: TE Connectivity PRFDB1-16F-BG000L, 1634201-5 

Note: Eaton/England.

Learn More

Cutler-Hammer  Eaton - 200K11810 - Panel Mount Switch Base Assembly Housing Non-Illuminated

Swwitchbase Housing for an Non-Iluminated Switch.

Current / Voltage Ratings: 5A 125/25V.

Action: SPDT Momentary.

Housing Type: Rectangular.

Contact material: Silver.

Contacts: Solder Tab.

Lens purchased separately.

Learn More

Relay, SSR. 15VDC 16mA Logic out. 10-36VDC in. Packaging: Module I/O. Learn More

Light wand phototransistor in a pen assembly. Bar code reader. (Universal = will work for anything it was meant for). Cord is approximately 15 feet long. Note: 23pcs have a DE9 male & 11 have a circular connectors. Learn More

ALUMINUM HANDLE 5" CENTER TO CENTER 2" HIGH 0.62" WIDE 5.33" LONG INSIDE CURVED FOR THE COMFORT OF USER'S HAND - Nice ! Learn More

Laser HOUSING 1"ID-Round 6.6"Long overall - Complete with Two right angle mirrors and Two round glass Lenses - 2-Piece Black Plastic - NO laser included Learn More

Diode, military. Microware varactor diode. Made in the USA. Learn More

COMLINEAR - IC. Fast Sampling, Track and Hold Amplifier.

Package: 24 CDIP Gold Leads

Hermetically Sealed.

Note: Comlinear is now National.

Military Grade - Rare - New

Proudly Made in USA

Learn More

Crystal oscillators. 5.1332MHZ. Package: 4 Dip can, in a 14 Dip dual inline pkg. Learn More

HYBRID SEMICONDUCTOR NEW 48-PIN SQ HERM SEAL GOLD IC'S MILITARY *264-339429-001 CAGE CODE 90073 CONFIGURATION AXIAL QUAD ARRAY OUTPUT LOGIC FORM COMPLEMENTARY-METAL OXIDE-SEMICONDUCTOR LOGIC DESIGN FUNCTION AND QUANTITY 1 CONTROL Learn More

Current sensing switch 30Amp 5%, max res 0.0004. Double marked RCA 3640834-13. Module: 3.855" long x 0.75" deep x 0.876" tall with heavy gauge tabs on each end. Overall with tabs 6" long. RFE/Removed from equipment. Learn More

Current sensing switch 20Amp 5%, max res 0.0004. Double marked RCA 3640834-10. Module: 3.855" long x 0.75" deep x 0.876" tall with heavy gauge tabs on each end. Overall with tabs 6" long. RFE/Removed from equipment. Learn More

Current sensing switch 34Amp 5%, max res 0.0004. Module: 3.855" long x 0.75" deep x 0.876" tall with heavy gauge tabs on each end. Overall with tabs 6" long. RFE/Removed from equipment. Learn More

Connector, D-Sub. Housing gender: plug. Contact gender: male. Circuit count: DB9. Mounting type: Panel. Pin spacing: crimp/insert. Learn More

CORCOM / TYCO - 1EGG1-2 Connectors, Power.

Power Enry RFI/EMI Filter

1Amp 250V 50/60Hz

Low Leakage (<0.5mA) Flange Mount

Modular, Double Fused (5x20mm - supplied)

.250" (6.3mm) Spade Terminals

Male receptacle IEC320 Standard Power Cord Connector.

For susceptibility applications.

UL CSA VDE listed.

Learn More

COLUMBIA RESEARCH LABS - 610TX - Piezoelectric accelerometer. Triaxial, Used/Removed from Service. The Columbia Research Laboratories Model 610-TX is a triaxial piezoelectric accelerometer designed for simultaneous measurement of vibration and acceleration across three mutually perpendicular axes. It is frequently used for characterizing the dynamic responses of both large and small structures due to its relatively low mass and compact size. Technical Characteristics: • Sensor Type: Miniature shear-type accelerometer inserts bonded into a machined aluminum block. • Charge Sensitivity: 3 +/-0.5 pC/g • Frequency Range: 2 Hz to 5,000 Hz, (with +/-5% Max Linearity) • Weight: Approximately 0.53 Ounces (15 Grams) • Isolation: Isolation: Epoxy bonding provides electrical isolation for use in noisy industrial environments. Mounting and Use The unit is equipped with two mounting holes, allowing it to be either bolted or bonded directly to a test specimen. For optimal performance, it is recommended to be used with a compatible charge amplifier, such as the Columbia Model 4601. Piezoelectric accelerometer. Triaxial. Typical measurements: X=3.96pC/g, Y=4.05pC/g, Z=3.61pC/g. Each in a wooden case. Used/Removed from equipment. Sold As Is. Made in USA New Old Stock Learn More

Connector, IC socket. Dip 40 pin wire wrap leads. More info: http://www.circuitassembly.com/Data_Sheets/s-xww.pdf and http://www.circuitassembly.com/EngineeringDrawings/610209B.PDF Learn More

CIRCUIT ASSEMBLY CORP. - CA24S-T2WW Connector, IC socket.

Dip 24 pin Wire Wrap.

0.6" Row Spacing

More info: http://www.circuitassembly.com/EngineeringDrawings/610209B.PDF

Learn More

CIRCUIT ASSEMBLY CORP. - CA14S-T2WW - Connector, IC Socket.

Circuit Assembly Corporation has been a leader in interface connectors and cable assemblies since the company was founded in1969. Circuit Assembly is a manufacturer of interconnect products, specializing in connectors and cable assemblies.

Type: Dual In-Line Wire Wrap Leads.

Nominal Pitch: 2.54mm (0.100")

Gender: Female

Mount: Through Hole

Operating Temperature: -55 C to 105 C

Dip 14 Pin

Genuine Circuit Assembly Corp Component - New Old Stock

Alternates/Similar: 6100-14W-R, 14TWW3, CSA2203-14GC, CSA2200-14BCST 14, 314-AG36-F, 123-93-314-41-001000, 17C3011

 

Learn More

CIRCUIT ASSEMBLY CORP. - CA08S-T2WW - Connector, IC socket.

Dip 8 pin wire wrap leads.

Alternatea: Aries 08-3508-20, 08-6501-20, 08-503-21

Learn More

CISCO SYSTEMS - 73-8545-02 Rev. 07 - High-Speed WAN Interface Card, (HWIC) PWB, New Device Type: It is an internal hardware component, specifically a printed circuit board for an HWIC module used in Cisco integrated services routers. A HWIC (High-Speed WAN Interface Card) slot is a modular expansion slot on Cisco Integrated Services Routers (ISRs) designed for increased data throughput compared to standard WIC slots. It supports WAN connections, serial ports, and Ethernet, offering up to 400 Mbps of bandwidth. They are commonly found on Cisco 1800, 2800, 3800, and some ISR G2 series routers. HWIC Board, Requires Plug-in Power Supply Other PWB Markings: FHH0715001P, 28-6258-02 Contains Pulse H2008 0249-J Chip Installation & Configuration Guides You can find official documentation for this hardware on the Cisco Support Portal. 1. Hardware Installation: Follow the Installing Cisco Interface Cards guide to physically seat the card in an open HWIC slot. Step 1: Power off the router. Step 2: Remove the blank faceplate from the HWIC slot. Step 3: Align the card with the guide rails and slide it in until the connectors seat. Step 4: Tighten the captive screws and power on the device. 2. Configuration: Use the HWIC-4ESW Configuration Guide for setting up VLANs and Layer 2 switching. Note that ports on this card are Layer 2 only; you cannot assign IP addresses directly to physical ports. Instead, you must create a VLAN Interface (SVI). Learn More

HWIC VMS052200EF Boards "Latest Smart Inj" Learn More

Connectors, IDC. Male 9-pin. Cable exit: 180-degrees. Body Material:Steel. Body Plating:Zinc. Contact Plating:Gold. Shell size: E, A, B, C. Contact termination:Through Hole. Gender:Plug Learn More